Development of ester-based drilling fluids for wellbore enhancement

QR Code

Development of ester-based drilling fluids for wellbore enhancement

Ester-based drilling fluid has been accepted as an alternative to mineral oils in drilling applications and currently being usedin oil or gas wells exploration around the world. However, the ester has many deficiencies such as high kinematic viscosity andpoorthermal and oxidative stabilities whichli...

Full description

Bibliographic Details
Main Author:	Ismail Jassim, Lina
Format:	Thesis
Language:	English
Published:	2015
Subjects:	Drilling muds
Online Access:	http://psasir.upm.edu.my/id/eprint/58001/ http://psasir.upm.edu.my/id/eprint/58001/1/ITMA%202015%209RR.pdf

Similar Items

Bioremediation of drill cuttings from oil based muds
by: Turner, Katharine Patricia
Published: (2002)

Use of cassava derivative in water based drilling mud
by: Samavati, Raheleh
Published: (2016)

Microwave treatment of oil contaminated drill cuttings produced on offshore oil platforms
by: Ogunniran, Oluwatosin
Published: (2017)

Microwave processing of oil contaminated drill cuttings
by: Pereira, Igor S. M.
Published: (2013)

Development of graphene-enhanced ester-based drilling fluid
by: Razali, Siti Zulaika
Published: (2019)

Utilization and disposal of drilling mud waste in Libya
by: Kazouri, Abdelbasat
Published: (2020)

Rheological properties and slurry behaviour in hard rock drilling
by: Kamyab, Mohammadreza, et al.
Published: (2013)

Closed-bottle biodegradation test for synthetic-based drilling fluids under Australian conditions
by: Bakhtyar, Sajida, et al.
Published: (2011)

Determination of safe mud weight windows for drilling deviated wellbores: A case study in the North Perth Basin
by: Le, K., et al.
Published: (2012)

Investigation of drilling parameters indicators
by: Fasheloum, Mohammed
Published: (1997)

Toxicity assessment of individual ingredients of synthetic-based drilling muds (SBMs)
by: Bakhtyar, Sajida, et al.
Published: (2012)

The Architecture of Discipline The Perth Drill Hall
by: Stephens, John
Published: (2004)

Optimization of nano-silica in enhancing the properties of synthetic based drilling fluids for tight gas reservoir conditions
by: Ndubi, Mathews, et al.
Published: (2019)

Coiled Tube Turbodrilling: A proposed technology to optimise drilling deep hard rocks for mineral exploration
by: Mokaramian, A., et al.
Published: (2013)

Feasibility analysis of drill bit tracking using seismic while drilling technique
by: Sun, Baichun, et al.
Published: (2012)

Using relative permeability curves to evaluate phase trapping damage caused by water-based and oil-based drilling fluids in tight gas reservoirs
by: Murickan, G., et al.
Published: (2012)

Experimental and numerical investigation on friction drilling of difficult-to-machine materials
by: Dehghan, Shayan
Published: (2019)

An investigation into whether the laser drilling capabilities of a 2kW fibre laser can be enhanced using pulse train shaping
by: Markcoons, D.J.W., et al.
Published: (2018)

Evaluation of formation damage caused by drilling fluid in deviated wellbore
by: Md Yassin, Abu Azam, et al.
Published: (1993)

Synthesis and optimization of 2-ethylhexyl ester as base oil for drilling fluid formulation
by: Ismail Jassim, Lina, et al.
Published: (2016)

Investigating the Efficacy of Adhesive Tape for Drilling Carbon Fibre Reinforced Polymers
by: Prakash, Chander, et al.
Published: (2021)

Turbodrills design and performance analysis for efficient drilling in hard rocks
by: Mokaramian, A., et al.
Published: (2012)

Challenges of cuttings transport in micro–borehole coiled tubing drilling for mineral exploration
by: Kamyab, Mohammadreza, et al.
Published: (2012)

Tool condition monitoring of friction drilling process using adaptive neuro-fuzzy inference system
by: Abdul Mutalib, Mohd Zurrayen
Published: (2021)

Material substitution of coil tubes in CT drilling technology for hard rocks
by: Roufaill, Reem, et al.
Published: (2012)

Effects of lime on ester based drilling fluid
by: Razali, Siti Zulaika, et al.
Published: (2017)

Nonionic polyol esters as thinner and lubricity enhancer for synthetic-based drilling fluids
by: Kania, Dina, et al.
Published: (2018)

Development of a mixing device for red mud flocculants.
by: Dougherty, David J.
Published: (1999)

Kajian tahap kesedaran murid-murid sekolah menengah di Wilayah Persekutuan Kuala Lumpur mengenai bahaya kebakaran
by: Sitam, Matlin
Published: (1998)

Artificial neural network model for prediction of drilling rate of penetration and optimization of parameters
by: Bataee, M., et al.
Published: (2014)

Ester-based drilling fluids toward improved filtration properties performance
by: Kamis, Azmi, et al.
Published: (2000)

Load-settlement modelling of axially loaded drilled shafts using CPT-based recurrent neural networks
by: Shahin, Mohamed
Published: (2014)

Feasibility study of palm oil esters as based fluid in drilling operation
by: Ismail, Abdul Razak, et al.
Published: (2001)

Scientific drilling projects in ancient lakes: integrating geological and biological histories
by: Wilke, Thomas, et al.
Published: (2016)

Design of an ultra-speed Lab-Scale drilling rig for simulation of high speed drilling operations in hard rocks
by: Rasouli, Vamegh, et al.
Published: (2013)

A log based analysis to estimate mechanical properties and in-situ stresses in a shale gas well in North Perth Basin
by: Archer, S., et al.
Published: (2012)

Polyol esters as thinner and biolubricant additive for synthetic-based drilling fluid
by: Kania, Dina
Published: (2019)

Preliminary Study of Jatropha Curcas Oil as Ester-Based Drilling Fluids
by: Sonny Irawan, Sonny, et al.
Published: (2010)

Formation damage using palm oil ester based drilling fluid
by: Md., A. A., et al.
Published: (2008)

Development of hybrid problem solving method for subsea industry
by: Md Tohit, Khairul Nizam
Published: (2018)