Development of dry film lubricants for highly loaded contacts

QR Code

Development of dry film lubricants for highly loaded contacts

This thesis motivated by concerns over fretting damage in the aerospace engine disc dovetail joint in Ti6Al4V. The dovetail joint behaviour was investigated using a cylinder-on-flat contact geometry setup and fretting amplitude of 300 µm, a frequency of 2.5 Hz and load of 575 N was used. The thesis...

Full description

Bibliographic Details
Main Author:	Barman, Kanika
Format:	Thesis (University of Nottingham only)
Language:	English
Published:	2016
Subjects:	Fretting contact loads surface Engineering dry film lubricant polymer lubricants additives friction
Online Access:	https://eprints.nottingham.ac.uk/35850/

Similar Items

The synthesis of orthoesters and their role as delivery systems for lubricant additives
by: Roy, Charlotte
Published: (2020)

The effect of fretting conditions on the lifetime of aero-engine dry film lubricants systems
by: Laolu-Balogun, Emmanuel
Published: (2023)

The roles of contact conformity, temperature and displacement amplitude on the lubricated fretting wear of a steel-on-steel contact
by: Warmuth, A.R., et al.
Published: (2016)

Elastohydrodynamic Analysis of Rolling Line Contact Using Boundary Element Method
by: Onsa, Mahmoud Hassan
Published: (2001)

Effects of surface roughness on local friction and temperature distributions in a steel-on-steel fretting contact
by: Qin, W., et al.
Published: (2018)

Synthesis Of Hydroxyl-Alkoxylate Fatty Esters From Methyl Esters Of Palm Fatty Acid Distillate And Their Potential Application As Lubricant-Based Stock
by: Lee, Pei Luan
Published: (2010)

Oil film behaviour in hydrodynamic lubrication of journal bearing / Mohamad Ali Ahmad
by: Ahmad, Mohamad Ali
Published: (2014)

Development of automatic device for the prediction of next oil change requirement for an automobile / Mustafa Stapah@Salleh
by: Stapah@Salleh, Mustafa
Published: (2017)

Biodegradation of phenanthrene and pyrene using bacteria isolated from used vehicle lubricant-contaminated soil
by: Darma, Umar Zubairu
Published: (2017)

Surface texturing on dry-lubricated transmissions and power systems to deliver better performance and simplified systems in aerospace engineering
by: Ding, Liang
Published: (2021)

Synthesis of jatropha biolubricant using sodium methoxide as catalyst
by: Gunam Resul, Mohamad Faiz Mukhtar
Published: (2012)

The growth of thin lubricating films of plant oils
by: Chua, Wenhsi, et al.
Published: (2011)

Formulation, performance evaluation and prediction of bio-lubricant for journal bearings / Diyar I. Ahmad
by: I. Ahmed, Diyar
Published: (2014)

Synthesis of palm oil-based epoxidized trimethylolpropane esters as oxidatively stable lubricant
by: Naidir, Ferra
Published: (2011)

Polyol esters as thinner and biolubricant additive for synthetic-based drilling fluid
by: Kania, Dina
Published: (2019)

Analisa ke atas minyak pelincir / Razak Awang … [et al.]
by: Awang, Razak, et al.
Published: (1997)

Application of coolants during tool-based machining – A review
by: Yang, Khor Zheng, et al.
Published: (2023)

Batch Production of Trimethylolpropane Ester From Palm Oil as Lubricant Basestock
by: Sulaiman, Siti Zubaidah
Published: (2006)

Synthesis and characterisation of CaO-xSrO catalyst for production of palm-based trimethylolpropane triesters
by: Tan, Ivan Choon Tah
Published: (2017)

Improvement in lubricating properties of engine oil by blending with palm oil, trimethylolpropane ester and nanoparticles
by: Rasheed, Hussein Saeed
Published: (2019)

The study of the dynamic thickness of organic boundary films under metallic sliding contact
by: Chua, Wen Hsi, et al.
Published: (2010)

Topography orientation effects on friction and wear in sliding DLC and steel contacts, part 3: Experiments under dry and lubricated conditions
by: Holmberg, Kenneth, et al.
Published: (2021)

Evolution of damage in MoS2-based dry film lubricants (DFLs) in fretting wear – the effect of DFL thickness and contact geometry
by: Barman, K., et al.
Published: (2017)

Numerical Simulation of Turbine Blade Heat Transfer Using Two-Equation Turbulence Models
by: Elfaghi, Abdul Hafid M.
Published: (2000)

The Dynamic Wheel-Rail Contact Stresses for Wagon on Various Tracks
by: Xia, F., et al.
Published: (2008)

An experimental study on the key fretting variables for flexible marine risers
by: O’Halloran, S.M., et al.
Published: (2018)

Negative results: Investigations into the quantification of silicone-based condom lubricants in solution by DRIFTS-FTIR
by: Burnier, Celine, et al.
Published: (2022)

Wear mechanism of TC4 titanium alloy with TiN coating against self-lubricating fabric
by: Zhao, Song, et al.
Published: (2023)

A modified oil lubrication system with flow control to reduce crankshaft bearing friction in a litre 4 cylinder diesel engine
by: Shayler, Paul J., et al.
Published: (2016)

The effect of weak inertia in rotating high-aspect-ratio vessel bioreactors
by: Dalwadi, Mohit P., et al.
Published: (2018)

Fretting wear mapping: the influence of contact geometry and frequency on debris formation and ejection for a steel-on-steel pair
by: Warmuth, A.R., et al.
Published: (2015)

The role of frictional power dissipation (as a function of frequency) and test temperature on contact temperature and the subsequent wear behaviour in a stainless steel contact in fretting
by: Jin, X., et al.
Published: (2015)

Development Of A novel TEHL to CFD coupling methodology in OpenFOAM
by: Layton, James
Published: (2025)

The role of a thermally sprayed CuNiIn underlayer in the durability of a dry-film lubricant system in fretting: a phenomenological model
by: Barman, K., et al.
Published: (2018)

Ionic Liquids as Potential Lubricants and Thermal Fluids in Electric Vehicles
by: Stavenuiter, Kent
Published: (2024)

Optical Methods of Imaging In-plane and Normal Load Distributions Between Contacting Bodies
by: Tompkins, Christopher G
Published: (2023)

Derivation of a wear scar geometry-independent coefficient of friction from fretting loops exhibiting non-Coulomb frictional behaviour
by: Jin, X., et al.
Published: (2016)

Feasibility Study of Adopting Minimal Quantities of Lubrication for End Milling Aluminium
by: Boswell, Brian, et al.
Published: (2012)

Tribological properties of fabric self-lubricating liner based on organic montmorillonite (OMMT) reinforced phenolic (PF) nanocomposites as hybrid matrices
by: Fan, B., et al.
Published: (2015)

Effect of Cutting Fluid Supply Strategies on Surface Finish of Turned Parts
by: Islam, Mohammad Nazrul, et al.
Published: (2011)