Relationship between flank wear and cutting force on the machining of hard martensitis stainless steel by super hard tools
In this study, flank wear on CBN and PCBN tools due to cutting forces were studied. Turning tests were carried using cutting speeds of 100, 125, 150, 175 and 200 m/min with feed rates of 0.10, 0.20 and 0.30 mm /rev and constant depth of cut of 1.00 mm. The performances of cutting tools were eva...
| Main Authors: | , |
|---|---|
| Format: | Article |
| Published: |
World Congress on Engineering 2010
2010
|
| Subjects: | |
| Online Access: | http://eprints.uthm.edu.my/3918/ http://eprints.uthm.edu.my/3918/1/sivaprakanam_7_U.pdf |