Above ground Microbial Decay Test of Biocide Treated and Untreated Wood Exposed to Danish and Humid Tropical Climates
A co-operative study was initiated to compare the aboveground field decay test of untreated and preservative-treated timbers under Nordic (Danish) and a representative humid tropical (Malaysian) environment according to CEN standard method. Matched specimens of untreated and both preservative-imp...
| Main Authors: | , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
IRGWP
2016
|
| Subjects: | |
| Online Access: | http://ir.unimas.my/16068/ http://ir.unimas.my/16068/ http://ir.unimas.my/16068/1/Above%20ground%20Microbial%20Decay%20Test%20of%20Biocide%20Treated%20and%20Untreated%20%28abstract%29.pdf |
| Summary: | A co-operative study was initiated to compare the aboveground field decay test of
untreated and preservative-treated timbers under Nordic (Danish) and a representative
humid tropical (Malaysian) environment according to CEN standard method. Matched
specimens of untreated and both preservative-impregnated and surface-treated wood were
simultaneously exposed at The Danish Technological Institute (DTI) and The Forest
Research Institute Malaysia (FRIM) campuses. The aim was to demonstrate conclusively
that accelerated decay of untreated wood in field tests according to CEN methods
prevailed under such tropical environments. It could be of considerable use to the
Scandinavian and European manufacturers of wood protecting biocides intending to
challenge treated test specimens to this tropical condition. Of significance, by the
ENV12037 lap-joint method, pine sapwood lap-joints were deteriorated to rating 3
(adopting a 5-point decay/stain rating scale) within 1.5 years at FRIM, while
corresponding specimens exposed at DTI showed no signs of deterioration (rating 0).
After 37 months (3 years), spruce was starting to decay at FRIM (rating 2) but not at DTI.
Specimens vacuum pressure treated according to the Nordic Hazard Class of NTR Class
AB were not deteriorated after 3 years’ exposure at either DTI or FRIM. Painted
specimens exposed at DTI already showed signs of peeling after 6 months, while initial
peelings of the matched coated specimens exposed at FRIM were observed only after 1.5
years. The uniform tropical climate with a constant high relative humidity did not affect
the adhesion of the coatings to the wood in the same way as the Danish climate. Indeed,
there is a strong indication that the rate of fungal degradation (preferably soft rot decay
and basidiomycete attack) is appreciably increased in Malaysian (humid tropical)
compared to Danish (Nordic temperate) environments. |
|---|