Resistance spot welding of stainless steel and mild steel
Resistance spot welding (RSW) is commonly used in manufacturing and automotive industry; because of their advantages such as high speed and high production, suitability for automation, easily to process and low cost. This project deals with the investigation of microstructure and mechanical properti...
| Main Author: | |
|---|---|
| Format: | Undergraduates Project Papers |
| Language: | English |
| Published: |
2012
|
| Subjects: | |
| Online Access: | http://umpir.ump.edu.my/id/eprint/6524/ http://umpir.ump.edu.my/id/eprint/6524/ http://umpir.ump.edu.my/id/eprint/6524/1/CD6908.pdf |
| id |
oai:umpir.ump.edu.my:6524 |
|---|---|
| recordtype |
eprints |
| spelling |
oai:umpir.ump.edu.my:65242015-03-03T09:30:53Z http://umpir.ump.edu.my/id/eprint/6524/ Resistance spot welding of stainless steel and mild steel Wan Muhammad Hafizi , Wan Hassan TA Engineering (General). Civil engineering (General) Resistance spot welding (RSW) is commonly used in manufacturing and automotive industry; because of their advantages such as high speed and high production, suitability for automation, easily to process and low cost. This project deals with the investigation of microstructure and mechanical properties of weld joint of Stainless Steel and Mild Steel. The main objective of this project is to investigate the weldability of stainless steel and steel weld. For design of experiment, Taguchi method was employed by using Minitab software, and total nine (9) sets experiment was conducted. The studies of mechanical properties, are consists by using three (3) tests; Tensile test, Charpy test, and microstructure to analyze and investigate the weldability of Stainless Steel and Mild Steel sheet. As a result, higher Tensile strength and Charpy toughness is due to increase in width and depth of weld nugget. Optimum specimen has higher width and depth than experimental specimen. Based on Taguchi analysis, the best combination of parameters is Current (5.0 kA), Weld Time (3.0 cycle) and Pressure (40 psi). The rank of parameter affected the resistance spot welding experiment is Current, Pressure and Weld Time respectively. Based on Regression analysis, the equation of Tensile strength and Charpy toughness were generated. As for recommendation, the other parameters such as diameters of electrode and hold time can be added in experiment. For conclusion, Taguchi analysis is verified with verification experiment. 2012-06 Undergraduates Project Papers NonPeerReviewed application/pdf en http://umpir.ump.edu.my/id/eprint/6524/1/CD6908.pdf Wan Muhammad Hafizi , Wan Hassan (2012) Resistance spot welding of stainless steel and mild steel. Faculty of Mechanical Engineering , Universiti Malaysia Pahang. http://iportal.ump.edu.my/lib/item?id=chamo:77781&theme=UMP2 |
| repository_type |
Digital Repository |
| institution_category |
Local University |
| institution |
Universiti Malaysia Pahang |
| building |
UMP Institutional Repository |
| collection |
Online Access |
| language |
English |
| topic |
TA Engineering (General). Civil engineering (General) |
| spellingShingle |
TA Engineering (General). Civil engineering (General) Wan Muhammad Hafizi , Wan Hassan Resistance spot welding of stainless steel and mild steel |
| description |
Resistance spot welding (RSW) is commonly used in manufacturing and automotive industry; because of their advantages such as high speed and high production, suitability for automation, easily to process and low cost. This project deals with the investigation of microstructure and mechanical properties of weld joint of Stainless Steel and Mild Steel. The main objective of this project is to investigate the weldability of stainless steel and steel weld. For design of experiment, Taguchi method was employed by using Minitab software, and total nine (9) sets experiment was conducted. The studies of mechanical properties, are consists by using three (3) tests; Tensile test, Charpy test, and microstructure to analyze and investigate the weldability of Stainless Steel and Mild Steel sheet. As a result, higher Tensile strength and Charpy toughness is due to increase in width and depth of weld nugget. Optimum specimen has higher width and depth than experimental specimen. Based on Taguchi analysis, the best combination of parameters is Current (5.0 kA), Weld Time (3.0 cycle) and Pressure (40 psi). The rank of parameter affected the resistance spot welding experiment is Current, Pressure and Weld Time respectively. Based on Regression analysis, the equation of Tensile strength and Charpy toughness were generated. As for recommendation, the other parameters such as diameters of electrode and hold time can be added in experiment. For conclusion, Taguchi analysis is verified with verification experiment. |
| format |
Undergraduates Project Papers |
| author |
Wan Muhammad Hafizi , Wan Hassan |
| author_facet |
Wan Muhammad Hafizi , Wan Hassan |
| author_sort |
Wan Muhammad Hafizi , Wan Hassan |
| title |
Resistance spot welding of stainless steel and mild steel |
| title_short |
Resistance spot welding of stainless steel and mild steel |
| title_full |
Resistance spot welding of stainless steel and mild steel |
| title_fullStr |
Resistance spot welding of stainless steel and mild steel |
| title_full_unstemmed |
Resistance spot welding of stainless steel and mild steel |
| title_sort |
resistance spot welding of stainless steel and mild steel |
| publishDate |
2012 |
| url |
http://umpir.ump.edu.my/id/eprint/6524/ http://umpir.ump.edu.my/id/eprint/6524/ http://umpir.ump.edu.my/id/eprint/6524/1/CD6908.pdf |
| first_indexed |
2018-09-07T00:53:24Z |
| last_indexed |
2018-09-07T00:53:24Z |
| _version_ |
1610908019407716352 |