Analysis of Dry Turning Process of AISI316 for Coated and Uncoated Insert Tools Based on Economical Method
Sustainability and clean of production are of importance in the machining processes where high energy amount is consumed. Reducing the power consumption during machining process can significantly improve the economical and environmental performance of manufacturing systems. The objective of this r...
| Main Authors: | , |
|---|---|
| Format: | Conference or Workshop Item |
| Language: | English |
| Published: |
Universiti Malaysia Pahang
2016
|
| Subjects: | |
| Online Access: | http://umpir.ump.edu.my/id/eprint/15775/ http://umpir.ump.edu.my/id/eprint/15775/ http://umpir.ump.edu.my/id/eprint/15775/1/P092%20pg683-692.pdf |
| Summary: | Sustainability and clean of production are of importance in the machining processes where high energy
amount is consumed. Reducing the power consumption during machining process can significantly improve the
economical and environmental performance of manufacturing systems. The objective of this research is to evaluate
the coated and uncoated carbide insert performance in hard turning process for AISI 316 in terms of power
consumption, and tool wear. Economical method was study by developed a new cost modeling by integrated different
cost estimation methods based on energy and tool life considerations. The performance of Coated Carbide and
Uncoated Carbide tools were evaluated under dry turning process. The influence of cutting parameters of cutting
speed, feed rate, and depth of cut analysis based on energy consumption and economical method. The optimum cutting
condition that provide minimum consumed of energy was found at parameters, cutting speed (100 m/min), feed rate
(0.15 mm/rev) and depth of cut (0.8mm). The study concluded that the out performance of uncoated carbide inserts
can be implemented in hard turning applications and extreme cutting conditions can reduce of energy and saving
machining cost. |
|---|