Surface morphology study in high speed milling of soda lime glass
Soda lime glass has a wide range of applications in optical, bio-medical and semi-conductor industries. It is undeniably a challenging task to produce micro finish surface on an amorphous brittle solid like soda lime glass due to its low fracture toughness. In order to obtain such a finish surface,...
| Main Authors: | , , , |
|---|---|
| Format: | Conference or Workshop Item |
| Language: | English English |
| Published: |
American Institute of Physics Inc.
2018
|
| Subjects: | |
| Online Access: | http://irep.iium.edu.my/64021/ http://irep.iium.edu.my/64021/ http://irep.iium.edu.my/64021/ http://irep.iium.edu.my/64021/1/64021_Surface%20morphology%20study%20in%20high%20speed.pdf http://irep.iium.edu.my/64021/2/64021_Surface%20morphology%20study%20in%20high%20speed_SCOPUS.pdf |
| Summary: | Soda lime glass has a wide range of applications in optical, bio-medical and semi-conductor industries. It is
undeniably a challenging task to produce micro finish surface on an amorphous brittle solid like soda lime glass due to its low fracture toughness. In order to obtain such a finish surface, ductile machining has been exploited, as this usually cause’s plastic flow which control crack propagation. At sub-micro scale cutting parameters, researchers achieved nano finish surface in micro milling operation using coated tool. However it is possible to enhance the rate of material removal
(RMR) of soda lime glass at flexible cutting condition. High speed cutting at micro meter level, extend of thermal softening might be prominent than the strain gradient strengthening. The purpose of this study was to explore the effects of high cutting speed end milling parameters on the surface texture of soda lime glass using uncoated carbide tool. The spindle speed, depth of cut and feed rate were varied from 20,000 to 40,000 rpm, 10 to 30 mm/min and 30 to 50 μm respectively. Mathematical model of roughness has been developed using Response Surface Methodology (RSM). Experimental verification confirmed that surface roughness (Ra) 0.38μm is possible to achieve at increased RMR, 4.71
mm3/min. |
|---|