Performance evaluation of uncoated carbide tool in high speed drilling of Ti6Al4V

QR Code

Performance evaluation of uncoated carbide tool in high speed drilling of Ti6Al4V

This paper presents the experimental investigation into the performance of the uncoated carbide tool when high speed drilling (HSD) of Ti6Al4V. Machining responses such as thrust force, torque, vibration, chip formation and surface integrity of drilled surface were evaluated at various cutting condi...

Full description

Bibliographic Details
Main Authors:	Abd. Rahim, Erween, Kamdani, Kamaruddin, Sharif, Safian
Format:	Article
Published:	The Japan Society of Mechanical Engineer 2008
Subjects:	TJ Mechanical engineering and machinery
Online Access:	http://eprints.utm.my/8676/

Similar Items

Performance of coated- and uncoated-carbide tools when drilling titanium alloy—Ti–6Al4V
by: Sharif, Safian, et al.
Published: (2007)

Investigation on Tool Life and Surface Integrity when Drilling Ti-6Al-4V and Ti-5Al-4V-Mo/Fe
by: Abd. Rahim, Erween, et al.
Published: (2006)

Investigation of tool life and surface integrity when drilling Ti-6A1-4V and Ti-5A1-4V-Mo/Fe.
by: Abd. Rahim, Erween, et al.
Published: (2006)

Performance evaluation of uncoated and coated carbide tools when drilling titanium alloy
by: Abd. Rahim, Erween
Published: (2005)

Performance evaluation of uncoated and coated carbide tools when drilling titanium alloy
by: Abd. Rahim, Erween
Published: (2005)

Tool failure modes and wear mechanism of coated carbide tools when drilling Ti-6AI-4V
by: Rahim, E. A., et al.
Published: (2007)

Effect of high-speed parameters on uncoated carbide tool in finish turning titanium Ti-6Al-4V ELI
by: Sulaiman, M.A., et al.
Published: (2014)

Effect of drill geometry of uncoated tool when drilling titanium alloy, Ti-6Al-4V
by: Rashiddy Wong, Freddawati
Published: (2008)

Comparative study between wear of uncoated and TiAlN-coated carbide tools in milling of Ti6Al4V
by: Uddin, M., et al.
Published: (2017)

Three dimensional finite element modeling, when drilling of Ti-6Al-4V
by: Abd Rahim, Erween, et al.
Published: (2017)

Comparison of uncoated and coated carbide inserts in end milling of Ti–6Al–4V in terms of surface roughness
by: Hossain, Mohammad Ishtiaq, et al.
Published: (2008)

Assessment of performance of uncoated and coated carbide inserts in end milling of Ti-6Al-4V through modelling
by: Hossain, Ishtiaq, et al.
Published: (2011)

Tool life prediction by response surface methodology for end milling titanium alloy ti–6al–4v using uncoated carbide inserts
by: Ginta, Turnad Lenggo, et al.
Published: (2007)

Development of surface roughness models in end milling titanium alloy Ti-6Al-4V using uncoated tungsten carbide inserts
by: Ginta, Turnad Lenggo, et al.
Published: (2009)

The performance of uncoated tungsten carbide insert in end milling titanium alloy Ti-6Al 4V through work piece preheating
by: Ginta, Turnad Lenggo, et al.
Published: (2009)

Effect of high speed end milling of Co-28Cr-6Mo cobalt chromium molybdenum alloy using uncoated and coated carbide tools
by: Zaman, H., et al.
Published: (2017)

Influence of preheating on chatter and machinability of titanium alloy - Ti6A14V
by: Kamdani, Kamaruddin
Published: (2005)

Influence of preheating on chatter and machinability of titanium alloy-Ti6A14V
by: Kamdani, Kamaruddin
Published: (2005)

Cutting performance and wear characteristics of PVD coated and uncoated carbide tools in face milling Inconel 718 aerospace alloy
by: Jawaid, A., et al.
Published: (2001)

Wear Mechanism of Coated and Uncoated Carbide Cutting Tool in Machining Process
by: J. A., Ghani, et al.
Published: (2016)

Flank Wear Characterization in Aluminum Alloy (6061 T6) with Nanofluid MQL Environment using Uncoated Carbide Tool
by: Najiha, M. S., et al.
Published: (2015)

Tool life prediction by response surface methodology in end milling Titanium alloy Ti-6Al-4V using uncoated wc-co inserts
by: Ginta, Turnad Lenggo, et al.
Published: (2009)

Tool life prediction by response surface methodology in end milling titanium alloy Ti-6Al-4V using uncoated WC-Co inserts
by: Turnad, L. Ginta, et al.
Published: (2009)

Performance of coated and uncoated carbide tools while dry machining aluminium alloy
by: Amin Abidin, Buran
Published: (2010)

Study on tool wear and tool life during milling JFRP using uncoated carbide cutting tool
by: Rashid, Mohammed Abdur N., et al.
Published: (2018)

Tool life prediction by response surface methodology in end milling titanium alloy Ti-6A1-4V using uncoated WC-Co inserts
by: Turnad L., Ginta, et al.
Published: (2009)

Modeling for surface roughness in end-milling of Titanium alloy Ti-6Al-4V using uncoated WC-Co inserts
by: Amin, A. K. M. Nurul, et al.
Published: (2011)

Experimental analysis and optimization of coated and uncoated carbide tool in drilling aisi 316 L austenite stainless steel using minimum quantity lubrication technique
by: Mukhtar, Malik
Published: (2018)

Finite element simulation of machining AISI 1045 steel using uncoated carbide tool
by: Mohmd Arifin, Nabila Afif
Published: (2012)

Finite element simulation of machining AISI 1045 steel using uncoated carbide tool
by: Mohmd Arifin, Nabila Afif
Published: (2012)

Flank Wear Characterization in Aluminum Alloy (6061 T6) With Nanofluid Minimum Quantity Lubrication Environment Using an Uncoated Carbide Tool
by: Najiha, M. S., et al.
Published: (2015)

Effect of high speed dry end milling on surface roughness and cutting forces of Ti-6Al-4V ELI
by: Sharif, S., et al.
Published: (2014)

Optimization of surface roughness in micro-high speed end milling of soda lime glass using uncoated tungsten carbide tool with compressed air blowing
by: Amin, A. K. M. Nurul, et al.
Published: (2014)

Cutting force and surface roughness characterization in cryogenic high-speed end milling of Ti-6Al-4V ELI
by: Safari, H., et al.
Published: (2014)

Modeling for surface roughness in end-milling of titanium alloy Ti-6AI-4V using uncoated WC-Co and PCD Inserts
by: Ginta, Turnad Lenggo, et al.
Published: (2007)

Laser cladding of Ti-6Al-4V with carbide and boride reinforcements using wire and powder feedstock
by: Farayibi, Peter Kayode
Published: (2014)

Effect of dry and MQL cutting condition on coated carbide cutting tool during the end milling of Ti-6Al-4V titanium alloy
by: Aiman Nazrin, Noor Ismail, et al.
Published: (2024)

Progressive tool wear in machining biomedical alloy using uncoated and titanium diboride coated tungsten carbide tools
by: Mohd Hafizu, Zakaria
Published: (2019)

Effect of cutting parameters on tool wear when trochoidal pocket milling Ti6Al4V
by: Sharif, S., et al.
Published: (2019)

Effect of cutting parameters on tool wear when trochoidal pocket milling Ti6Al4V
by: S., Sharif, et al.
Published: (2019)