GGBFS as potential filler in polyester grout : flexural strength and toughness

QR Code

GGBFS as potential filler in polyester grout : flexural strength and toughness

The effectiveness of ground granulated blast furnace slag (GGBFS) as filler in polyester resin grout was investigated. The mix proportions of polymer grout was properly designed and manufactured. The binder, hardener and fillers used in this study were isophatalic unsaturated polyester resin (IUPR),...

Full description

Bibliographic Details
Main Authors:	Ling, Tung Chai, Siong, Kang Lim, Hussin, Mohd. Warid, Zakaria, Fadhadli
Format:	Article
Published:	Elsevier 2008
Subjects:	TH Building construction TA Engineering (General). Civil engineering (General)
Online Access:	http://eprints.utm.my/7821/

Similar Items

Effect of GGBFS as filler in polyester grout on strength development and flowability
by: Lim, S. K., et al.
Published: (2006)

Effect of filler on strength development of epoxy grout
by: Lim, Siong Kang, et al.
Published: (2008)

Engineering properties of high volume slag cement grout in tropical climate
by: Hussin, Mohd. Warid, et al.
Published: (2007)

Microstructural behavior of aerated concrete containing high volume of GGBFS
by: Arreshvhina, N., et al.
Published: (2006)

Tensile strength of polyesteer with different composition of aluminium filler
by: Chong, Sia Onn
Published: (2008)

Strength Development of Epoxy Grouts for Pipeline Rehabilitation
by: Lim, Kar Sing, et al.
Published: (2017)

Effect of slag content to cement grout on the compressive strength development in tropical weather environment
by: Lim, S. K., et al.
Published: (2006)

Shear strength characteristics of over-consolidated clay treated with ggbfs
by: Keramatikerman, M., et al.
Published: (2018)

Fracture toughness and impact strength of hollow epoxy particles-toughened polyester composite
by: Low, L.F., et al.
Published: (2013)

Cumulative Effect of Crumb Rubber and Steel Fiber on the Flexural Toughness of Concrete
by: Abu Bakar, Badorul Hisham, et al.
Published: (2017)

Effects of various environments on tensile properties, flexural properties and fracture toughness of kenaf fibre reinforced unsaturated polyester (KFRP) composites / Farizah Adliza Ghazali
by: Ghazali, Farizah Adliza
Published: (2010)

Impact strength, fracture toughness and hardness improvement of PMMA denture base through addition of nitrile rubber/ceramic fillers
by: Alhareb, Ahmed Omran, et al.
Published: (2017)

Fracture toughness of kenaf mat reinforced polyester composite
by: Radif, Zainab Shakir, et al.
Published: (2011)

Fracture toughness of kenaf mat reinforced polyester matrix
by: Radif, Zainab Shaker, et al.
Published: (2009)

The flexural strength of polystyrene sandwich beam
by: Nur Hazwani, Alias
Published: (2013)

Effect of Mixing Constituent toward Engineering Properties of POFA Cement-Based Aerated Concrete
by: Khairunisa, Muthusamy, et al.
Published: (2010)

Performances of Palm Oil Fuel Ash Cement Based Aerated Concrete in Acidic and Sulphate Environments
by: Mohd Warid, Hussin, et al.
Published: (2008)

Performance of Palm Oil Fuel Ash Cement Based Aerated Concrete Subjected to Different Curing Regime Towards Carbonation
by: Khairunisa, Muthusamy, et al.
Published: (2006)

The effect of hollow section to the flexural strength of the beam
by: Muhamad Afiq , Azman
Published: (2013)

Stabilisation of clay with fly-ash geopolymer incorporating GGBFS
by: Abdullah, H., et al.
Published: (2017)

Effect of GGBFS and lime binders on the engineering properties of clay
by: Keramatikerman, Mahdi, et al.
Published: (2016)

Flexural properties of wheat straw reinforced polyester composites
by: Dong, Chensong, et al.
Published: (2011)

Effect of GGBFS on setting, workability and early strength properties of fly ash geopolymer concrete cured in ambient condition
by: Nath, Pradip, et al.
Published: (2014)

The effect of wet coconut fibre on concrete properties (compressive strength and flexural strength)
by: Nur Ain , Hasan
Published: (2013)

Effect of pine fiber on concrete compressive and flexural strength
by: Muhammad Syafiq , Mansoruddin
Published: (2013)

Flexural strength interlocking block beam laterite soil
by: Mohd Safuan, Ismail
Published: (2013)

Effect of different filler on the strength of interlocking block beam
by: Salman, Shaari
Published: (2014)

Effective dispersion of carbonnanotube in epoxy grout for structural rehabilitation
by: Kam, Seng Hai
Published: (2018)

Compressive and flexural strengths of concrete with iron ore as sand replacement
by: Siti Fairuszila, Izhar
Published: (2012)

Effect on flexural strength of joist due to external side reinforcement
by: Nasruddin , Md Jariman
Published: (2013)

Flexural properties of macadamia nutshell particle reinforced polyester composites
by: Dong, Chensong, et al.
Published: (2012)

Effect of loading rates on the fracture toughness of fiber metal laminate kenaf short fiber/epoxy/polyester / Eldridge George
by: George, Eldridge
Published: (2009)

An Investigation on Effect of Oil Palm Shell Ash on Flexural Strength and Compressive Strength of Cement Mortar
by: Abdoullah, Namdar, et al.
Published: (2014)

The effect of coconut fibre on concrete properties (workability and flexural strength)
by: Azwan Bukhari, Asmil
Published: (2012)

Effective dispersion of graphene nanoplatelets in epoxy grout for structural rehabilitation
by: Ain Shahira, Kasmaon
Published: (2018)

Performance of Grouted Splice Sleeve Connector Under Tensile Load
by: Aizat, Alias, et al.
Published: (2013)

Effective Dispersion of Carbon Nanotube in Epoxy Grout for Structural Rehabilitation
by: Lim, Kar Sing, et al.
Published: (2018)

Effective dispersion of graphene nanoplatelets in epoxy grout for pipeline rehabilitation
by: Lim, Kar Sing, et al.
Published: (2018)

Tensile behaviour of MWCNTs-modified epoxy grout for pipeline repair
by: Arifin, Hanis Hazirah, et al.
Published: (2018)

Flexural strength of concrete beam by using wood block as aggregate replacement
by: Nur Affini, Azmi
Published: (2019)