Wear behavior of PVD and CVD coated carbide tools when face milling Inconel 718

QR Code

Wear behavior of PVD and CVD coated carbide tools when face milling Inconel 718

The wear behavior of two types of coated cemented carbide tools has been studied when face milling a nickel-based superalloy Inconel 718. PVD-TiN and CVD-TiCN+Al2O3 tools were used. It was found that the coatings were detached after only five seconds of cutting. An attrition type wear mechanism asso...

Full description

Bibliographic Details
Main Authors:	Jawaid, A., Koksal, S., Sharif, S.
Format:	Article
Published:	Tribology Transaction 2000
Subjects:	TJ Mechanical engineering and machinery
Online Access:	http://eprints.utm.my/6838/

Similar Items

Cutting performance and wear characteristics of PVD coated and uncoated carbide tools in face milling Inconel 718 aerospace alloy
by: Jawaid, A., et al.
Published: (2001)

Evaluation of wear mechanisms of coated carbide tools when face milling titanium alloy
by: Jawaid, A., et al.
Published: (2000)

Tool life of TiAlN PVD coated carbide tool in high-speed end milling of untreated inconel 718 under minimum quantity lubrication condition
by: Kasim, M.S., et al.
Published: (2013)

Wear mechanism in end milling of Inconel 718
by: Amin, A. K. M. Nurul, et al.
Published: (2011)

Performance of Silicon carbide whisker reinforced ceramic inserts on Inconel 718 in end milling process
by: Moola, Mohan, et al.
Published: (2016)

The study of coated carbide ball end milling tools on inconel 718 using numerical simulation analysis to attain cutting force and temperature predictive models at the cutting zone
by: Chien, S., et al.
Published: (2017)

The influence of coolant on tool deterioration of uncoated carbide tools in endmilling hardened inconel 718plus nickel based superalloy
by: Nurul Hidayah, Razak
Published: (2020)

Performance of Variable Helix and Pitch Cutting Tools on Chatter Vibration in End Milling of Inconel 718
by: Hou, Hoe Chen
Published: (2018)

Condition monitoring of tool performance using a machine learning-based on-machine vision system during face milling of Inconel 718
by: Banda, Tiyamike
Published: (2024)

Effect of machining parameters on surface finish of Inconel 718 in end milling
by: Sarkar, B., et al.
Published: (2017)

Mathematical model of chip serration frequency in end milling of Inconel 718
by: Patwari, Muhammed Anayet Ullah, et al.
Published: (2008)

The effect of coating architecture and defects on the corrosion behaviour of a PVD multilayer Inconel 625/Cr coating
by: Daure, J.L., et al.
Published: (2017)

Numerical analysis of laser preheating for laser assisted micro milling of Inconel 718
by: Abdul Rahim, Erween, et al.
Published: (2014)

Enhancement of machinability of Inconel 718 in end milling through online induction heating of workpiece
by: Amin, A. K. M. Nurul, et al.
Published: (2012)

Tool failure modes and wear mechanism of coated carbide tools when drilling Ti-6AI-4V
by: Rahim, E. A., et al.
Published: (2007)

Investigation of machining performance of the PVD coated tungsten carbide by sandblasting pre-treatment
by: Hariz Sufiyan, Mohamed Sunari
Published: (2012)

Life assessment of welded INCONEL 718 at high temperature
by: Tanner, David W. J.
Published: (2009)

Electrolyte jet machining for surface texturing of Inconel 718
by: Mitchell-Smith, Jonathon, et al.
Published: (2014)

Process capability of high speed micro end-milling of Inconel 718 with minimum quantity lubrication
by: Abd. Rahman, Mohamed, et al.
Published: (2017)

Artificial neural network algorithm for predicting the surface roughness in end milling of Inconel 718 alloy
by: Hossain, Mohammad Ishtiyaq, et al.
Published: (2011)

End-mill carbide tool wear in machining metallic biomaterial
by: A. I., Yahaya, et al.
Published: (2023)

Prediction of surface roughness in high speed machining of Inconel 718
by: Suhaily, Mokhtar, et al.
Published: (2011)

Investigation of the machinability of Inconel 718 in room temperature and preheated conditions
by: Amin, A. K. M. Nurul, et al.
Published: (2011)

Development of an artificial neural network algorithm for predicting the surface roughness in end milling of inconel 718 alloy
by: Hossain, Mohammad Ishtiyaq, et al.
Published: (2008)

Development of an artificial neural network algorithm for predicting the cutting force in end milling of Inconel 718 alloy
by: Hossain, Ishtiaq, et al.
Published: (2011)

Enhancement of surface integrity in cryogenic high speed ball nose end milling process of inconel 718
by: Musfirah, Abdul Hadi, et al.
Published: (2020)

Modelling Of Tool Life When Milling Nickel Base Alloys With Two Different Coated Carbide Insert.
by: K., Kadirgama
Published: (2008)

Performance evaluation of coated carbide and coated cermet tools when turning hardened tool steel
by: Mohd. Yusof, Noordin
Published: (2003)

An analysis of surface integrity when drilling inconel 718 using palm oil and synthetic ester under, MQL condition
by: A. Rahim, Erween, et al.
Published: (2011)

Wear Mechanism of Coated and Uncoated Carbide Cutting Tool in Machining Process
by: J. A., Ghani, et al.
Published: (2016)

Study on wear mechanism of solid carbide cutting tool in milling CFRP
by: Muhamad Khairussaleh, Nor Khairusshima, et al.
Published: (2016)

Effects on vibration and surface roughness in high speed micro end-milling of Inconel 718 with minimum quantity lubrication
by: Abd. Rahman, Mohamed, et al.
Published: (2017)

Analysis of Machinability of Inconel 718 in High Speed End Milling with Ceramic Inserts Under Room Temperature Conditions
by: Nurul Amin, A. K. M, et al.
Published: (2012)

Comparison of machinability of ceramic insert in room temperature and cryogenic cooling conditions during end milling inconel 718
by: Amin, A. K. M. Nurul, et al.
Published: (2011)

Enhancement of machinability of nickel based alloy - inconel 718 by induction preheating in end milling using ceramic inserts
by: Mokhtar, Suhaily, et al.
Published: (2010)

Surface integrity of Inconel 718 under cryogenic and dry cutting conditions
by: Muammar Faiq Azhar,, et al.
Published: (2024)

Creep behaviour of inconel 718 processed by laser powder bed fusion
by: Xu, Zhengkai, et al.
Published: (2018)

Solvent debinding of Inconel 718 fabricated via Metal Injection Molding
by: Suleiman @ Ahmad, Muhammad Jabir, et al.
Published: (2016)

Aspects of Wear Mechanisms of Carbide Tools when Machine Hastelloy C-22HS
by: K., Kadirgama, et al.
Published: (2010)

Performance evaluation of coated carbide cutting tools when turning hardened tool steel
by: Tang, Yu Cai
Published: (2006)