An evaluation of the elastic properties of an adhesive layer using the tensile-butt joint test: Procedures and error estimates
Simple analytical formulae have been reported in literature to extract basic elastic material properties of adhesives subjected to tensile load. This work investigates the errors connected with the evaluation of the tensile butt-joint test of adhesive technology based on these analytical formulae. T...
| Main Authors: | Ochsner, Andreas, Gracio, Jose |
|---|---|
| Format: | Article |
| Published: |
Elsevier
2007
|
| Subjects: | |
| Online Access: | http://eprints.utm.my/5521/ |
Similar Items
A new evaluation procedure for the butt-joint test of adhesive technology: determination of the complete set of linear elastic constants
by: Ochsner, Andreas, et al.
Published: (2007)
by: Ochsner, Andreas, et al.
Published: (2007)
Necking in the tensile test. Correction formulae and related error estimation
by: Gromada, M., et al.
Published: (2007)
by: Gromada, M., et al.
Published: (2007)
Numerical analysis to characterize triaxiality value of adhesive joint due to particular load configuration. Part 1: butt joint
by: Helmi, Irfan
Published: (2011)
by: Helmi, Irfan
Published: (2011)
A new finite element formulation for thin non-homogenous heat-conducting adhesive layers
by: Ochsner, Andreas, et al.
Published: (2008)
by: Ochsner, Andreas, et al.
Published: (2008)
Simulation analysis of ultrasonic testing in steel-based butt weld joint
by: Mukhtar, Muhammad Faiz Hakimi, et al.
Published: (2021)
by: Mukhtar, Muhammad Faiz Hakimi, et al.
Published: (2021)
On the thermal conductivity of adhesively bonded and sintered Hollow Sphere Structures (HSS)
by: Fiedler, Thomas, et al.
Published: (2007)
by: Fiedler, Thomas, et al.
Published: (2007)
Thermal stress analysis of butt welded joint / Karthikeyan Balasubramaniam
by: Karthikeyan, Balasubramaniam
Published: (2013)
by: Karthikeyan, Balasubramaniam
Published: (2013)
Effect of butt joint on mechanical properties of welded low carbon steel
by: Wardoyo, T., et al.
Published: (2014)
by: Wardoyo, T., et al.
Published: (2014)
The Microstructure of Aluminum A5083 Butt Joint by Friction Stir Welding
by: M., Ishak, et al.
Published: (2015)
by: M., Ishak, et al.
Published: (2015)
Analysis of PSSDB wall panel with vertical butt joints in the dryboards / Hersaiful Herwan Baharuddin
by: Baharuddin, Hersaiful Herwan
Published: (2004)
by: Baharuddin, Hersaiful Herwan
Published: (2004)
The effects of welding parameters on butt joints using robotic gas metal arc welding
by: Abdul Aziz, Nuraini, et al.
Published: (2014)
by: Abdul Aziz, Nuraini, et al.
Published: (2014)
Analysis on magnetic flux density and core loss for hexagonal and butt-lap core joint transformers
by: Mohd Isa, Maryam, et al.
Published: (2016)
by: Mohd Isa, Maryam, et al.
Published: (2016)
Markovian Transition Probabilities: Estimation And Test Procedures
by: Sirdari, Mahboobeh Zangeneh
Published: (2013)
by: Sirdari, Mahboobeh Zangeneh
Published: (2013)
The effect of butt joint on the structural behaviour of PSSDB wall panel / Siti Hawa Hamzah ... [et al.]
by: Hamzah, Siti Hawa, et al.
Published: (2007)
by: Hamzah, Siti Hawa, et al.
Published: (2007)
The effect of butt jointed dry board in PSSDB wall panel with window opening / Mohd Ghazali Hj Hamzah
by: Hj Hamzah, Mohd Ghazali
Published: (2004)
by: Hj Hamzah, Mohd Ghazali
Published: (2004)
Analysis of PSSDB wall panel with horizontal butt joints in the dryboards / Syed Tajul Malik Syed Tajul Arif
by: Syed Tajul Arif, Syed Tajul Malik
Published: (2004)
by: Syed Tajul Arif, Syed Tajul Malik
Published: (2004)
Design and fabrication of jig for butt welding
by: Mohd Rosyazwan Hanif, Ishak
Published: (2012)
by: Mohd Rosyazwan Hanif, Ishak
Published: (2012)
Symmetry characterization and measurement errors of elasticity tensors
by: Bona, Andrej
Published: (2009)
by: Bona, Andrej
Published: (2009)
The Effect of Welding Process Parameter on Temperature and Residual Stress in Butt-Joint Weld of Robotic Gas Metal Arc Welding.
by: Abdul Aziz, Nuraini, et al.
Published: (2013)
by: Abdul Aziz, Nuraini, et al.
Published: (2013)
Estimation of corrugated cardboard strength with a new tensile or shear test method
by: Norfariza, Ab. Wahab
Published: (2012)
by: Norfariza, Ab. Wahab
Published: (2012)
Error Bounds for Joint Detection and Estimation of a Single Object With Random Finite Set Observation
by: Rezaeian, M., et al.
Published: (2010)
by: Rezaeian, M., et al.
Published: (2010)
Investigation the effect of expanded graphite modification on tensile properties and adhesive of epoxy composite
by: Che Berhanuddin, Nurul Idani
Published: (2018)
by: Che Berhanuddin, Nurul Idani
Published: (2018)
The environmental degradation of adhesive joint / Muhazli Muhammad and Rosli Yusof
by: Muhammad, Muhazli, et al.
Published: (1999)
by: Muhammad, Muhazli, et al.
Published: (1999)
Welding parameter optimization using Taguchi method and Grey Relational Analysis for Gas Metal Arc Welding A1008 butt-joint
by: Mattar, Zainal Abidin Shah
Published: (2013)
by: Mattar, Zainal Abidin Shah
Published: (2013)
Recycling cigarette butts in
lightweight fired clay bricks
by: A. Kadir, Aeslina, et al.
Published: (2011)
by: A. Kadir, Aeslina, et al.
Published: (2011)
Saturation effects on the joint elastic-dielectric properties of carbonates
by: Han, T., et al.
Published: (2016)
by: Han, T., et al.
Published: (2016)
Simple Pole Placement Controller for Elastic Joint Manipulator
by: Mohd Helmi, Suid, et al.
Published: (2012)
by: Mohd Helmi, Suid, et al.
Published: (2012)
Characterisation of the interface adhesion of elastic-plastic thin film/rigid substrate systems using a pressurized blister test numerical model
by: Jiang, L., et al.
Published: (2010)
by: Jiang, L., et al.
Published: (2010)
Investigation on the shear joints failure with tensile loading for aluminum pins
by: Mohd Firdaus, Mohd Zaid
Published: (2009)
by: Mohd Firdaus, Mohd Zaid
Published: (2009)
Tensile Strength and Failure Characteristics of Common Roof Truss Joints
by: Abdul Rahman, Mahadzir
Published: (2002)
by: Abdul Rahman, Mahadzir
Published: (2002)
PSSDB load bearing wall with window opening - effect of butt joint in dryboard / Prof Madya Ir. Siti Hawa Hamzah …[et al.]
by: Hamzah, Siti Hawa (Prof. Madya Ir.), et al.
Published: (2003)
by: Hamzah, Siti Hawa (Prof. Madya Ir.), et al.
Published: (2003)
Experimental investigation on frequency shifting of imperfect adhesively bonded pipe joints
by: Haiyam, F. N., et al.
Published: (2018)
by: Haiyam, F. N., et al.
Published: (2018)
Thermal conductivity of fired clay bricks incorporated with cigarette butts
by: Sarani, Noor Amira, et al.
Published: (2013)
by: Sarani, Noor Amira, et al.
Published: (2013)
Structural Analysis Of Stretchable Electronics Joint Under Tensile And Vibration Loading
by: Mustaffa, Nadirah
Published: (2017)
by: Mustaffa, Nadirah
Published: (2017)
Mechanisms and Performance of Composite Joints Through Adhesive and Interlocking Means—A Review
by: Davaasambuu, Khishigdorj, et al.
Published: (2025)
by: Davaasambuu, Khishigdorj, et al.
Published: (2025)
Finite element analysis (FEA) modeling on adhesive joint for composite fuselage model
by: Mustapha, Faizal, et al.
Published: (2011)
by: Mustapha, Faizal, et al.
Published: (2011)
Effect of graphene nanoreinforcement on moisture absorption and mechanical properties of epoxy adhesive joint
by: Nurziana, Kong
Published: (2023)
by: Nurziana, Kong
Published: (2023)
Performance of Asphalt Mixture Incorporated Encapsulated Cigarette Butts as Bitumen Modifier
by: Ameen, H. AL-A. Nader, et al.
Published: (2022)
by: Ameen, H. AL-A. Nader, et al.
Published: (2022)
Discarded Cigarette Butts Attract Females and Kill the Progeny
of Aedes albopictus
by: Dieng, Hamady, et al.
Published: (2011)
by: Dieng, Hamady, et al.
Published: (2011)
Composite PD and Fuzzy Logic Approach for Vibration of Elastic Joint Manipulator
by: Mohd Ashraf, Ahmad, et al.
Published: (2010)
by: Mohd Ashraf, Ahmad, et al.
Published: (2010)
Similar Items
-
A new evaluation procedure for the butt-joint test of adhesive technology: determination of the complete set of linear elastic constants
by: Ochsner, Andreas, et al.
Published: (2007) -
Necking in the tensile test. Correction formulae and related error estimation
by: Gromada, M., et al.
Published: (2007) -
Numerical analysis to characterize triaxiality value of adhesive joint due to particular load configuration. Part 1: butt joint
by: Helmi, Irfan
Published: (2011) -
A new finite element formulation for thin non-homogenous heat-conducting adhesive layers
by: Ochsner, Andreas, et al.
Published: (2008) -
Simulation analysis of ultrasonic testing in steel-based butt weld joint
by: Mukhtar, Muhammad Faiz Hakimi, et al.
Published: (2021)