Ester-based drilling fluids toward improved filtration properties performance

QR Code

Ester-based drilling fluids toward improved filtration properties performance

Synthetic based drilling fluids have been developed to meet difficult drilling targets with reduced environmental impact. Vegetables oils have been extensively studied as an alternative to common oil-based drilling fluids. However most of the vegetables oils are chemically reactive and can undergo a...

Full description

Bibliographic Details
Main Authors:	Kamis, Azmi, Ismail, Abdul Razak, Ismail, Issham, Khor, Siak Foo
Format:	Article
Language:	English
Published:	Faculty of Engineering, UKM 2000
Subjects:	TP Chemical technology
Online Access:	http://eprints.utm.my/4086/ http://eprints.utm.my/4086/1/SKMBT_60007072410421.pdf

Similar Items

Feasibility study of palm oil esters as based fluid in drilling operation
by: Ismail, Abdul Razak, et al.
Published: (2001)

Data on experimental investigation of Methyl Ester Sulphonate and nanopolystyrene for rheology improvement and filtration loss control of water-based drilling fluid
by: Elochukwu, H., et al.
Published: (2018)

Improving rheological and filtration properties of water based drilling fluid using palm derived methyl ester sulphonate surfactant and waste polystyrene nano-particle
by: Sia, Luke Kennedy Si Lung
Published: (2018)

Formation damage using palm oil ester based drilling fluid
by: Md., A. A., et al.
Published: (2008)

Development of ester-based drilling fluids for wellbore enhancement
by: Ismail Jassim, Lina
Published: (2015)

An experimental study to improve filtration properties of water‑based drilling fluids using rambutan as green additive
by: Ikram, Rabia, et al.
Published: (2024)

Improvement in the transport capacity of drilled particles of aqueous-based drilling fluid using surface-enriched hydroxyapatite nanoparticles
by: Oseh, Jeffrey O., et al.
Published: (2024)

Effects of lime on ester based drilling fluid
by: Razali, Siti Zulaika, et al.
Published: (2017)

Effect of a novel clay/silica nanocomposite on water-based drilling fluids: Improvements in rheological and filtration properties
by: Cheraghian, G., et al.
Published: (2018)

Managing drilling mud weight using ilmenite
by: Ismail, Issham, et al.
Published: (1999)

Development of graphene-enhanced ester-based drilling fluid
by: Razali, Siti Zulaika
Published: (2019)

Synthesis and optimization of 2-ethylhexyl ester as base oil for drilling fluid formulation
by: Ismail Jassim, Lina, et al.
Published: (2016)

Preliminary Study of Jatropha Curcas Oil as Ester-Based Drilling Fluids
by: Sonny Irawan, Sonny, et al.
Published: (2010)

Polyol esters as thinner and biolubricant additive for synthetic-based drilling fluid
by: Kania, Dina
Published: (2019)

Polymer nanocomposites application in drilling fluids: A review
by: Oseh, Jeffrey Onuoma, et al.
Published: (2023)

CFD Modeling of Crossflow Membrane Filtration- Integration of Filtration Model and Fluid Transport Model
by: Khor, E., et al.
Published: (2009)

CornCob And Sugar Cane Waste as a Viscosivier in Drilling Fluid
by: Sonny Irawan, Sonny, et al.
Published: (2009)

Nonionic polyol esters as thinner and lubricity enhancer for synthetic-based drilling fluids
by: Kania, Dina, et al.
Published: (2018)

Lubricity performance of non-ionic surfactants in high-solid drilling fluids: a perspective from quantum chemical calculations and filtration properties
by: Kania, Dina, et al.
Published: (2021)

Improvement in fluid loss control and viscosity of water-based drilling mud under high temperature and sodium chloride salt conditions using nanohydroxyapatite
by: Oseh, Jeffrey O., et al.
Published: (2024)

Rheological and filtration control performance of water-based drilling muds at different temperatures and salt contaminants using surfactant-assisted novel nanohydroxyapatite
by: Oseh, Jeffrey Onuoma, et al.
Published: (2023)

Effects of morphology and graphitization of carbon nanomaterials on the rheology, emulsion stability, and filtration control ability of drilling fluids
by: Razali, Siti Zulaika, et al.
Published: (2022)

Palm oil diesel as a base fluid in formulating oil based drilling fluid
by: Md. Yassin, Abu Azam, et al.
Published: (1991)

Effect of nanoparticles in drilling fluids on the transportation of different cutting sizes in a rotating horizontal pipe
by: Oseh, Jeffrey O., et al.
Published: (2024)

Sodium dodecyl sulphate-treated nanohydroxyapatite as an efficient shale stabilizer for water-based drilling fluids
by: Oseh, Jeffrey O., et al.
Published: (2024)

Performance evaluation of polyol esters from palm oil as a lubricant for bentonite suspension drilling fluid
by: Kania, Dina, et al.
Published: (2017)

Managing the environmental friendly drilling fluids in petroleum industries
by: Ismail, Abdul Razak
Published: (2001)

The importance of infill drilling in a mature offshore field
by: Ismail, Issham
Published: (1991)

Drilling fluids based on a derivative of Malaysian palm oil
by: Samsuri, Ariffin, et al.
Published: (1993)

Transesterification reaction for synthesis of palm-based ethylhexyl ester and formulation as base oil for synthetic drilling fluid
by: Abdul Habib, Nor Saiful Hafiz, et al.
Published: (2014)

A study of formation damage at different drilling environments
by: Teow, Ket Seang, et al.
Published: (2000)

Toxicity study on marine organisms due to drilling fluids
by: Ismail, Abdul Razak, et al.
Published: (1997)

Effects of microbubble-bodyfeeding on filtration properties of clay suspension
by: Yoshimoto , Akihiko, et al.
Published: (2014)

Application of silica (SiO2) nanofluid and Gemini surfactants to improve the viscous behavior and surface tension of water-based drilling fluids
by: Abang, G. N. -O., et al.
Published: (2021)

Evaluation of formation damage caused by drilling fluid in deviated wellbore
by: Md Yassin, Abu Azam, et al.
Published: (1993)

Study on the Rheology of Drilling Fluid and Its Impact on Drilling Operation
by: Wang, Yiwen
Published: (2019)

The performance of locally produced xanthan gum in drilling mud
by: Ismail, I., et al.
Published: (2008)

Petroleum fluid components that naturally formed
by: A. Manan, Muhammad, et al.
Published: (1997)

Improvements of oil-in-water analysis for produced water using membrane filtration
by: Khor, Ee Huey
Published: (2011)

Rejection of micropollutants by membrane filtration
by: Ozaki, Hiroaki
Published: (2004)