Physical Properties of New Formulation of Hybrid Nanofluid-based Minimum Quantity Lubrication (MQL) from Modified Jatropha Oil as Metalworking Fluid

QR Code

Physical Properties of New Formulation of Hybrid Nanofluid-based Minimum Quantity Lubrication (MQL) from Modified Jatropha Oil as Metalworking Fluid

As a metalworking fluid, vegetable-based crude jatropha oil (CJO) was used in place of petroleum-based oil. The use of petroleum-oil-based metalworking fluids poses significant environmental and health concerns. Furthermore, it has a large amount of free fatty acid (FFA), promoting physical damage....

Full description

Bibliographic Details
Main Authors:	Sabri, Ainaa Mardhiah, Talib, Norfazillah, Mohd Saad, Nur Syazwani Filzah, Abdul Sani, Amiril Sahab, Kunar, Sandip, Ahmad, Said, Abdullah, Haslina, Lee Woon Kiow, Lee Woon Kiow, Salleh, Aslinda
Format:	Article
Language:	English
Published:	semarak ilmu 2023
Subjects:	T Technology (General)
Online Access:	http://eprints.uthm.edu.my/8913/ http://eprints.uthm.edu.my/8913/1/J15845_6890dd4d73b1afe216898927326b20bf.pdf

Similar Items

Physical Properties of New Formulation of Hybrid Nanofluid-based Minimum Quantity Lubrication (MQL) from Modified Jatropha Oil as Metalworking Fluid
by: Sabri, Ainaa Mardhiah, et al.
Published: (2023)

Physical Properties of New Formulation of Hybrid Nanofluid-based Minimum Quantity Lubrication (MQL) from Modified Jatropha Oil as Metalworking Fluid
by: Sabri, Ainaa Mardhiah, et al.
Published: (2023)

Physical Properties of New Formulation of Hybrid Nanofluid-based Minimum Quantity Lubrication (MQL) from Modified Jatropha Oil as Metalworking Fluid
by: Sabri, Ainaa Mardhiah, et al.
Published: (2023)

Physical properties of new formulation of hybrid nanofluid-based Minimum Quantity Lubrication (MQL) from modified jatropha oil as metalworking fluid
by: Ainaa Mardhiah, Sabri, et al.
Published: (2023)

Physical Properties of New Formulation of Hybrid Nanofluid-based Minimum Quantity Lubrication (MQL) from Modified Jatropha Oil as Metalworking Fluid
by: Sabri, Ainaa Mardhiah, et al.
Published: (2023)

Modified Jatropha nano-lubricant as metalworking fluid for machining process
by: Talib, Norfazillah, et al.
Published: (2019)

Tribological enhancement of modified jatropha oil by activated carbon nanoparticle for metalworking fluid application
by: Talib, Norfazillah, et al.
Published: (2022)

Tribological evaluation of solid lubricant enriched in modified Jatropha-Based Oil as Minimum Quantity Lubrication (MQL) oil for composite material
by: Talib, N., et al.
Published: (2021)

Evaluation of mist flow characteristic and performance in Minimum Quantity Lubrication (MQL) machining
by: Abd Rahim, Erween, et al.
Published: (2018)

Orthogonal cutting performance of vegetable-based lubricants via minimum quantity lubrication technique on AISI 316L
by: Amiril Sahab, Abdul Sani, et al.
Published: (2024)

Noble approach to control vibration using minimum quantity lubrication (MQL) in micro milling
by: Yeakub Ali, Mohammad, et al.
Published: (2019)

A review identifying the effectiveness of minimum quantity lubrication (MQL) during conventional machining
by: Boswell, Brian, et al.
Published: (2017)

Minimum Quantity Lubrication (MQL) using Ranque - Hilsch Vortex Tube (RHVT) for Sustainable Machining
by: H. A., Salaam, et al.
Published: (2012)

Minimum Quantity Lubrication (MQL) and its effect on tool wear during miniature drilling: an experimental study
by: Mohamad, Norsalawani, et al.
Published: (2016)

Investigation of Lubricant Oil Film Thickness on Workpiece under Minimum Quantity Lubrication Milling Process
by: Nurrina, Rosli, et al.
Published: (2023)

Study on the effects of nozzle distance to surface roughness of workpiece under minimum quantity lubricant (MQL) milling process
by: Firdaus Shazriq, Mohd Fadzil, et al.
Published: (2018)

Enhancing the physical and tribological characteristics of modified jatropha oil via the incorporation of hybrid nanoparticle additives
by: Ainaa, M. Sabri, et al.
Published: (2024)

Experimental study on physical properties of modified jatropha oilbased nanofluids for machining purposes
by: Norfazillah, Talib, et al.
Published: (2022)

Machinability study on drilling austenite stainless steel 316l1 using minimum quantity lubrication (MQL) on surface roughness
by: Zuraifah, Kamarudin
Published: (2012)

Microstructure analysis of aluminium metal matrix alloy with silicon carbide and hexogonal boron nitride
by: Talib, Norfazillah, et al.
Published: (2020)

Detection Of Chipping In Ceramic Cutting Inserts From Workpiece Profile Signature During Turning Process Using Machine Vision
by: Kiow, Lee Woon
Published: (2017)

Detection Of Chipping In Ceramic Cutting Inserts From Workpiece Profile Signature During Turning Process Using Machine Vision
by: Lee, Woon Kiow
Published: (2017)

The tribological performance of nano-activated carbon as solid additives in modified calophyllum inophyllum based-metalworking fluid
by: Zubaidah, Zamri, et al.
Published: (2024)

Investigation of accuracy in microdrilling with minimum quantity lubrication
by: Mohammad, Yeakub Ali, et al.
Published: (2017)

Modified Tamanu Plant-Based Oil from Pahang Malaysia as biodegradable metalworking fluids
by: Amiril Sahab, Abdul Sani, et al.
Published: (2022)

Modified Tamanu Plant-Based Oil From Pahang Malaysia as Biodegradable Metalworking Fluids
by: Abdul Sani, Amiril Sahab, et al.
Published: (2023)

Modified Tamanu Plant-Based Oil From Pahang Malaysia as Biodegradable Metalworking Fluids
by: Abdul Sani, Amiril Sahab, et al.
Published: (2023)

Modified Tamanu Plant-Based Oil From Pahang Malaysia as Biodegradable Metalworking Fluids
by: Abdul Sani, Amiril Sahab, et al.
Published: (2023)

Modified Tamanu Plant-Based Oil From Pahang Malaysia as Biodegradable Metalworking Fluids
by: Abdul Sani, Amiril Sahab, et al.
Published: (2023)

Tribological Analyses of Modified Jatropha Oil with hBN and Graphene Nanoparticles as An Alternative Lubricant for Machining Process
by: Nur Athira, Jamaluddin, et al.
Published: (2020)

Tribological analyses of modified jatropha oil with hBN and graphene nanoparticles as an alternative lubricant for machining process
by: Jamaluddin, Nor Athira, et al.
Published: (2020)

Experimental Study of Lubricant Oil Film Behavior on Al6061 under MQL Milling Process
by: Nur Elya Haniza, Zamiruddin, et al.
Published: (2021)

Effect of Vegetable-Based Nanofluid Enriched with Nanoparticles as Metalworking Fluids During Orthogonal Cutting Process
by: Norfazillah, Talib, et al.
Published: (2022)

Effect of vegetable-based nanofluid enriched with nanoparticles as metalworking fluids during orthogonal cutting process
by: Talib, Norfazillah, et al.
Published: (2022)

Minimum quantity lubrication in micromachining: A greener approach
by: Zulkifli, Ahmad Syahmi Arham, et al.
Published: (2016)

Effects of minimum quantity lubrication technique in different machining
by: Urmi, W. T., et al.
Published: (2022)

Design of pulse jet coolant delivery system for minimal quantity lubricant (IP MQL) operation
by: Sapian, Nik Fazli
Published: (2012)

Tribological investigations on the application of oil-miscible ionic liquids additives in modified Jatropha-based metalworking fluid
by: Amiril Sahab, Abdul Sani, et al.
Published: (2018)

Analysis performance of modified tamanu oil enhanced with additives as potential green alternative in metalworking fluids
by: Amiril Sahab, Abdul Sani, et al.
Published: (2022)

Measurement of lubricant oil film thickness under minimum quantity lubrication milling process
by: Nur Elya Haniza, Zamiruddin
Published: (2022)