Physical properties of bitumen containing diatomite and waste engine oil
The addition of modifier, either to replace bitumen or as an additive, could potentially improve the performance of conventional bitumen used in road construction. This study characterizes the physical properties of bitumen 80/100 penetration grade modified with diatomite powder and waste engine oil...
| Main Authors: | Abdul Hassan, Norhidayah, Ruzi, Nur Azni, Mohd Shukry, Nurul Athma, Putra Jaya, Ramadhansyah, Hainin, Mohd Rosli, Mohd Kamaruddin, Nurul Hidayah, Abdullah, Mohd Ezree |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Penerbit UTM Press
2019
|
| Subjects: | |
| Online Access: | http://eprints.uthm.edu.my/4955/ http://eprints.uthm.edu.my/4955/1/AJ%202020%20%2835%29.pdf |
Similar Items
Improving energy efficiency at Palm Oil Mill Industries
by: Noranai, Zamri, et al.
Published: (2020)
by: Noranai, Zamri, et al.
Published: (2020)
Field performance of a constructed litter trap with oil and grease filter using low-cost materials
by: Rahmat, Siti Nazahiyah, et al.
Published: (2018)
by: Rahmat, Siti Nazahiyah, et al.
Published: (2018)
Design of experiment for in-situ synthesis of waste vegetable oils and synthetic based polyurethane (PU) foam composites
by: Abd Wahab, Hanani, et al.
Published: (2018)
by: Abd Wahab, Hanani, et al.
Published: (2018)
Study of virgin coconut oil cost and yield by using natural method fermentation
by: Abd Rahman, Misbahul Muneer, et al.
Published: (2020)
by: Abd Rahman, Misbahul Muneer, et al.
Published: (2020)
Basic Characterisation Of Oil Palm Shell As Constructed Wetland Media And The Effect Of Biofilm Formation On Its Adsorption Of Copper (II) Harry Chong Lye Hin.[TP684.P3 C548 2008 f rb].
by: Chong, Harry Lye Hin
Published: (2008)
by: Chong, Harry Lye Hin
Published: (2008)
Treatability Of Palm Oil Mill Effluent (Pome) Using Black Liquor In An Anaerobic Treatment Process
[TP683.P3 L755 2007 f rb].
by: Ling, Yu Lang
Published: (2007)
by: Ling, Yu Lang
Published: (2007)
Optimization Of Flame Retardant Composite Parameters Based On Oil Palm Trunk Using Response Surface Methodology And Its Suitability For Other Biomass
by: Yusof, Madihan
Published: (2024)
by: Yusof, Madihan
Published: (2024)
Transesterification Of Palm Cooking
Oil Using BiFeO3 Nanocatalyst
by: Razuki, Nor Amirah
Published: (2019)
by: Razuki, Nor Amirah
Published: (2019)
Characterization Of Carbohydrate
And Protein Accumulation In Oil Palm
Trees
by: Natra, Joseph Stalin
Published: (2018)
by: Natra, Joseph Stalin
Published: (2018)
Effect of oil mass flow rate on temperature profile in oil wells
by: M Elfaghi, Abdulhafid, et al.
Published: (2020)
by: M Elfaghi, Abdulhafid, et al.
Published: (2020)
Electronic design of portable ECT for crude palm oil quality monitoring system
by: Mohamad, Elmy Johana, et al.
Published: (2012)
by: Mohamad, Elmy Johana, et al.
Published: (2012)
Characteristics of oil palm biomass via mixture of Empty Fruit Bunch (EFB) fiber and mesocarp fiber
by: Halim, Zahurin, et al.
Published: (2011)
by: Halim, Zahurin, et al.
Published: (2011)
Special oil from date palm kernel
by: Mirghani, Mohamed Elwathig Saeed, et al.
Published: (2011)
by: Mirghani, Mohamed Elwathig Saeed, et al.
Published: (2011)
Compatibility of selected plant-based shortening as lard substitute: Microstructure, polymorphic forms and textural properties
by: Yanty, N. A M, et al.
Published: (2017)
by: Yanty, N. A M, et al.
Published: (2017)
Rapid methods for analysis of edible oils and fats by fourier transform infrared spectroscopy
by: Mirghani, Mohamed Elwathig Saeed
Published: (2010)
by: Mirghani, Mohamed Elwathig Saeed
Published: (2010)
Aerobic biodegradation of oil and grease in palm oil mill effluent using consortium of microorganisms
by: Jameel, Ahmad Tariq, et al.
Published: (2011)
by: Jameel, Ahmad Tariq, et al.
Published: (2011)
Seeds' oil as biolubricant
by: Mirghani, Mohamed Elwathig Saeed, et al.
Published: (2011)
by: Mirghani, Mohamed Elwathig Saeed, et al.
Published: (2011)
Mechanism of fat, oil and grease (FOG) deposit formation in sewer systems
by: Husain, Iman A. F., et al.
Published: (2014)
by: Husain, Iman A. F., et al.
Published: (2014)
Problems, control, and treatment of fat, oil, and grease (FOG): a review
by: Husain, Iman A. F., et al.
Published: (2014)
by: Husain, Iman A. F., et al.
Published: (2014)
Kernel functions for the support vector machine: comparing performances on crude oil price data
by: Chiroma, Haruna, et al.
Published: (2014)
by: Chiroma, Haruna, et al.
Published: (2014)
Autoignition behavior and emission of biodiesel from palm oil, waste cooking oil, tyre pyrolysis oil, algae and jatropha
by: Nursal, Ridwan Saputra, et al.
Published: (2021)
by: Nursal, Ridwan Saputra, et al.
Published: (2021)
Comparative study of the chemical kinetics of two catalysts used for esterification of sludge palm oil
by: Hayyan, Adeeb, et al.
Published: (2011)
by: Hayyan, Adeeb, et al.
Published: (2011)
Disinfection kinetics of Nahar (Mesua ferrea) Seed Kernel’s oil using pour plate method of the heterotrophic plate count
by: Adewale, Ahmed Idris, et al.
Published: (2011)
by: Adewale, Ahmed Idris, et al.
Published: (2011)
Bacterial population study in oil-contaminated and uncontaminated soils
by: Hadry Nordin, Noor Faizul Hadry, et al.
Published: (2018)
by: Hadry Nordin, Noor Faizul Hadry, et al.
Published: (2018)
Investigation of water flow and thermal characteristics in a fire tube boiler by using fluent / Mohd Isa Mohd Nasaruddin
by: Mohd Nasaruddin, Mohd Isa
Published: (2009)
by: Mohd Nasaruddin, Mohd Isa
Published: (2009)
Comparative study on using carbera odollam oil and palm oil for microbial lipase production / Mohd Zulhilmi Wan Salleh
by: Wan Salleh, Mohd Zulhilmi
Published: (2013)
by: Wan Salleh, Mohd Zulhilmi
Published: (2013)
Constitutive, institutive and up-regulation of carotenogenesis regulatory mechanism via in vitro culture model system and elicitors
by: Othman, Rashidi, et al.
Published: (2014)
by: Othman, Rashidi, et al.
Published: (2014)
Investigation of renewable polymer composite from waste oil endurance to UV irradiation exposure by using FTIR and UV-VIS
by: Mat Hassan, Nik Normunira, et al.
Published: (2018)
by: Mat Hassan, Nik Normunira, et al.
Published: (2018)
Determination of fatty acid methyl ester bytransesterification reaction of waste cooking oil obtained from different sources / Mardiana Abdul Rahim
by: Abdul Rahim, Mardiana
Published: (2009)
by: Abdul Rahim, Mardiana
Published: (2009)
Waste cooking oil-based polyurethane solid polymer
electrolyte : The effect of isocyanate structure / Nor Azmiera Kamarulzaman
by: Kamarulzaman, Nor Azmiera
Published: (2017)
by: Kamarulzaman, Nor Azmiera
Published: (2017)
Adsorption behaviour of carboxylic acid in cooking oil waste on steel in aqueous solution / Junaidah Jai, Wan Shabuddin Wan Ali and M.H. Ekramul
by: Jai, Junaidah, et al.
Published: (2013)
by: Jai, Junaidah, et al.
Published: (2013)
Oil spill absorbent from natural materials / Prof. Madya Dr. Ku Halim Ku Hamid and Puan Dayang Aishah Abang Chi
by: Ku Hamid, Ku Halim, et al.
Published: (2004)
by: Ku Hamid, Ku Halim, et al.
Published: (2004)
Emission characteristics of palm oil shell in a cascading hearth staged combustor / Wan Ahmad Najmi Wan Mohamed
by: Wan Mohamed, Wan Ahmad Najmi
Published: (2004)
by: Wan Mohamed, Wan Ahmad Najmi
Published: (2004)
Carbon nanotubes grown on oil palm shell powdered activated carbon as less hazardous and cheap substrate
by: Al Mamun, Abdullah, et al.
Published: (2018)
by: Al Mamun, Abdullah, et al.
Published: (2018)
Pyrolysis of Aleurites moluccana ( candle nut ) for bio-oil / Mohd Khairullah Mat Ani
by: Mat Ani, Mohd Khairullah
Published: (2009)
by: Mat Ani, Mohd Khairullah
Published: (2009)
Co-integration and causality between the spot and futures
markets: pre and post implementation of NKEAs / Mohamad Azwan Md Isa, Syamsyul Samsudin and Mohd Khairul Ariff Noh.
by: Md Isa, Mohamad Azwan, et al.
Published: (2016)
by: Md Isa, Mohamad Azwan, et al.
Published: (2016)
Optimization of oil yield of Phaleria macrocarpa seed using response surface methodology and its fatty acids constituents
by: Azmir, J., et al.
Published: (2014)
by: Azmir, J., et al.
Published: (2014)
Wettability of adhesive on oil palm lumber surface / Mohamad Azlie Abd Rahim
by: Abd Rahim, Mohamad Azlie
Published: (2016)
by: Abd Rahim, Mohamad Azlie
Published: (2016)
Strength properties of single pin dowel joint
on oil palm lumber / Sheikh Muhammad Shauqi Kamal Sheikh Osman
by: Sheikh Osman, Sheikh Muhammad Shauqi Kamal
Published: (2016)
by: Sheikh Osman, Sheikh Muhammad Shauqi Kamal
Published: (2016)
Phase behaviour and morphology in blends of polyether and polyacrylate with the addition of lithium salt / Assoc. Prof. Dr. Sim Lai Har … [et al.]
by: Sim, Lai Har, et al.
Published: (2013)
by: Sim, Lai Har, et al.
Published: (2013)
Similar Items
-
Improving energy efficiency at Palm Oil Mill Industries
by: Noranai, Zamri, et al.
Published: (2020) -
Field performance of a constructed litter trap with oil and grease filter using low-cost materials
by: Rahmat, Siti Nazahiyah, et al.
Published: (2018) -
Design of experiment for in-situ synthesis of waste vegetable oils and synthetic based polyurethane (PU) foam composites
by: Abd Wahab, Hanani, et al.
Published: (2018) -
Study of virgin coconut oil cost and yield by using natural method fermentation
by: Abd Rahman, Misbahul Muneer, et al.
Published: (2020) -
Basic Characterisation Of Oil Palm Shell As Constructed Wetland Media And The Effect Of Biofilm Formation On Its Adsorption Of Copper (II) Harry Chong Lye Hin.[TP684.P3 C548 2008 f rb].
by: Chong, Harry Lye Hin
Published: (2008)