Fabrication SiO2 -NiO foam via replication technique for steam methane reforming catalyst at low temperatures
Porous ceramic is a type of material that has highly open and partially interconnected pores. It has a wide range of applications, which include catalyst support, filtration, adsorption and separation.The aim of this study is to fabricate Silica-Nickel Oxide (SiO2-NiO) foams in the range 70 μm to...
| Main Author: | |
|---|---|
| Format: | Thesis |
| Language: | English English English |
| Published: |
2021
|
| Subjects: | |
| Online Access: | http://eprints.uthm.edu.my/1843/ http://eprints.uthm.edu.my/1843/2/RIZAMARHAIZA%20BINTI%20MUDA%20-%20declaration.pdf http://eprints.uthm.edu.my/1843/1/RIZAMARHAIZA%20BINTI%20MUDA%20-%2024p.pdf http://eprints.uthm.edu.my/1843/3/RIZAMARHAIZA%20BINTI%20MUDA%20-%20full%20text.pdf |
| _version_ | 1848887573135491072 |
|---|---|
| author | Muda, Rizamarhaiza |
| author_facet | Muda, Rizamarhaiza |
| author_sort | Muda, Rizamarhaiza |
| building | UTHM Institutional Repository |
| collection | Online Access |
| description | Porous ceramic is a type of material that has highly open and partially interconnected
pores. It has a wide range of applications, which include catalyst support, filtration,
adsorption and separation.The aim of this study is to fabricate Silica-Nickel Oxide
(SiO2-NiO) foams in the range 70 μm to 150μm open pore size, 75% to 90% of
porosity, good physical and mechanical properties as a criteria catalyst in the Steam
Methane Reforming (SMR) application. In this work, the porous foam fabricated
with different compositions of SiO2 as derived from Rice Husk Ash (RHA) (20% to
35%) and at different sintering temperatures (850°C to 1250°C) by using replication
sponge method. Characterisation of SiO2 and SiO2-NiO foams included
morphological analysis, porosity and density test, and compression test as criteria
compatibility of SiO2 and NiO as a catalyst in methane reforming. The morphology
result showed open pores with size ranging from 15.13 μm to 76.06 μm. The lowest
result for apparent porosity obtained was 65% and the highest was 81.74%, while the
lowest and highest values for bulk density were 0.626 g/cm3 and 1.070 g/cm3,
respectively. The result for compressive strength was within the range of 0.06 MPa
to 0.47 MPa. Throughout the observations, the maximum performance shown the
SiO2-NiO foam produced with 35wt% SiO2 and 5wt% NiO was found to have
mechanical and physical properties much like those of a filter catalyst in SMR. The
methane (CH4) conversion using the SiO2-NiO foam was shown the range of
34.72% to 42.6% at different low temperatures. The results proved that the foam
from silica as derived from RHA and NiO is very suitable to be used as a catalyst in
SMR due to achieved the minimum CH4 conversion over than 21%. |
| first_indexed | 2025-11-15T19:56:32Z |
| format | Thesis |
| id | uthm-1843 |
| institution | Universiti Tun Hussein Onn Malaysia |
| institution_category | Local University |
| language | English English English |
| last_indexed | 2025-11-15T19:56:32Z |
| publishDate | 2021 |
| recordtype | eprints |
| repository_type | Digital Repository |
| spelling | uthm-18432021-10-12T04:06:21Z http://eprints.uthm.edu.my/1843/ Fabrication SiO2 -NiO foam via replication technique for steam methane reforming catalyst at low temperatures Muda, Rizamarhaiza TA401-492 Materials of engineering and construction. Mechanics of materials Porous ceramic is a type of material that has highly open and partially interconnected pores. It has a wide range of applications, which include catalyst support, filtration, adsorption and separation.The aim of this study is to fabricate Silica-Nickel Oxide (SiO2-NiO) foams in the range 70 μm to 150μm open pore size, 75% to 90% of porosity, good physical and mechanical properties as a criteria catalyst in the Steam Methane Reforming (SMR) application. In this work, the porous foam fabricated with different compositions of SiO2 as derived from Rice Husk Ash (RHA) (20% to 35%) and at different sintering temperatures (850°C to 1250°C) by using replication sponge method. Characterisation of SiO2 and SiO2-NiO foams included morphological analysis, porosity and density test, and compression test as criteria compatibility of SiO2 and NiO as a catalyst in methane reforming. The morphology result showed open pores with size ranging from 15.13 μm to 76.06 μm. The lowest result for apparent porosity obtained was 65% and the highest was 81.74%, while the lowest and highest values for bulk density were 0.626 g/cm3 and 1.070 g/cm3, respectively. The result for compressive strength was within the range of 0.06 MPa to 0.47 MPa. Throughout the observations, the maximum performance shown the SiO2-NiO foam produced with 35wt% SiO2 and 5wt% NiO was found to have mechanical and physical properties much like those of a filter catalyst in SMR. The methane (CH4) conversion using the SiO2-NiO foam was shown the range of 34.72% to 42.6% at different low temperatures. The results proved that the foam from silica as derived from RHA and NiO is very suitable to be used as a catalyst in SMR due to achieved the minimum CH4 conversion over than 21%. 2021-03 Thesis NonPeerReviewed text en http://eprints.uthm.edu.my/1843/2/RIZAMARHAIZA%20BINTI%20MUDA%20-%20declaration.pdf text en http://eprints.uthm.edu.my/1843/1/RIZAMARHAIZA%20BINTI%20MUDA%20-%2024p.pdf text en http://eprints.uthm.edu.my/1843/3/RIZAMARHAIZA%20BINTI%20MUDA%20-%20full%20text.pdf Muda, Rizamarhaiza (2021) Fabrication SiO2 -NiO foam via replication technique for steam methane reforming catalyst at low temperatures. Doctoral thesis, Universiti Tun Hussein Onn Malaysia. |
| spellingShingle | TA401-492 Materials of engineering and construction. Mechanics of materials Muda, Rizamarhaiza Fabrication SiO2 -NiO foam via replication technique for steam methane reforming catalyst at low temperatures |
| title | Fabrication SiO2 -NiO foam via replication technique for steam methane reforming catalyst at low temperatures |
| title_full | Fabrication SiO2 -NiO foam via replication technique for steam methane reforming catalyst at low temperatures |
| title_fullStr | Fabrication SiO2 -NiO foam via replication technique for steam methane reforming catalyst at low temperatures |
| title_full_unstemmed | Fabrication SiO2 -NiO foam via replication technique for steam methane reforming catalyst at low temperatures |
| title_short | Fabrication SiO2 -NiO foam via replication technique for steam methane reforming catalyst at low temperatures |
| title_sort | fabrication sio2 -nio foam via replication technique for steam methane reforming catalyst at low temperatures |
| topic | TA401-492 Materials of engineering and construction. Mechanics of materials |
| url | http://eprints.uthm.edu.my/1843/ http://eprints.uthm.edu.my/1843/2/RIZAMARHAIZA%20BINTI%20MUDA%20-%20declaration.pdf http://eprints.uthm.edu.my/1843/1/RIZAMARHAIZA%20BINTI%20MUDA%20-%2024p.pdf http://eprints.uthm.edu.my/1843/3/RIZAMARHAIZA%20BINTI%20MUDA%20-%20full%20text.pdf |