Design Of Receiver Lowpass Filter For UWB Application Using 0.18μm Cmos Technology
The design and analysis of a baseband lowpass filter for UWB application in front end receiver is presented in this report. The objective of this project is to design a lowpass filter which operates with voltage 1.80V and has a bandwidth 264.00MHz by using Silterra 0.18um SMCMOS technology. Tr...
| Main Author: | |
|---|---|
| Format: | Monograph |
| Language: | English |
| Published: |
Universiti Sains Malaysia
2006
|
| Subjects: | |
| Online Access: | http://eprints.usm.my/58660/ http://eprints.usm.my/58660/1/Design%20Of%20Receiver%20Lowpass%20Filter%20For%20UWB%20Application%20Using%200.18%CE%BCm%20Cmos%20Technology_Khor%20Boon%20Tiang.pdf |
| Summary: | The design and analysis of a baseband lowpass filter for UWB application in
front end receiver is presented in this report. The objective of this project is to design a
lowpass filter which operates with voltage 1.80V and has a bandwidth 264.00MHz by
using Silterra 0.18um SMCMOS technology. Transconductor-capacitor filter is the filter
architecture being chosen to design and analysis the lowpass filter due to its capability to
operate in high frequency, but low power and low cost as compared to passive filter. First
to fourth order Gm-C Butterworth lowpass filter is designed and their performance is
compared to allow effective filter order selection. First order Gm-C Butterworth lowpass
filter has bandwidth 264.00MHz and DC gain of -0.25dB. The 1dB compression point of
first order filter is 3.68dBm and third order intercepts point (IP3) at 11.69dBm. The power
consumption of first order filter is 5.00mW. Second order filter has bandwidth of
264.00Mhz, DC gain of -0.13dB, 1dB compression point at -0.64dBm, IP3 at 6.05dBm and
power consumption of 10.01mW. The third order Gm-C filter has bandwidth 264.00MHz,
DC gain of -0.38dB, 1dB compression point at -0.077dBm IP3 at 6.61dBm, power
consumption of 15.02mW. The forth order Gm-C filter has bandwidth 264.00MHz, DC
gain of -0.26dB, 1dB compression point at -1.92dBm IP3 at 4.50dBm, power consumption
of 20.02mW. Third order Gm-C Butterworth lowpass filter has been chosen as baseband
filter due to its sharper rolloff in transition from passband to stopband than first and
second order filter, and has a better linearity than fourth order filter. The third order filter
consists of 72 transistors and 3 MIM capacitor. The size of layout of third order Gm-C
filter is 294 286 μm× μm . The designed filter will be sent to Silterra for fabrication into
chip and furthermore chip characterization and measurement will be carried out to make
sure the measurement of real filter chip can match well as closed as to the simulated result
of filter design. |
|---|