Optimization Of Wire And Tube Condenser In Refrigeration Cycle
This thesis presents the experimental results of condenser that are commonly used in vapor compression cycle based on domestic refrigerators. The type of condenser that been used in this experiment is wire and tube condenser. A condenser was experimentally tested in a real refrigerator for som...
| Main Author: | |
|---|---|
| Format: | Monograph |
| Language: | English |
| Published: |
Universiti Sains Malaysia
2004
|
| Subjects: | |
| Online Access: | http://eprints.usm.my/57101/ http://eprints.usm.my/57101/1/Optimization%20Of%20Wire%20And%20Tube%20Condenser%20In%20Refrigeration%20Cycle_Wan%20Mohd%20Fadhli%20Wan%20Mamat.pdf |
| Summary: | This thesis presents the experimental results of condenser that are commonly used
in vapor compression cycle based on domestic refrigerators. The type of condenser that
been used in this experiment is wire and tube condenser. A condenser was experimentally
tested in a real refrigerator for some operating conditions.
Based on an ideal performance of a wire and tube condenser, this experiment
allowed a comparison between the actual result and the simulation one. The most
important parameters that been measured is the temperature of the condenser surface at
the point selected. This temperature will show whether the condenser operating at the
required performance or not.
Some change can be made to the condenser to make it operating at the maximum
efficiency. In condenser optimization, the performance efficiency of the condenser can be
change by changing the length and diameter of the wire and tube condenser. Pressure in
the refrigeration cycle also influences the performance of the refrigerator. These things
must be in a perfect set up in order to get a perfect operating refrigerator. |
|---|