The Effect Of Alloying Elements On
Wear Behaviour Of Ni-Al

QR Code

The Effect Of Alloying Elements On Wear Behaviour Of Ni-Al

Considerable amount of research has been performed on nickel aluminide (NiAl) over the last decade, with an exponential increase in effort occurring over the last few years. The enormouS potential of NiAI systems mainly from its many attractive properties, such as high oxidation and corrosion res...

Full description

Bibliographic Details
Main Author:	Ishak, Mohamad Izha
Format:	Thesis
Language:	English
Published:	2004
Subjects:	TN1-997 Mining engineering. Metallurgy
Online Access:	http://eprints.usm.my/30740/ http://eprints.usm.my/30740/1/MOHAMAD_IZHA_ISHAK.pdf

Similar Items

Effect Of Alloying Elements On Microstructure And Properties Of Cast γ-TiAI Intermetallic Alloys.
by: Husni, Husni, et al.
Published: (2005)

The Effect Of Chromium (Cr) Alloying Addition On The Microstructure Of Titanium Aluminides Alloys Related To Its Oxidation Behaviour.
by: Manalu, Okti J. P., et al.
Published: (2005)

Effect of alloying elements on properties of aluminide-base intermetallic material developed via powder metallurgy route.
by: Hussain, Zuhailawati, et al.
Published: (2007)

Multiaxial Fatigue Behaviour Of Heat Treated 6061 Aluminium Alloy
by: Marno, Marini
Published: (2011)

Effect Of Nb, Cr And W On The High Temperature Oxidation Behavior Of Ti-Al Alloys
by: Sapiai, Napisah
Published: (2011)

Fabrication Of y-TiAl Intermetallic Alloys Via Hot Pressing Technique.
by: Usman, H., et al.
Published: (2004)

The Influence Of Equal Channel Angular Pressing Angles On The Microstructure And Properties Of Al-Si-Mg Alloy
by: Al-Jubouri, Ali Abadi Altayef
Published: (2006)

Microstructural evaluation and corrosion behaviour of Fe-Cr-Ni-Mn-Co AND AI0.5-Fe-Cr-Ni-Mn-Co highentropy alloys (HEA) with elemental additions / Siti Sarah Mohd Pauzi
by: Mohd Pauzi, Siti Sarah
Published: (2018)

The Effect Of Aluminum Content On Properties Of TiAI Based Binary Alloys.
by: Manalu, Okti J. P., et al.
Published: (2005)

Fabrication And Characterization Of Lead Free Pewter Alloys
by: Chou, Soklin
Published: (2011)

Corrosion behaviour of Al 2009 reinforced with silicon carbide whiskers.
by: Shamsul, J. B., et al.
Published: (2009)

Effects Of Mg, Si And Cu On Ageing Response Of Dilute 6XXXX Series Aluminium Alloys
by: Jaafar, Che Nor Aiza
Published: (2011)

Effect Of Annealing Condition On The Electrical And Structural Properties Of Ferroelectric CCTO Prepared By Mechanical Alloying Technique.
by: Hutagalung, Sabar Derita, et al.
Published: (2006)

The Effect Of Alloying Elements On Wear Behaviour Of Ni-Al [TA483. I98 2004 f rb] [Microfiche 7664].
by: Ishak, Mohamad Izha
Published: (2004)

Effect Of Secondary Plastic Deformation On The Microstructures And Mechanical Properties Of Cast Ai-7Si-Mg Alloy
by: Thuong, Nguyen Van
Published: (2014)

Joining Of Alumina-Based Composite To 6061 Aluminum Alloy By Friction Welding
by: Safarzadeh, Marjan
Published: (2014)

Atomized Lead Free Solder Alloys For Solder Paste Product For Electronic Application
by: Bakir, Mohammed Luay
Published: (2012)

Fabrication And Characterisation Of Copper Composites Reinforced With Transition Metal Carbides Via Mechanical Alloying
by: Subhi, Nur Hawadah Mohd
Published: (2011)

Interfacial Reactions And Electromigration In Lead-Free Solder Joints With Copper And Au-Ni Surface Finished Copper Substrates
by: Binh, Duong Ngoc
Published: (2009)

Preparation Of In-Situ Carbides Reinforced Hybrid Copper-Based Composite By Mechanical Alloying And Its Characterization
by: Le , Minh Hai
Published: (2010)

Effect of pro-degradant additive on behaviour and kinetic degradation of polypropylene film.
by: Islam, Noor Zalikha Mohamed
Published: (2011)

Optimization of wear and hardness of Al–Zn–Mg–Cu alloy fabricated from recycled beverage can using response surface methodology
by: Kazeem, Abubakar, et al.
Published: (2020)

Study Of The Redox And Acid-Base Properties Of Soda-Lime Silicate Glass: Application To The High Temperature Corrosion Of Nickel-Based Alloys And Ceramic Materials
by: Abdullah, Tuti Katrina
Published: (2014)

Effect of Sc Addition on the Microstructure and Wear Properties of A356 Alloy and A356–TiB2in Situ Composite
by: A. K., Prasada Rao, et al.
Published: (2015)

Flow Behaviour And Viscoelasticity Of Polypropylene-Kaolin Composites
by: Rahim, Azura Abdul
Published: (2010)

Evaluation On Flow Behaviour Of Polypropylene/Kaolin Composites At High Shear Stress
by: Jikan, Suzi Salwah
Published: (2010)

Effect of Clay Addition on Mechanical Properties of Unsaturated Polyester/Glass Fiber Composites
by: Kusmono, Kusmono, et al.
Published: (2013)

Mechanical And Corrosion BEHAVIOR OF In-SITU PARTICULATES (Al2O3, Tib2, Tic) Reinforced Fe-Al Intermetallic Composites
by: Huy, Tran Duc
Published: (2010)

Compressive Behaviour Of Syntactic Foam Filled With Epoxy Hollow Spheres Having Different Wall Thickness.
by: M. Ariff, Z, et al.
Published: (2010)

Effect of Zeolite Modification via Cationic Exchange Method on Mechanical, Thermal, and Morphological Properties of Ethylene Vinyl Acetate/Zeolite Composites
by: Zaharri, N. D., et al.
Published: (2013)

Creep And Isothermal Fatigue Behaviour Of Eutectic SnPb, SnBi And SnZn Solders For Microelectronic Packaging At Mildly Elevated Temperatures
by: Hashim, Md. Amin
Published: (2011)

Effect Of Organoclay Modification On The Mechanical, Morphology, And Thermal Properties Of Injection Molded Polyamide 6/Polypropylene/Montmorillonite Nanocomposites.
by: Mohd Ishak, Z.A., et al.
Published: (2008)

Observation on void formed in oxide scale of Fe-Cr-Ni alloy at 1073K in dry and humid environments
by: Kaderi, Akbar, et al.
Published: (2011)

Characterization and corrosion behaviour of 96.5Sn-3.0Ag-0.5Cu solder on Cu substrate at different reflow reactions
by: Lee, Liu Mei
Published: (2013)

Formation Of CuAlO2 Thin Films By Ultrasonic Spray Pyrolysis For Photodiode Applications
by: Suhariadi, Iping
Published: (2011)

Nucleation in Al Alloys Processed By MCDC Casting
by: A. K., Prasada Rao
Published: (2015)

Preparation And Properties Of Mica Filled Virgin And Recycled Ethylene Propylene Diene Monomer (Epdm) Composites
by: Ishak, Sarah
Published: (2014)

Hygrothermal And Wear Behaviour Of Short Carbon Fiber Reinforced Polycarbonate
by: Othman, Ainnur Hanim
Published: (2018)

Modelling And Simulation Of Air Classifier Cement Manufacturing
by: Ishak, Ku Esyra Hani Binti
Published: (2014)

Penilaian Kelakuan Hasil Kimpalan Geseran Untuk Logam Kep Ada Logam (Cu-Keluli Dan Al-Keluli) Dan Seramik Kepada Logam (Ab03-A1)
by: Yeoh, Cheow Keat
Published: (2004)