Mechanical, tribological and cytocompatibility properties of cellulose nanofiber-reinforced ultra-high molecular weight polyethylene composites

QR Code

Mechanical, tribological and cytocompatibility properties of cellulose nanofiber-reinforced ultra-high molecular weight polyethylene composites

Ultra-high molecular weight polyethylene (UHMWPE) tibial insert in knee prosthesis possesses limited longevity due to the continuous sliding and rolling movement of the highly stiff metal femoral counterpart onto its surface which leads to the abrasion and wear. This generates wear debris that su...

Full description

Bibliographic Details
Main Author:	Sharip, Nur Sharmila
Format:	Thesis
Language:	English
Published:	2022
Subjects:	Cellulose Nanofibers Ultrahigh molecular weight polyethylene
Online Access:	http://psasir.upm.edu.my/id/eprint/99664/ http://psasir.upm.edu.my/id/eprint/99664/1/NUR%20SHARMILA%20BINTI%20SHARIP%20-%20IR.pdf

Similar Items

Cellulose nanofibers from oil palm mesocarp fiber and their utilization as reinforcement material in low density polyethylene composites
by: Tengku Yasim Anuar, Tengku Arisyah
Published: (2018)

Wear and degradation of uhmwpe total hip replacement components
by: Kipping, Michael
Published: (2009)

PROPERTIES CELLULOSE NANOFIBRES ISOLATED FROM KENAF
by: Osman Al-Edrus, Syeed SaifulAzry
Published: (2011)

Mechanical characterisation of novel polyethylene-based nanocomposites
by: Alghamdi, Abdulaziz
Published: (2014)

Molecular weight analysis of starches: which technique?
by: Harding, Stephen E., et al.
Published: (2016)

Superheated steam pretreatment of oil palm biomass for improving nanofibrillation of cellulose and performance of polypropylene/cellulose nanofiber composites
by: Norrrahim, Mohd Nor Faiz
Published: (2018)

Fabrication and properties of tree-branched cellulose nanofibers (CNFs) via acid hydrolysis assisted with pre-disintegration treatment
by: Li, Jun, et al.
Published: (2022)

Preparation and Characterization of Natural Rubber-, Polyethylene- And Natural Rubber/Polyethylene-Clay Nanocomposites
by: Abdullah, Mohd Aidil Adhha
Published: (2007)

Melt- vs. non-melt blending of complexly processable ultra-high molecular weight polyethylene/ cellulose nanofiber bionanocomposite
by: Sharip, Nur Sharmila, et al.
Published: (2021)

Comparative heterogeneity, molecular weights and viscosities of xanthans of different pyruvate and acetate content
by: Erten, Tayyibe, et al.
Published: (2014)

Parameters optimization in compression molding of ultra-high molecular weight polyethylene/cellulose nanofiber bio-nanocomposites by using response surface methodology
by: Sharip, Nur Sharmila, et al.
Published: (2020)

Process optimization of ultra-high molecular weight polyethylene/cellulose nanofiber bionanocomposites in triple screw kneading extruder by response surface methodology
by: Sharip, Nur Sharmila, et al.
Published: (2020)

Preparation and characterisation of hydrogel film and nanofiber from carboxymethyl-based cellulose and sago pulp for controlled release application
by: Mohd Kanafi, Nafeesa
Published: (2018)

Synthesis, Characterization and Application of Carbon Nanotubes and Carbon Nanofibers
by: Hussien, Muataz Ali Atieh
Published: (2005)

Characterization of nanocomposites based on plasticized starch and kenaf bast nanofibers
by: Karimimazraehshahi, Samaneh
Published: (2014)

The formation of aromatic hydrocarbons during the pyrolysis of polyethylene
by: Choo, W., et al.
Published: (2010)

Preparation and characterization of polyvinyl alcohol- graphene oxide/poly(3,4-ethylenedioxythiophene) composite nanofiber
by: Zubair, Nur Afifah
Published: (2016)

Preparation and characterization of Carbon Nanotube/Graphite Nanofiber and Carbon Nanotube/Graphite Nanofiber/Metal Oxide (Metal = Zn and Fe) nanocomposites for supercapacitor application
by: Ramli, Nurul Infaza Talalah
Published: (2016)

Polyethylene single bubble insulation capability in reducing cooling load of a lecture hall
by: Muhieldeen, Mohammed W.
Published: (2011)

Cellulose nanofiber as nucleating agent and reinforcement material in improving crystallization and mechanical properties of polylactic acid nanocomposites
by: Shamsudin, Siti Shazra Shazleen
Published: (2021)

Covalent immobilization of α-CGTase on cellulose nanofiber derived from kenaf bast for enzymatic membrane reactor
by: Sulaiman, Safwan
Published: (2018)

Lignin-containing cellulose nanofibrils improving the papermaking process and the properties of handsheet paper
by: Mhd Idris, Farah Nabila
Published: (2023)

Parameters optimization in compression molding of ultrahigh molecular weight polyethylene/cellulose nanofiber bionanocomposites by using response surface methodology
by: Sharip, Nur Sharmila, et al.
Published: (2020)

Analysis of fluted natural fibre reinforced high density polyethylene roofing panel / Nurul Atiqah Mohd Ayob
by: Mohd Ayob, Nurul Atiqah
Published: (2018)

Mechanical and thermal characterization of hybridized short kenaf/pineapple leaf fiber reinforced high density polyethylene composites
by: Isuwa, Suleiman Aji
Published: (2011)

In Vitro Studies on the Adhesion of Fibrobacter Succinogenes Strain D3 to Macrocrystalline Cellulose
by: Sieo, Chin Chin
Published: (1997)

The roles of blending and of molecular weight distribution on craze initiation
by: Sánchez-Valencia, Andrea, et al.
Published: (2017)

Development of optimised model for polyethylene infrastructure monitoring using mobile laser scanning technique
by: Al-Hader, Mahmoud Fawzi
Published: (2011)

Characterization of mechanical, morphological and thermal properties of low density polyethylene nanocomposite using alumina nano-particles as filler
by: Ngu, Jenney Lim Song
Published: (2010)

Biodegradation of low-density polyethylene (LDPE) mixed with potato starch by Aspergillus niger rhizopus oryzae and their biofilms / Nurhidayah Zakaria
by: Zakaria, Nurhidayah
Published: (2020)

Effects of fibre loading and nano-silica on physical, mechanical and thermal properties of bagasse fibrefilled recycle high-density polyethylene
by: Salleh, Qamariah Norhidayah
Published: (2019)

Concrete compressive strength development when polyethylene terephthalate partially replaces sand / Muhammad Redza Rosman and Norishahaini Mohamed Ishak
by: Muhammad Redza, Rosman, et al.
Published: (2015)

Characteristics and mechanical properties changes due to incorporation of aloe vera in polyethylene-based film / Siti Fatma Abd Karim …[et al.]
by: Abd Karim, Siti Fatma, et al.
Published: (2020)

Effects of Crude Palm Oil on the Physico-Chemical Properties of Polyethylene Blown Film
by: Aung, Min Min
Published: (2006)

Characterization of millet husk-filled high density polyethylene and polylactic acid composites
by: Abba, Hammajam A.
Published: (2018)

Synthesis and characterization of electrospun-cellulose fibre/graphene oxide for organophosphorus pesticides adsorption study using microextraction approach
by: Aris, Nor Izzati Fikrah
Published: (2019)

A nonenzymatic sensor for xanthine based on electrospun carbon nanofibers modified electrode
by: Tang, X., et al.
Published: (2011)

Synthesis of carbon nanofibers for mediatorless sensitive detection of NADH
by: Liu, Yang, et al.
Published: (2008)

Purification of glycolytic product from polyethylene terephthalate (pet) waste by a two-stage evaporation process
by: Goh, Hui Wen
Published: (2012)

Production, characterization and migration of melt-blended and layer-deposited polyethylene silver nanocomposite as antibacterial food packaging
by: Jokar, Maryam
Published: (2012)