Tensile strength and corrosion resistance properties of porous Al2O3/Ni composites prepared with rice husk pore-forming agent

QR Code

Tensile strength and corrosion resistance properties of porous Al2O3/Ni composites prepared with rice husk pore-forming agent

The mechanical performance and chemical stability of porous alumina materials operating under harsh service conditions are of utmost importance in understanding their operational behavior if they are to stand the test of time. In the present study, the joint effect of nickel (Ni) reinforcement and r...

Full description

Bibliographic Details
Main Authors:	Dele-Afolabi, Temitope Theophilus, Mohamed Ariff, Azmah Hanim, Mazlan, Norkhairunnisa, Sobri, Shafreeza, Calin, Recep, Zahari, Nur Ismarrubie
Format:	Article
Language:	English
Published:	Elsevier 2018
Online Access:	http://psasir.upm.edu.my/id/eprint/74098/ http://psasir.upm.edu.my/id/eprint/74098/1/RICE.pdf

Similar Items

Agro-waste shaped porous Al2O3/Ni composites: corrosion resistance performance and artificial neural network modelling
by: Mohamed Ariff, Azmah Hanim, et al.
Published: (2018)

Investigating the effect of porosity level and pore former type on the mechanical and corrosion resistance properties of agro-waste shaped porous alumina ceramics
by: Dele-Afolabi, Temitope T., et al.
Published: (2017)

Significant effect of rice husk and sugarcane bagasse pore formers on the microstructure and mechanical properties of porous Al2O3/Ni composites
by: Temitope T., Dele-Afolabi, et al.
Published: (2018)

Research trend in the development of macroporous ceramic components by pore forming additives from natural organic matters: a short review
by: Dele-Afolabi, Temitope Theophilus, et al.
Published: (2017)

Experimental and numerical investigation of plain and Ni-reinforced porous alumina ceramics composites produced with agro-waste pore formers
by: Theophilus, Dele-Afolabi Temitope
Published: (2018)

Research trend in the processing and application of macroporous ceramic components
by: Dele-Afolabi, Temitope Theophilus, et al.
Published: (2017)

Rice husk as a pore-forming agent: impact of particle size on the porosity and diametral tensile strength of porous alumina ceramics
by: T. T., Dele-Afolabi, et al.
Published: (2022)

Intermetallics evolution and shear strength of carbon nanotubes- reinforced sn-5sb solder on copper board
by: Dele-Afolabi, Temitope Theophilus
Published: (2015)

An investigation of production and properties of RHA reinforced hybrid composites by vacuum infiltration method
by: Tanaay, Naci Arda, et al.
Published: (2021)

Jaya algorithm hybridized with extreme gradient boosting to predict the corrosion-induced mass loss of agro-waste based monolithic and Ni-reinforced porous alumina
by: Dele-Afolabi, T.T., et al.
Published: (2024)

Interfacial microstructure evolution and shear strength of MWCNTs-reinforced Sn-1.0Ag-0.5Cu (SAC105) composite solder interconnects on plain Cu and ENIAg surface finish
by: Dele-Afolabi, Temitope T., et al.
Published: (2022)

Influence of multi-walled carbon nanotubes on melting temperature and microstructural evolution of Pb-free Sn-5Sb/Cu solder joint
by: Theophilus, Dele-Afolabi Temitope, et al.
Published: (2015)

Impact of different isothermal aging conditions on the IMC layer growth and shear strength of MWCNT-reinforced Sn-5Sb solder composites on Cu substrate
by: T. Temitope, Dele Afolabi, et al.
Published: (2019)

Shear analysis of rice husk ash RHA reinforced tin- 0.7-copper composite solders on electroless nickel/immersion silver ENIAg surfaces
by: Mohamed Ariff, Azmah Hanim, et al.
Published: (2021)

Rice husk ash as pore former and reinforcement on the porosity, microstructure, and tensile strength of aluminum mmc fabricated via the powder metallurgy method
by: Mohamed Ariff, Azmah Hanim, et al.
Published: (2022)

Preparation and characterization of porous alumina ceramics using different pore agents
by: Ali, Mohammed Sabah, et al.
Published: (2017)

Microstructural, physical and mechanical analysis of RHA pore modified porous alumina with aluminum as reinforcement
by: Mohd Najib, Mohamad Aznan, et al.
Published: (2019)

Temporary sound barrier system from natural fiber polymeric composite
by: Hanim Mohamed Ariff, Azmah, et al.
Published: (2023)

Physical and mechanical properties enhancement of lead free solders reinforced with carbon nanotubes: a critical review
by: Dele-Afolabi, T. T., et al.
Published: (2014)

The effect of nano-copper additives on the porosity, mechanical properties, and microstructure of alumina ceramics using commercial rice husk ash as a pore former
by: Ali, Mohammed Sabah, et al.
Published: (2017)

Organic waste-derived pore formers for macroporous ceramics fabrication: a review on synthesis, durability properties and potential applications.
by: Dele-Afolabi, T.T., et al.
Published: (2024)

Effect of nanocopper additives on the physical properties of porous alumina ceramics using graphite waste as a pore-forming agent
by: Ali, Mohammed Sabah, et al.
Published: (2019)

Interfacial microstructure evolution and shear strength of MWCNTs-reinforced Sn-1.0Ag-0.5Cu (SAC105) composite solder interconnects on plain Cu and ENIAg surface finish
by: Dele-Afolabi, T. T., et al.
Published: (2022)

Determination of pore network accessibility in hierarchical porous solids
by: Rigby, Sean P., et al.
Published: (2017)

Controlling the sintering response in the development of multilayered components produced via powder injection molding route—a review
by: Ojo-Kupoluyi, Oluwatosin Job, et al.
Published: (2020)

Corrosion inhibition studies of cashew nut (Anacardium occidentale) on carbon steel in 1.0 M hydrochloric acid environment
by: Mohammed, Hassan, et al.
Published: (2018)

Inhibitive effect of Cocon nucifera L. (coconut pulp) extract on mild steel acid corrosion
by: Sobri, Shafreeza, et al.
Published: (2017)

Inhibitive effect of Cocon nucifera L. (coconut pulp) extract on mild steel acid corrosion
by: Sobri, Shafreeza, et al.
Published: (2015)

Refining pore size, functionality and stability in porous hybrid frameworks
by: Nevin, Adam C
Published: (2017)

Moisture transport through pores in porous asphalt pavement materials
by: Abou-Foul, Mustafa
Published: (2019)

Fabrication Of Porous Calcium Sulphate By Using Yeast As Pore Foamer
by: Norridzwan, Ahmad Syamil
Published: (2022)

Microstructural and shear strength properties of RHA-reinforced Sn–0.7Cu composite solder joints on bare Cu and ENIAg surface finish
by: Mohamed Ariff, Azmah Hanim, et al.
Published: (2020)

Synthesis of macro porous ceramic materials
by: M. A., Azmah Hanim
Published: (2021)

Portable constant load tensile-corrosion test system
by: Baharudin, B. T. Hang Tuah, et al.
Published: (2013)

Thermogravimetric analysis on rice husk ashes-based geopolymer paste
by: Nasrudin, Nurul Reffa Azyan, et al.
Published: (2018)

A novel method for the manufacture of porous structures with multi-component, coated pores
by: Siddiq, Abdur R., et al.
Published: (2017)

Fabrication and characterization of the porous titanium alloy by argon filled pore expansion technique
by: Nugroho, A., et al.
Published: (2018)

Modified cenospheres as non-sacrificial pore-forming agent for porous mullite ceramics
by: Choo, Thye Foo, et al.
Published: (2019)

Porous and dense Ni hollow fibre membranes
by: Meng, B., et al.
Published: (2009)

Investigation on the wear behaviour and properties of RHA reinforced 7075 aluminium t6 composites produced by vacuum infiltration
by: Tanis, Naci Arda, et al.
Published: (2022)