Optimal placement and sizing of STATCOM(s) for power system security improvement using MOPSO
The massive increase in both electrical power demand and the penetration level of renewable-based distributed generation at the distribution system has contributed to large amount of power flow in the grid's utility. As a consequence, part of the transmission networks is congested that led to u...
| Main Authors: | Ismail, Bazilah, Abdul Wahab, Noor Izzri, Othman, Mohammad Lutfi, Mohd Radzi, Mohd Amran, Abdul Kahar, Nor Hidayah, Awalin, Lilik Jamilatul |
|---|---|
| Format: | Conference or Workshop Item |
| Published: |
IEEE
2022
|
| Online Access: | http://psasir.upm.edu.my/id/eprint/44206/ |
Similar Items
Optimal placement of DSTATCOM in distribution network based on load flow and voltage stability indices studies
by: Ismail, Bazilah, et al.
Published: (2017)
by: Ismail, Bazilah, et al.
Published: (2017)
Optimal placement and sizing of multiple STATCOM in distribution system to improve voltage profile
by: Moghbel, Moayed, et al.
Published: (2016)
by: Moghbel, Moayed, et al.
Published: (2016)
Power quality improvement in distribution systems considering Optimum
D-STATCOM placement
by: Farhoodnea, Masoud, et al.
Published: (2013)
by: Farhoodnea, Masoud, et al.
Published: (2013)
Power Quality Improvement Using Distribution Static Compensator (D-Statcom) On 11 Kv Distribution System
by: Hj.Abdul Wahab, Noor Izzri
Published: (2002)
by: Hj.Abdul Wahab, Noor Izzri
Published: (2002)
Adverse impact of STATCOM on the performance of distance relay
by: Aker, Elhadi Emhemad, et al.
Published: (2017)
by: Aker, Elhadi Emhemad, et al.
Published: (2017)
The optimal location and sizing of single and multiple statcom using analytical approaches under high loading occasion
by: Ismail, Bazilah, et al.
Published: (2022)
by: Ismail, Bazilah, et al.
Published: (2022)
Power outage prediction by using logistic regression and decision tree
by: Alia Yasmin, Nor Saidi, et al.
Published: (2021)
by: Alia Yasmin, Nor Saidi, et al.
Published: (2021)
Static Compensator (STATCOMs) in Power Systems
Published: (2014)
Published: (2014)
Voltage stability indices studies on optimal location of wind farm in distribution network
by: Ismail, Bazilah, et al.
Published: (2017)
by: Ismail, Bazilah, et al.
Published: (2017)
Development of a deep learning model for prediction of cardiovascular disease
by: Mohd Syafiq Asyraf, Suhaimi, et al.
Published: (2025)
by: Mohd Syafiq Asyraf, Suhaimi, et al.
Published: (2025)
Design and simulation of a distribution STATCOM considering voltage sag mitigation and harmonic elimination
by: Abdul Wahab, Noor Izzri, et al.
Published: (2002)
by: Abdul Wahab, Noor Izzri, et al.
Published: (2002)
Mapping of optimum placement of distributed generation in meshed power networks with appropriate technologies
by: Warid, Warid Sayel, et al.
Published: (2016)
by: Warid, Warid Sayel, et al.
Published: (2016)
A sensitivity based methodology for optimal placement of distributed generation in meshed power systems
by: Warid, Warid Sayel, et al.
Published: (2017)
by: Warid, Warid Sayel, et al.
Published: (2017)
Optimal location and size of distributed generation to reduce power losses based on differential evolution technique
by: Abdul Wahab, Noor Izzri, et al.
Published: (2017)
by: Abdul Wahab, Noor Izzri, et al.
Published: (2017)
Optimal placement and sizing of FACTS devices for optimal power flow using metaheuristic optimizers
by: Mohd Herwan, Sulaiman, et al.
Published: (2022)
by: Mohd Herwan, Sulaiman, et al.
Published: (2022)
Analysis on power outage by using big data analytics
by: Rosfarahanun, Ali, et al.
Published: (2020)
by: Rosfarahanun, Ali, et al.
Published: (2020)
Testing statcom model in IEEE power system network using PSCAD software
by: Mohd Firdaus, Daud
Published: (2008)
by: Mohd Firdaus, Daud
Published: (2008)
Cascaded multilevel inverter based STATCOM with power factor correction feature
by: Law, Kah Haw, et al.
Published: (2011)
by: Law, Kah Haw, et al.
Published: (2011)
Optimal sizing, siting and operation of custom power devices with STATCOM and APLC functions for real-time reactive power and network voltage quality control of smart grid
by: Moghbel, M., et al.
Published: (2018)
by: Moghbel, M., et al.
Published: (2018)
Voltage stability index calculation by hybrid state estimation based on multi objective optimal phasor measurement unit placement
by: Matsukawa, Yoshiaki, et al.
Published: (2019)
by: Matsukawa, Yoshiaki, et al.
Published: (2019)
Improvement of transient stability of power systems with STATCOM-controller using trajectory sensitivity
by: Chatterjee, D., et al.
Published: (2011)
by: Chatterjee, D., et al.
Published: (2011)
Dynamic modeling of power network-integrated wind turbine
by: Awalin, Lilik J., et al.
Published: (2022)
by: Awalin, Lilik J., et al.
Published: (2022)
New line voltage stability index (BVSI) for voltage stability assessment in power system: the comparative studies
by: Ismail, Bazilah, et al.
Published: (2022)
by: Ismail, Bazilah, et al.
Published: (2022)
Computer vision and artificial intelligence (AI)-based ripeness classification of oil palm fruits in oil palm plantations
by: Chong, Wei Han, et al.
Published: (2025)
by: Chong, Wei Han, et al.
Published: (2025)
Wide area monitoring system control management of the IEEE-14 bus system using least square support vector regression
by: Awalin, Lilik Jamilatul, et al.
Published: (2022)
by: Awalin, Lilik Jamilatul, et al.
Published: (2022)
Controlled islanding strategy for power systems based on flexible semi-supervised spectral clustering
by: Azadian, Farshad, et al.
Published: (2013)
by: Azadian, Farshad, et al.
Published: (2013)
Optimal placement and sizing of electric vehicle charging stations on distribution systems for enhanced power system stability
by: Lau, Tiong Kiang
Published: (2024)
by: Lau, Tiong Kiang
Published: (2024)
Optimal placement and sizing of distributed generation based on MVMO-SH
by: N., Md. Saad, et al.
Published: (2018)
by: N., Md. Saad, et al.
Published: (2018)
Index-based placement and distributed generation sizing based on heuristic search
by: N. Z., Mohd Ali, et al.
Published: (2011)
by: N. Z., Mohd Ali, et al.
Published: (2011)
Fuzzy logic controller based three phase shunt active power filter for harmonics reduction
by: Musa, S., et al.
Published: (2014)
by: Musa, S., et al.
Published: (2014)
Testing of statcom model in IEEE 0 bus power system netwotk using PSCAD and MATLAB
by: Siti Nur Baizura, Abu Bakar
Published: (2010)
by: Siti Nur Baizura, Abu Bakar
Published: (2010)
Quantitative frequency security assessment for multi-machine power system based on COI frequency
by: Iessa, Athraa, et al.
Published: (2016)
by: Iessa, Athraa, et al.
Published: (2016)
Coordinated aggregated-based particle swarm optimisation algorithm for congestion management in restructured power market by placement and sizing of unified power flow controller
by: Hajforoosh, S., et al.
Published: (2012)
by: Hajforoosh, S., et al.
Published: (2012)
Power system security enhancement and loss reduction using the SMART power flow controller
by: Salah Eldeen Gasim, M. H., et al.
Published: (2014)
by: Salah Eldeen Gasim, M. H., et al.
Published: (2014)
Ant colony optimization technique in optimal capacitor placement and sizing problem in unbalanced electrical distribution system
by: Yahya, Mohd Ainor, et al.
Published: (2015)
by: Yahya, Mohd Ainor, et al.
Published: (2015)
A Neuro-Sliding Mode Controller for STATCOM
by: Morris, Stella
Published: (2004)
by: Morris, Stella
Published: (2004)
A fuzzy variable structure controller for STATCOM
by: Morris, S
Published: (2003)
by: Morris, S
Published: (2003)
Control of a statcom with supercapacitor energy storage
by: Srithorn, Phinit
Published: (2009)
by: Srithorn, Phinit
Published: (2009)
Development of D-STATCOM for voltage SAG mitigation
by: Masdi, Hendri
Published: (2011)
by: Masdi, Hendri
Published: (2011)
Enhancement of performance and response time of cascaded vsc statcom in the presence of voltage variation and low power factor
by: Mohamad Milood, Mohamad Almelian
Published: (2022)
by: Mohamad Milood, Mohamad Almelian
Published: (2022)
Similar Items
-
Optimal placement of DSTATCOM in distribution network based on load flow and voltage stability indices studies
by: Ismail, Bazilah, et al.
Published: (2017) -
Optimal placement and sizing of multiple STATCOM in distribution system to improve voltage profile
by: Moghbel, Moayed, et al.
Published: (2016) -
Power quality improvement in distribution systems considering Optimum
D-STATCOM placement
by: Farhoodnea, Masoud, et al.
Published: (2013) -
Power Quality Improvement Using Distribution Static Compensator (D-Statcom) On 11 Kv Distribution System
by: Hj.Abdul Wahab, Noor Izzri
Published: (2002) -
Adverse impact of STATCOM on the performance of distance relay
by: Aker, Elhadi Emhemad, et al.
Published: (2017)