In-process surface roughness monitoring based on workpiece surface temperature for turning operations

QR Code

In-process surface roughness monitoring based on workpiece surface temperature for turning operations

As the machining process has been moving to the stage of full automation over the years, one of the fundamental requirements is the ability to accurately predict the output performance and controlling the required surface quality. The focus of present study is to predict and monitor the surface roug...

Full description

Bibliographic Details
Main Author:	Suhail, Adeel H.
Format:	Thesis
Language:	English
Published:	2011
Subjects:	Surface roughness
Online Access:	http://psasir.upm.edu.my/id/eprint/41789/ http://psasir.upm.edu.my/id/eprint/41789/1/FK%202011%2014R.pdf

Similar Items

Optimization of cutting parameters based on surface roughness and assistance of workpiece surface temperature in turning process
by: Suhail, Adeel H., et al.
Published: (2010)

Effects of surface roughness on local friction and temperature distributions in a steel-on-steel fretting contact
by: Qin, W., et al.
Published: (2018)

Workpiece surface temperature for in-process surface roughness prediction using response surface methodology
by: Suhail, Adeel H., et al.
Published: (2011)

Effect of surface roughness on helicopter main rotor blade
by: W. N., W. Rohizan, et al.
Published: (2016)

Surface Roughness Prediction in End Milling of Machinable Glass Ceramic and Optimization By Response Surface Methodology
by: Moola, Mohan Reddy, et al.
Published: (2011)

Effect of tool geometry on dimensional accuracy and surface finish of turned parts
by: Islam, Mohammad Nazrul, et al.
Published: (2013)

Optimization of various cutting parameters on the surface roughness of the machinable glass ceramic with two flute square end mills of micro grain solid carbide
by: Moola, Mohan, et al.
Published: (2012)

Mechanical durability of superhydrophobic surfaces: the role of surface modification technologies
by: Zhi, Jing-Hui, et al.
Published: (2017)

Machining of metal matrix composites: effect of ceramic particles on residual stress, surface roughness and chip formation
by: Pramanik, Alokesh, et al.
Published: (2008)

Effects of surface roughness on thermo-mechanical fatigue life of a P91 power plant steel
by: Kyaw, Si Thu, et al.
Published: (2016)

Applications of the variance orientation transform method to the multiscale characterization of surface roughness and anisotropy
by: Wolski, Marcin, et al.
Published: (2010)

Surface defects in groove milling of Hastelloy-C276 under fluid coolant
by: Al-Falahi, Muath, et al.
Published: (2016)

Correlations Developed for Estimation of Hydraulic Parameters of Rough Fractures Through the Simulation of JRC Flow Channels
by: Rasouli, Vamegh, et al.
Published: (2011)

Influence of cutting parameters on machinable glass ceramic processed by end milling
by: Moola, Mohan Reddy, et al.
Published: (2011)

Optimisation of surface measurement for metal additive manufacturing using coherence scanning interferometry
by: Gomez, Carlos, et al.
Published: (2017)

Development of Cutting Force Model of Aluminum Nitride ceramic processed by Micro End Milling
by: Moola, Mohan Reddy, et al.
Published: (2011)

Optimisation of surface topography characterisation for metal additive manufacturing using coherence scanning interferometry
by: Gómez, Carlos A., et al.
Published: (2017)

Effect of process parameters on surface roughness produced by turning boring operation
by: Mohamed, Ahmad Dzia’Uddin
Published: (2010)

Effect of lubrication condition on surface roughness in turning operation
by: Mohd Zulhilmi, Rifin
Published: (2010)

Application of coolants during tool-based machining – A review
by: Yang, Khor Zheng, et al.
Published: (2023)

Effect of stress relieving heat treatment on surface topography and dimensional accuracy of incrementally formed grade 1 titanium sheet parts
by: Behera, Amar Kumar, et al.
Published: (2016)

Feature-based characterisation of evolving surface topographies in finishing operations for additive manufacturing
by: Newton, Lewis, et al.
Published: (2018)

Synchrotron far-infrared spectroscopy of corroded steel surfaces using a variable angle of incidence
by: Lepkova, Katerina, et al.
Published: (2014)

Study On The Effect Of Tool Nose Wear On Surface Roughness And Dimensional Deviation Of Workpiece In Finish Turning Using Machine Vision.
by: Haghighi, Hamidreza Shahabi
Published: (2008)

Discovering decision algorithm of distance protective relay based on rough set theory and rule quality measure
by: Othman, Mohamad Lutfi
Published: (2011)

Surface characteristics and removal mechanism of cemented tungsten carbides in nanoscratching
by: Sun, H, et al.
Published: (2010)

Surface generation and assessment for peripheral milling
by: Scholz, Frieder, et al.
Published: (2016)

Review on the influence of process parameters in incremental sheet forming
by: Gatea, Shakir, et al.
Published: (2016)

Investigation and modelling prediction on surface roughness of titanium in dry turning operation
by: Elie Sem, Semilin
Published: (2009)

Optimization of cutting parameters on turning process based on surface roughness using response surface methodology
by: Yusuf, Muhammad, et al.
Published: (2012)

Rough sets for mining educational data
by: Johnson, J., et al.
Published: (2012)

Simulations of fluid flow through a porous formation with a single rough fracture plane
by: Rasouli, A., et al.
Published: (2012)

Prediction of surface roughness in turning operation of low carbon steel AISI 1018
by: Fakhrur Razi, Bahrin
Published: (2009)

Towards Improved Infrastructure Design & Construction in Rough Terrain & Inclement Environments
by: Malik, Shariful, et al.
Published: (2012)

Structural and electrical properties of nickel–iron thin film on copper substrate for dynamic random access memory applications
by: Saeed, Ayad, et al.
Published: (2016)

Effects of swelling-clay and surface roughness on the wettability of transitional shale
by: Li, Pei, et al.
Published: (2021)

Influence of cutting parameters on surface roughness for wet and dry turning process.
by: Mohd Ariffin, Mohd Khairol Anuar, et al.
Published: (2011)

Machining of bone: Analysis of cutting force and surface roughness by turning process
by: Noordin, M., et al.
Published: (2015)

Coherence scanning interferometry for additive manufacture
by: Gomez, Carlos, et al.
Published: (2017)

Machinability of Aluminum Nitride Ceramic using TiAlN and TiN Coated Carbide Tool Insert
by: Moola, M., et al.
Published: (2014)