The effect of bentonite clay on green compression strength for tailing sands from old tin mines in Perak state, Malaysia for making green sand casting mould
Clay has an important role in making green sand casting mould beside water. Clay acts as binders, holding the sand grains together. Water is needed to activate the clay bond. Without the addition of water on clay, no strength would be achieved on sand mould, as the sand and clay would be just two dr...
Similar Items
Green compression strength of tin mine tailing sand for green
sand casting mould
by: Abdullah, Azhar, et al.
Published: (2013)
by: Abdullah, Azhar, et al.
Published: (2013)
Mechanical properties of tin tailing sand-clay mixture from Batu Gajah, Perak, Malaysia for making greensand casting mould
by: Abdullah, Azhar, et al.
Published: (2014)
by: Abdullah, Azhar, et al.
Published: (2014)
Mechanical properties of tin mine tailing sand for greensand casting mould
by: Abdullah, Azhar
Published: (2012)
by: Abdullah, Azhar
Published: (2012)
Effect of moisture content on the permeability of tailing sand samples gathered from ex tin mines in Perak state Malaysia
by: Abdullah, Azhar, et al.
Published: (2011)
by: Abdullah, Azhar, et al.
Published: (2011)
Mechanical moulding properties of tailing sand-clay mixture from Batu Gajah, Perak, Malaysia
by: Abdullah, Azhar, et al.
Published: (2012)
by: Abdullah, Azhar, et al.
Published: (2012)
The effect of sand grain size and water on the green compression strength for greensand casting mould mixture
by: A.Azhar,, et al.
Published: (2022)
by: A.Azhar,, et al.
Published: (2022)
Influence of mechanical vibration moulding process on the tensile properties of TiC reinforced LM6 alloy composite castings
by: M. Sayuti, et al.
Published: (2011)
by: M. Sayuti, et al.
Published: (2011)
Investigation on different compositions of clay and water to the permeability of the silica sand used in greensand casting mould
by: A. Azhar,, et al.
Published: (2022)
by: A. Azhar,, et al.
Published: (2022)
Advances in Squeeze Casting Technique for Processing Discontinuous Ceramic Fibre Reinforced Metal Matrix Composite Materials
by: Vijayaram, Thoguluva Raghavan
Published: (2006)
by: Vijayaram, Thoguluva Raghavan
Published: (2006)
Thermal analysis of two and three-gate sand casting mould
by: Lim, Alex Kheng Booi
Published: (2001)
by: Lim, Alex Kheng Booi
Published: (2001)
The influence of mechanical vibration moulding process on thermal conductivity and diffusivity of Al-TiC particulate reinforced composites
by: Mohd Sayuti,, et al.
Published: (2011)
by: Mohd Sayuti,, et al.
Published: (2011)
Effect of quartz-silicon dioxide particulate on tensile properties of aluminium alloy cast composites
by: M. Sayuti, et al.
Published: (2011)
by: M. Sayuti, et al.
Published: (2011)
Modification of soil structure of sand tailings: 2. effect of silt, sand and clay contents on aggregate development using organic amendments
by: A. M., Mokhtarudin, et al.
Published: (1996)
by: A. M., Mokhtarudin, et al.
Published: (1996)
Effect of flyash on liquefaction behaviour of sand-bentonite mixture
by: Keramatikerman, M., et al.
Published: (2018)
by: Keramatikerman, M., et al.
Published: (2018)
Experimental investigation on breakdown characteristics of sand, bentonite and their mixes
by: Sabry, Riyadh Zaki, et al.
Published: (2018)
by: Sabry, Riyadh Zaki, et al.
Published: (2018)
Prediction of heat flow through sand mould and its verification on the structure and property of gray cast iron
by: Shah, Sugrib Kumer, et al.
Published: (2010)
by: Shah, Sugrib Kumer, et al.
Published: (2010)
Properties of Metal Matrix Composite of Aluminium 11.8% Silicon Reinforced with Different Particulates
by: Vijayaram, Thoguluva Raghavan
Published: (2006)
by: Vijayaram, Thoguluva Raghavan
Published: (2006)
Static liquefaction of very loose sand-slag-bentonite mixtures
by: Sabbar, A., et al.
Published: (2016)
by: Sabbar, A., et al.
Published: (2016)
Strength characteristic of bentonite and kaolin with and without thermal mixed with sand
by: Nur Syahirah Adiba , Jamsus
Published: (2012)
by: Nur Syahirah Adiba , Jamsus
Published: (2012)
Effect of lime treatment on static liquefaction behavior of sand-bentonite mixtures
by: Keramatikerman, M., et al.
Published: (2018)
by: Keramatikerman, M., et al.
Published: (2018)
Investigation microstructure and mechanical properties of white cast iron using sand casting
by: Muhammad Saiful Azzam, Hamdan
Published: (2011)
by: Muhammad Saiful Azzam, Hamdan
Published: (2011)
Parametric optimizing green sand-casting process parameters using hybrid Taguchi grey relational analyses and principal component analyses
by: Vora, Manish J.
Published: (2023)
by: Vora, Manish J.
Published: (2023)
Remediation of contaminated marine sediment using bentonite, kaolin and sand as capping materials
by: Kabir Aliyu, Mohammed
Published: (2019)
by: Kabir Aliyu, Mohammed
Published: (2019)
An investigation into the effect of backup coat sands on investment casting products
by: Kaila, Vishal N, et al.
Published: (2022)
by: Kaila, Vishal N, et al.
Published: (2022)
Effect of melting temperature on dimensional accuracy in sand casting product
by: Ahmad Faizal, Mohamad
Published: (2009)
by: Ahmad Faizal, Mohamad
Published: (2009)
Development of automotive sand casting product (cast iron) with CAE/casting simulation assist / Anizan Hamad @ Ahmad.
by: Hamad @ Ahmad, Anizan
Published: (2009)
by: Hamad @ Ahmad, Anizan
Published: (2009)
Electrical Formation Factor of Beach Sands and Clay-sand Mixtures from Experimental and Digital Rock Physics
by: Garba, Mohammed Ali
Published: (2017)
by: Garba, Mohammed Ali
Published: (2017)
Microwave processing of oil sands and contribution of clay minerals
by: Robinson, John P., et al.
Published: (2014)
by: Robinson, John P., et al.
Published: (2014)
Evaluation of physical properties of clays mixed with silica sand
by: Akbar Firoozi, A., et al.
Published: (2014)
by: Akbar Firoozi, A., et al.
Published: (2014)
Effects of mulching and fertilizer on nutrient dynamics of sand tailings growth with acacia hybrid.
by: Abu Bakar, Rosenani, et al.
Published: (2011)
by: Abu Bakar, Rosenani, et al.
Published: (2011)
Stabilization of silty sand using bentonite magnesium-alkalinization: Mechanical, physicochemical and microstructural characterization
by: Nurmunira, Muhammad, et al.
Published: (2019)
by: Nurmunira, Muhammad, et al.
Published: (2019)
A study on mold material and coating effect in sand casting process
by: Muhammad Fakhri, Zainuddin
Published: (2009)
by: Muhammad Fakhri, Zainuddin
Published: (2009)
A new unified constitutive model for natural clay and sand
by: AL-Sarri, Hussein A. H.
Published: (2019)
by: AL-Sarri, Hussein A. H.
Published: (2019)
In situ remediation of lead contaminated marine sediment using bentonite, kaolin and sand as capping materials
by: Kabir Aliyu, Mohammed, et al.
by: Kabir Aliyu, Mohammed, et al.
Thermal investigation of aluminium - 11.8% silicon (LM6) reinforced SiO2 - particles
by: Mohd Sayuti,, et al.
Published: (2011)
by: Mohd Sayuti,, et al.
Published: (2011)
Mechanical properties of particulate reinforced aluminium alloy matrix composite
by: Mohd Sayuti,, et al.
Published: (2010)
by: Mohd Sayuti,, et al.
Published: (2010)
Investigation mechanical properties and microstructure of aluminium silicon alloy using sand casting
by: Wong, Yin Ying
Published: (2010)
by: Wong, Yin Ying
Published: (2010)
Effect of tin mining waste as sand replacement on flowability and compressive strength of mortar
by: Noraziah, Ahmad, et al.
Published: (2024)
by: Noraziah, Ahmad, et al.
Published: (2024)
Sand
by: Drewe, R., et al.
Published: (2010)
by: Drewe, R., et al.
Published: (2010)
Installation of caisson in non-uniform clay interbedded with a sand layer
by: Zhou, Shujin, et al.
Published: (2021)
by: Zhou, Shujin, et al.
Published: (2021)
Similar Items
-
Green compression strength of tin mine tailing sand for green
sand casting mould
by: Abdullah, Azhar, et al.
Published: (2013) -
Mechanical properties of tin tailing sand-clay mixture from Batu Gajah, Perak, Malaysia for making greensand casting mould
by: Abdullah, Azhar, et al.
Published: (2014) -
Mechanical properties of tin mine tailing sand for greensand casting mould
by: Abdullah, Azhar
Published: (2012) -
Effect of moisture content on the permeability of tailing sand samples gathered from ex tin mines in Perak state Malaysia
by: Abdullah, Azhar, et al.
Published: (2011) -
Mechanical moulding properties of tailing sand-clay mixture from Batu Gajah, Perak, Malaysia
by: Abdullah, Azhar, et al.
Published: (2012)