Preparation and characterisation of water-soluble phytosterol nanodispersions.
The purpose of this study was to prepare and characterise water-soluble phytosterol nanodispersions for food formulation. The effects of several factors were examined: four different types of organic phases (hexane, isopropyl alcohol, ethanol and acetone), the organic to aqueous phase ratio and conv...
| Main Authors: | , , , , , |
|---|---|
| Format: | Article |
| Language: | English English |
| Published: |
Elsevier
2011
|
| Online Access: | http://psasir.upm.edu.my/id/eprint/22295/ http://psasir.upm.edu.my/id/eprint/22295/1/Preparation%20and%20characterisation%20of%20water.pdf |
| Summary: | The purpose of this study was to prepare and characterise water-soluble phytosterol nanodispersions for food formulation. The effects of several factors were examined: four different types of organic phases (hexane, isopropyl alcohol, ethanol and acetone), the organic to aqueous phase ratio and conventional homogenisation vs. high-pressure homogenisation. We demonstrated the feasibility of phytosterol nanodispersions production using an emulsification–evaporation technique. The results showed that hexane was able to produce the smallest particle size at a mean diameter of approximately 50 nm at monomodal distribution. Phytosterol nanodispersions prepared with a higher homogenisation pressure and a higher organic to aqueous phase ratio resulted in significantly larger phytosterol nanoparticles (P < 0.05). Phytosterol loss after high-pressure homogenisation ranged from 3% to 28%, and losses increased with increasing homogenisation pressure. Elimination of the organic phase by evaporation resulted in a phytosterol loss of 0.5–9%. |
|---|