Development and characterization of screen‑printed Prosopis africana char thick film for electronic applications
The need for biomass materials that are both cost-efective and highly efective has increased rapidly in a number of areas, including fexible electronics. The aim of this research is to investigate the properties of a screen-printed thick flm of Prosopis Africana charcoal (PAC) on an alumina substrat...
| Main Authors: | , , , , , , , , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Springer
2024
|
| Online Access: | http://psasir.upm.edu.my/id/eprint/120368/ http://psasir.upm.edu.my/id/eprint/120368/1/120368.pdf |
| Summary: | The need for biomass materials that are both cost-efective and highly efective has increased rapidly in a number of areas, including fexible electronics. The aim of this research is to investigate the properties of a screen-printed thick flm of Prosopis Africana charcoal (PAC) on an alumina substrate. The biochar was obtained from the Prosopis Africana strain by subjecting it to controlled pyrolysis at 500 °C for 3 h. The rheological properties of the PAC pastes were formulated at a powder-toorganic binder ratio of 40:60 wt%. An average 11.8-µm-thick layer was produced using the screen-printing process. X-ray difraction analysis showed the presence of characteristic peaks at approximately 25.0° and 44.7°. These peaks correspond to the (002) and (004) refections of the graphite structure. Thermogravimetric analysis revealed that the PAC flm exhibited thermal stability in an airfow environment up to 650 °C. The surface morphology of the PAC thick flm exhibits a reticulated appearance with patchy features, while elemental composition analysis (EDX) confrmed the high carbon content of the PAC thick flm. The real and imaginary dielectric constants of the PAC thick flm at 10 GHz were found to be 9.8 and 1.8, respectively. It can be concluded that the PAC biochar has promising electronic properties, making it a suitable candidate as an environmentally friendly material for a range of electronic applications. |
|---|