The effect of heat treatment on hardness properties and microstructure of 9Cr-Mo-V T91 alloy steel

QR Code

The effect of heat treatment on hardness properties and microstructure of 9Cr-Mo-V T91 alloy steel

The effect of heat treatment on hardness properties and microstructure of 9Cr-Mo-V T91 alloy steel have been investigated. In this study, T91 alloy steel were austenitized at 1050 °C for 40 minutes and then quenched in different media such as forced air, air at room temperature, sand and...

Full description

Bibliographic Details
Main Authors:	Jaafar, Che Nor Aiza, Saleh, Mat Husin, Noraslan, Nurul Zawanah, Zainol, Ismail, Md Rezali, Khairil Anas, Anene, Franklin, Dele-Afolabi, Temitope Theophilus
Format:	Article
Published:	Universiti Putra Malaysia 2022
Online Access:	http://psasir.upm.edu.my/id/eprint/103508/

Similar Items

Intermetallics evolution and shear strength of carbon nanotubes- reinforced sn-5sb solder on copper board
by: Dele-Afolabi, Temitope Theophilus
Published: (2015)

Experimental and numerical investigation of plain and Ni-reinforced porous alumina ceramics composites produced with agro-waste pore formers
by: Theophilus, Dele-Afolabi Temitope
Published: (2018)

An analysis on the effect of surface morphology, microstructure and hardness of friction stir processed Mg AZ91
by: Zuhairah, Zulkfli
Published: (2023)

Microstructures and properties of CoCrMo alloy by metal injection moulding process
by: Nur Aidah Nabihah, Dandang
Published: (2019)

Microstructure and hardness properties of aluminum matrix composites reinforced with iron (iii) oxide nanoparticles and carbon nanotubes
by: Hanim, M.A. Azmah, et al.
Published: (2022)

Influence of multi-walled carbon nanotubes on melting temperature and microstructural evolution of Pb-free Sn-5Sb/Cu solder joint
by: Theophilus, Dele-Afolabi Temitope, et al.
Published: (2015)

Creep and microstructural development in P91 weldments at elevated temperature
by: Agyakwa, Pearl
Published: (2004)

Alloying behaviour and microstructural changes of a Ti-10%Mo-10%Cr alloy on sintering process
by: Junaidi Syarif,, et al.
Published: (2018)

Effect of Sintering Temperature on Physical Properties & hardness of CoCrMo alloys fabricated by metal injection moulding process
by: Ahmad Ridwan, Abdullah, et al.
Published: (2017)

Changes in microstructure and mechanical properties of P91 weld metal during creep
by: Zhang, Yan
Published: (2009)

Effects of heat treatment on the hardness properties and microstructure of Al-6505 alloy
by: Jaafar, Che Nor Aiza, et al.
Published: (2021)

Structuralvariations in thespike glycoproteinof M41 and CR88 (4/91) avian infectious bronchitis viruses
by: Bande, Faruku, et al.
Published: (2015)

Microstructural stability of a nickel-based alloy overlay on a 2.25Cr1Mo steel substrate
by: Saghafifar, Hassan
Published: (2011)

A comparison of the galling wear behaviour of PVD Cr and electroplated hard Cr thin films
by: Daure, J.L., et al.
Published: (2018)

Microstructural Evolution and Phase Transformation in Laser Cladding of Cr and Mo Powder on Grey Cast Iron: Mixture Design of Experiment (DOE)
by: Abd Rahman, Zulhishamuddin, et al.
Published: (2017)

Significant effect of rice husk and sugarcane bagasse pore formers on the microstructure and mechanical properties of porous Al2O3/Ni composites
by: Temitope T., Dele-Afolabi, et al.
Published: (2018)

Research trend in the development of macroporous ceramic components by pore forming additives from natural organic matters: a short review
by: Dele-Afolabi, Temitope Theophilus, et al.
Published: (2017)

Research trend in the processing and application of macroporous ceramic components
by: Dele-Afolabi, Temitope Theophilus, et al.
Published: (2017)

Controlling the sintering response in the development of multilayered components produced via powder injection molding route—a review
by: Ojo-Kupoluyi, Oluwatosin Job, et al.
Published: (2020)

Effect of Holding Temperature to Bainite Transformation in Cr Mo Steel
by: M., Sarizam, et al.
Published: (2013)

Microstructure, phase formation and hardness investigation of argon arc melted Al-Co-Cr-Fe-Ni and Al-Cu-Cr-Fe-Ni Highentropy Alloys (HEA) with elemental additions / Rafidah Razuan
by: Razuan, Rafidah
Published: (2017)

Microstructural and shear strength properties of RHA-reinforced Sn–0.7Cu composite solder joints on bare Cu and ENIAg surface finish
by: Mohamed Ariff, Azmah Hanim, et al.
Published: (2020)

Characterisation of plasma-sprayed fish scale hydroxyapatite/yttria stabilized zirconia bioceramic on titanium alloys for medical implants
by: Anene, Franklin Amaechi
Published: (2022)

Temporary sound barrier system from natural fiber polymeric composite
by: Hanim Mohamed Ariff, Azmah, et al.
Published: (2023)

The influence of friction stir welding of dissimilar AZ31 and AZ91 magnesium alloys on the microstructure and tensile properties
by: N. S., Mohamed, et al.
Published: (2019)

The Effects of Oxide Layer on Co-Cr-Mo: Preliminary Study In-vitro
by: Mas Ayu, Hassan, et al.
Published: (2015)

Factors affecting the quality of technical processes training
by: Jaafar, Che Nor Aiza, et al.
Published: (2021)

Investigation on the microstructure development and corrosion performance of friction stir welded dissimilar AZ31/AZ91 magnesium alloys
by: Nurul Shuhada, Haji Mohamed
Published: (2020)

Influence of KCl and HCl on high temperature corrosion of HVAF-sprayed NiCrAlY and NiCrMo coatings
by: Sadeghimeresht, Esmaeil, et al.
Published: (2018)

In-vitro biocompatibility study of hydroxyapatite coated on Co-Cr-Mo with oxide interlayer
by: Mas Ayu, Hassan, et al.
Published: (2018)

Agro-waste shaped porous Al2O3/Ni composites: corrosion resistance performance and artificial neural network modelling
by: Mohamed Ariff, Azmah Hanim, et al.
Published: (2018)

Tensile strength and corrosion resistance properties of porous Al2O3/Ni composites prepared with rice husk pore-forming agent
by: Dele-Afolabi, Temitope Theophilus, et al.
Published: (2018)

Mo (VI) reduction to molybdenum blue by Serratia marcescens strain Dr. Y9.
by: Abd. Shukor, Mohd. Yunus, et al.
Published: (2009)

Schottky's barrier height of T91/Cr2O3 heterojunction in dry and wet conditions: effects of watervapor onto accelerated high temperature oxidation
by: Ani, Mohd Hanafi, et al.
Published: (2018)

Investigation on microstructure and hardness of nickel-alumina functionally graded material
by: S. N. S., Jamaludin, et al.
Published: (2020)

Interfacial microstructure evolution and shear strength of MWCNTs-reinforced Sn-1.0Ag-0.5Cu (SAC105) composite solder interconnects on plain Cu and ENIAg surface finish
by: Dele-Afolabi, Temitope T., et al.
Published: (2022)

Effects of hydroxyapatite coating with oxide interlayer on bioactivity performances in CoCrMo alloy
by: Mas Ayu, Hassan
Published: (2015)

Surface composition, adhesion strength and biocompatibility activity of CoCrMo-Hydroxyapatite composite
by: Nurul Akmal, Che Lah, et al.
Published: (2025)

Surface Modification on CoCrMo Alloy to Improve the Adhesion Strength of Hydroxyapatite Coating
by: Mas Ayu, Hassan, et al.
Published: (2017)

Nano-structured diamond & silica coatings on CO-CR-MO substrate for biomedical application
by: Kumaran, Kadirgama, et al.