Mechanical performance and corrosion behaviour of diffusion-bonded A5083 aluminium and A36 mild steel with gallium interlayer

QR Code

Mechanical performance and corrosion behaviour of diffusion-bonded A5083 aluminium and A36 mild steel with gallium interlayer

This article investigated the mechanical performance and corrosion behaviour of a diffusion-bonded A5083 aluminium/A36 mild steel dissimilar joint with a Gallium (Ga) interlayer. The bonding parameters were the bonding temperature (525 and 550 °C), holding time (60 and 120 min) and surface roughness...

Full description

Bibliographic Details
Main Authors:	Ismail, Asmawi, Othman, Nurul Husna, Mustapha, Mazli, Mohamed Saheed, Mohamed Shuaib, Abdullah, Zaki, Muhammed, Musa, Mohamed Saat, Asmalina, Mustapha, Faizal
Format:	Article
Published:	Multidisciplinary Digital Publishing Institute 2022
Online Access:	http://psasir.upm.edu.my/id/eprint/102155/

Similar Items

Fe-Al Diffusion Bonding: Effect of reaction time on the interlayer thickness / Asmawi Ismail...[et al.]
by: Ismail, Asmawi, et al.
Published: (2018)

Microscopic study of 5083-H321 aluminium alloy under fretting fatigue condition
by: Eslamian, Saeed, et al.
Published: (2011)

Microscopic Study of 5083-H321 Aluminium Alloy Under Fretting Fatigue Condition
by: Eslamian, Saeed
Published: (2005)

Characterization of intermetallic particles in aluminium alloy AA5083 series after recrystalization heat treatment
by: Peter, Octovia
Published: (2007)

Information for the Malaysian Asphalt Industry towards better pavement interlayer bonding
by: Haryati Yaacob,, et al.
Published: (2014)

Experimental Investigation Of EDM Die Sinking Process Parameters On Aluminium Alloy 5083 Using Design Of Experiment
by: Wahaizad, Safiei, et al.
Published: (2017)

Ultrasensitive aptasensor using electrospun MXene/polyvinylidene fluoride nanofiber composite for Ochratoxin A detection
by: Al Dhahebi, Adel Mohammed, et al.
Published: (2022)

Synthesis and characterization of partially phosphorylated poly (Vinyl Alcohol) – aluminum phosphate (PPVA – AlPO4) nanocomposite / Asmalina Mohamed Saat
by: Asmalina, Mohamed Saat
Published: (2016)

The Microstructure of Aluminum A5083 Butt Joint by Friction Stir Welding
by: M., Ishak, et al.
Published: (2015)

Antioxidants activity in pineapple CV. N36 culture under aluminium stress
by: Aziz, A., et al.
Published: (2012)

Comparison studies of machinability for aluminium, mild steel and heat treated mild steel
by: Faiz Asyraf, Roslan
Published: (2008)

Preliminary study on the fabrication of aluminium foam through pressure assisted sintering dissolution process
by: Mustapha, Mazli, et al.
Published: (2010)

Growth of Gallium Nitride (GaN) on Aluminium Nitride Surfaces Grown by Electron-Beam Evaporator
by: Fikri, Z. M., et al.
Published: (2015)

High yield of isosorbide production from sorbitol dehydration catalysed by Amberlyst 36 under mild condition
by: Muhammad Ridzuan, Kamaruzaman, et al.
Published: (2020)

Mechanical behaviour of stress absorbing membrane interlayers
by: Ogundipe, Olumide Moses
Published: (2012)

Gallium nitride nanowires
by: Stampfl, C., et al.
Published: (2010)

Preliminary study on the fabrication of aluminium foam through pressure assisted sintering dissolution process
by: Mustapha, Faizal, et al.
Published: (2010)

Effects on hybridization of interlayer composites and self-reinforced polypropylene
by: M. I., Ibrahim, et al.
Published: (2023)

Study of welding on aluminum alloy 5083 / Mohd Noor Ariff Muhammad and Mohamad Nor Azuan Mohamad
by: Muhammad, Mohd Noor Ariff, et al.
Published: (2002)

Numerical analysis of shock wave propagation and AL5083 sheet bulging in explosive hydro forming process
by: Jabalamelian, Saeed
Published: (2012)

Friction Stir Welding Of Cryorolled Al 5083 Alloy Optimization Of Process Parameters Using Taguchi Technique
by: Anuar, Muhammad Firdaus
Published: (2019)

Effects Of Intermetallic Growth And Bonding Parameters On Wire- Bond Strength For Gold - Aluminium System
by: Chan, Sook Chien
Published: (2002)

A study of interlayer gallery of modified sodium montmorillonite (MMT) nanofiller using ion exchange and surfactant method
by: Mohamad Faiz, Mohamed Yatim
Published: (2012)

The mechanical properties of ionoplast interlayer material at high strain rates
by: Zhang, X., et al.
Published: (2015)

Design of heavy-duty pavements incorporating a granular interlayer
by: Ahmed, Imtiaz
Published: (2020)

Electron scattering from atomic gallium
by: Fursa, Dmitry, et al.
Published: (2009)

Adjustable current-induced magnetization switching utilizing interlayer exchange coupling
by: Sheng, Yu, et al.
Published: (2018)

Influence of drop weight geometry and interlayer on impact behavior of RC beams
by: Li, H., et al.
Published: (2019)

Hydroxyapatite coating with oxide interlayer on biomedical grade cobalt based alloy
by: Mas Ayu, H.
Published: (2017)

Study of Few Layer Graphene Synthesised by Interlayer Catalytic Exfoliation Method
by: Chen, Tong Yang
Published: (2019)

Performance of uncoated cutting tools when machining mild steel and aluminium alloy
by: Mohd Fahmi, Md Yusuf
Published: (2010)

Single longitudinal mode fiber laser with integration of gallium-erbium co-doped fiber
by: Mohamed Halip, Nor Hafizah
Published: (2016)

Majlis Konvokesyen ke - 36
by: Harian Metro,
Published: (2012)

Majlis Konvokesyen ke-36
by: Universiti Putra Malaysia
Published: (2012)

Performance of coated carbide cutting tool while machining aluminium alloy and mild steel
by: Ismail, Ab.llah
Published: (2010)

Effect of aluminium oxide and silicon carbide abrasive type on mild steel surface temperature
by: Mohd Hizam, Mohd Noor
Published: (2010)

Effect of Loading Rate on Fracture Toughness Measurement of 7010 Aluminium Alloy and Mild Steel
by: Talib, Jamilah
Published: (2004)

Composition modification of electroplated nickel interlayer on tungsten carbide substrate by thermal carburizing
by: Wahab, H., et al.
Published: (2014)

Influence of Microwave and Conventional Annealing Processes in Improving an Electrodeposited Nickel Interlayer Characteristics
by: Hassan, A., et al.
Published: (2016)

In-vitro biocompatibility study of hydroxyapatite coated on Co-Cr-Mo with oxide interlayer
by: Mas Ayu, Hassan, et al.
Published: (2018)