Excess Mg in situ powder addition for enhancing critical current density of ex situ MgB2

In this work, ex situ MgB2 bulks were added with (1.5 Mg + 2B) and sintered in an attempt to enhance its intergrain connectivity. The addition was varied within the range of 0–50 wt.%, and the sintering was undertaken at 700 °C, 800 °C, and 1000 °C, respectively, for 1 h. Superconducting critical te...

Full description

Bibliographic Details
Main Authors: Mohd Hapipi, Nurhidayah, Chen, Soo Kien, Shaari, Abdul Halim, Awang Kechik, Mohd Mustafa, Lim, Kean Pah, Tan, Kar Ban, Lee, Oon Jew, Miryala, Muralidhar
Format: Article
Published: Springer 2022
Online Access:http://psasir.upm.edu.my/id/eprint/101366/
Description
Summary:In this work, ex situ MgB2 bulks were added with (1.5 Mg + 2B) and sintered in an attempt to enhance its intergrain connectivity. The addition was varied within the range of 0–50 wt.%, and the sintering was undertaken at 700 °C, 800 °C, and 1000 °C, respectively, for 1 h. Superconducting critical temperature, Tc of the samples was determined to be around 38 K as shown by the temperature dependence of susceptibility measurement. It was found that critical current density, Jc increased with the increased amount of the addition. Jc was further enhanced to 2 × 104A cm2 (0 T, 20 K) as the sintering temperature was raised. The increase of Jc is due to improved grain coupling as a result of in situ formation of MgB2, which fills the voids and connects the ex situ MgB2 grains. Additionally, the grain coupling was further strengthened by solid-state self-sintering at higher temperatures. The increment of Jc was accompanied by a narrower width of double-step transition of Tc attributable to a more complete MgB2 phase formation of the samples as the sintering temperature was increased.