Effects of ECAR process on the mechanical properties of explosively welded Al/ Cu/Al

QR Code

Effects of ECAR process on the mechanical properties of explosively welded Al/ Cu/Al

Equal channel angular rolling (ECAR) is a severe plastic deformation method that coated plastic deformation of sheets. This research aims to analyse the effects of equal channel angular rolling feeding routes and the number of passes on the mechanical properties of explosive-welded Al/Cu/Al multilay...

Full description

Bibliographic Details
Main Authors:	Ghaffari, Sina, Tahir, Suraya, Mohamed Ariff, Azmah Hanim, Ismail, M. I. S.
Format:	Article
Published:	Taylor Francis 2022
Online Access:	http://psasir.upm.edu.my/id/eprint/101169/

Similar Items

Wear properties of metal matrix composites Al-Cu and Al-Cu-TiB2
by: Ramli, Rosmamuhamadani, et al.
Published: (2015)

The role of tool offset on the microstructure and mechanical properties of Al/Cu friction stir welded joints
by: Hou, Wentao, et al.
Published: (2020)

The Effect of Welding Process Parameter on Temperature and Residual Stress in Butt-Joint Weld of Robotic Gas Metal Arc Welding.
by: Abdul Aziz, Nuraini, et al.
Published: (2013)

Stability Analysis of Mine Drift for Explosive Welding
by: Jang, Hyong Doo, et al.
Published: (2010)

Mechanical and microstructure characterization of aluminium-copper (Al-Cu) reinforced with in situ titanium diboride (TiB2)
by: Ramli, Rosmamuhamadani, et al.
Published: (2016)

Mechanical properties of laser beam welded Ti6Al4V
by: Fan, Yu
Published: (2010)

Role of mechanical alloying parameters on powders distribution of Al/Cu alloy and Al/Cu composite
by: Jamal, N. A., et al.
Published: (2014)

Investigation of mechanical properties of aluminium-steel welding using different welding technique and processes
by: Mohd Sani, Idris
Published: (2013)

Corrosion characterisation of Al-Cu reinforced in-situ TiB2
by: Ramli, Rosmamuhamadani, et al.
Published: (2016)

The effects of welding parameters on butt joints using robotic gas metal arc welding
by: Abdul Aziz, Nuraini, et al.
Published: (2014)

Occupational Therapy in HomEcare Re-ablement Services (OTHERS): results of a feasibility randomised controlled trial
by: Whitehead, Phillip J., et al.
Published: (2016)

Occupational therapy in HomEcare Re-ablement Services (OTHERS): study protocol for a randomized controlled trial
by: Whitehead, Phillip J., et al.
Published: (2014)

Effect of welding parameters on mechanical properties of welded carbon steel
by: Muhammad Qaidir, Abdillah
Published: (2012)

Rice husk ash reinforcement in alumina : a review on mechanical and microstructural properties
by: Mohd Najib, Mohamad Aznan, et al.
Published: (2015)

The effect of the rheocast process on the microstructure and mechanical properties of Al-5.7Si-2Cu-0.3Mg alloy
by: Abdelgnei, Mnel A H, et al.
Published: (2019)

Strength-ductility synergy in dissimilar friction stir welded Al-Cu joints via introducing pin eccentricity
by: Hou, Wentao, et al.
Published: (2025)

Effect of wobbling loops with laser welding characteristics to the shear strength of cu/al lap joints for battery applications
by: M. N., Jamaludin, et al.
Published: (2024)

Numerical analysis of shock wave propagation and AL5083 sheet bulging in explosive hydro forming process
by: Jabalamelian, Saeed
Published: (2012)

Study of Mechanical Properties on Thick Titanium Alloy (Ti - 6Al- 4V) Multi-Passes Weld
by: Ahmed, Yassin Mustafa, et al.
Published: (2015)

Potential enhancement in mechanical and physical properties of Sn-Ag-Cu lead free solder as a replacement material for Sn-Pb in electronic packaging
by: Mat Hussin, Nur Liyana, et al.
Published: (2015)

Tensile properties and strain response of Cu-Al Bi-metal tube
by: Baghdadi, A.H., et al.
Published: (2014)

Mechanical and structural properties of the butt welded joint in high strength structural steel (ST52-3) using gas metal arc welding and oxyfuel gas welding
by: Ariff, Tasnim Firdaus, et al.
Published: (2020)

The role of pin eccentricity in friction stir welding of Al‑Mg‑Si alloy sheets : microstructural evolution and mechanical properties
by: Hou, Wentao, et al.
Published: (2022)

Occurrence, characterization, and transport mechanism of welding fumes particles emitted during the welding process
by: Norhidayah, Abdull, et al.
Published: (2024)

Investigation of mechanical properties of welded aluminium alloys
by: Addy Firdaus, Omar
Published: (2012)

Significant effect of rice husk and sugarcane bagasse pore formers on the microstructure and mechanical properties of porous Al2O3/Ni composites
by: Temitope T., Dele-Afolabi, et al.
Published: (2018)

Nanoindentation analysis of friction stir welded 6061-T6 Al alloy in as-weld and post weld heat treatment
by: Fadaeifard, Firouz, et al.
Published: (2019)

An overview of explosion severity on dust explosion
by: W. Z., Wan Sulaiman, et al.
Published: (2011)

Weld strength and cracking susceptibility analysis of pulsed TIG welded Al-Mg-Si alloy by experimental approach
by: Kikani, Pratik T., et al.
Published: (2022)

The influence of post weld heat treatment precipitation on duplex stainless steels weld overlay towards pitting corrosion
by: Sim, Bernard Maxmillan, et al.
Published: (2019)

Microhardness characteristics of AL-6063 alloy processed by equal channel angular extrusion
by: Nemati, Jamshid, et al.
Published: (2014)

Mechanical properties of WC-based hardmetals bonded with iron alloys: a review
by: Ojo-Kupoluyi, Oluwatosin Job, et al.
Published: (2017)

Microstructural and shear strength properties of RHA-reinforced Sn–0.7Cu composite solder joints on bare Cu and ENIAg surface finish
by: Mohamed Ariff, Azmah Hanim, et al.
Published: (2020)

Effect of copper and magnesium on the precipitation characteristics of Al-Li-Mg, Al-Li-Cu and Al-Li-Cu-Mg alloys
by: Katsikis, Spyros
Published: (2001)

Microstructural characteristics and mechanical properties of Sn-Ag-Cu solders with minor additions of Al and Zn / Leong Yee Mei
by: Leong , Yee Mei
Published: (2020)

Bismuth addition in Sn-Ag-Cu lead-free solder
by: Mohamed Ariff, Azmah Hanim, et al.
Published: (2024)

Effect of electrodeposited Cu-Ni layer on interfacial reaction and mechanical properties of laser welded-brazed Mg/Ti joints / Auwal Shamsu Tukur
by: Auwal , Shamsu Tukur
Published: (2019)

Modified explosive diagram for determining gas-mixture explosibility
by: Cheng, Jianwei, et al.
Published: (2013)

Influence of multi-walled carbon nanotubes on melting temperature and microstructural evolution of Pb-free Sn-5Sb/Cu solder joint
by: Theophilus, Dele-Afolabi Temitope, et al.
Published: (2015)

Mechanical and physical properties of micro alumina reinforced direct recycled AA6061 chips based matrix by hot extrusion process
by: Sabbar, H. M., et al.
Published: (2020)