Machinability and tribological investigation of nano-hybrid cryogenic-MQL during milling Ti-6Al-4V alloy

QR Code

Machinability and tribological investigation of nano-hybrid cryogenic-MQL during milling Ti-6Al-4V alloy

This paper examines the end milling of Ti-6Al-4V alloy using a nano-hybrid cryogenic-minimum quantity lubricant (MQL) cooling system, focusing on tribology, tool wear, tool life, and surface roughness. Experiments were conducted at cutting speeds of 130 and 150 m/min, feed rates of 0.2 and 0.5 mm/re...

Full description

Bibliographic Details
Main Author:	Musfirah, Abdul Hadi
Format:	Article
Language:	English
Published:	Malaysian Tribology Society (MYTRIBOS) 2025
Subjects:	TJ Mechanical engineering and machinery
Online Access:	http://umpir.ump.edu.my/id/eprint/44599/ http://umpir.ump.edu.my/id/eprint/44599/1/JT-44-67-82%20Machinability%20and%20tribological%20investigation%20of%20nano-hybrid%20cryogenic-.pdf

Similar Items

Machinability and tribological investigation of nano-hybrid cryogenicMQL during milling Ti-6Al-4V alloy
by: Musfirah, Abdul Hadi
Published: (2025)

Study of tool wear progression using nano-hybrid Cryogenic MQL in milling titanium alloy
by: Nurul Dayana, Mohd Noor, et al.
Published: (2023)

Optimization of cutting parameter for machining Ti-6Al-4V titanium alloy
by: Noor Danish, N. H. D., et al.
Published: (2022)

Effect of dry and MQL cutting condition on coated carbide cutting tool during the end milling of Ti-6Al-4V titanium alloy
by: Aiman Nazrin, Noor Ismail, et al.
Published: (2024)

Investigation of tool wear and surface integrity on MQL machining of Ti-6AL-4V using biodegradable oil
by: Rahim, E. A., et al.
Published: (2011)

Machinability improvement in end milling of Titanium Alloy Ti-6Al-4V through preheating
by: Amin, A. K. M. Nurul, et al.
Published: (2011)

High speed machining of titanium alloy, Ti6Al4V to achieve nano level surface roughness
by: Amin, A. K. M. Nurul, et al.
Published: (2012)

Cutting force and surface roughness characterization in cryogenic high-speed end milling of Ti-6Al-4V ELI
by: Safari, H., et al.
Published: (2014)

Analysis and optimum machining parameters on surface roughness and material removal rate for titanium alloy in milling machining with MQL
by: Siti Haryani, Tomadi, et al.
Published: (2023)

Surface integrity in end milling titanium alloy Ti6Al4V under heat assisted machining
by: Ginta, Turnad Lenggo, et al.
Published: (2013)

Machining of titanium alloy (Ti-6Al-4V) - theory to application
by: Pramanik, Alokesh, et al.
Published: (2015)

Improved machinability of Titanium alloy Ti-6Al-4V: implementation of preheated machining
by: Ginta, Turnad Lenggo, et al.
Published: (2010)

Comparison of dry and cryogenic machining on chip formation and coefficient of friction in turning AISI 4340 alloy steel
by: A. Raof, Natasha, et al.
Published: (2014)

Influence of preheating on chatter and machinability of titanium alloy - Ti6A14V
by: Kamdani, Kamaruddin
Published: (2005)

Influence of preheating on chatter and machinability of titanium alloy-Ti6A14V
by: Kamdani, Kamaruddin
Published: (2005)

Some aspects of improved machinability in preheated machining of Titanium alloy Ti-6Al-4V
by: Amin, A. K. M. Nurul, et al.
Published: (2011)

Tribological properties of surface modified Ti-6Al-4V alloy under lubricated condition using Taguchi approach
by: Maleque, Md. Abdul, et al.
Published: (2018)

Enhancement of machinability by workpiece preheating in end milling of Ti-6Al-4V
by: Hossain, Muhammad Ishtiyaq, et al.
Published: (2008)

Assessment of machining cost for end-milling of Ti-6Al-4V titanium alloy through RSM-based parametric model
by: Karim, A.N. Mustafizul, et al.
Published: (2014)

Surface roughness models for end milling titanium alloy TI-6AL-4V under room temperature and preheated machining
by: Ginta, Turnad Lenggo, et al.
Published: (2009)

Surface roughness and surface integrity of end milled titanium alloy TI-6AL-4V at room temperature and preheated machining
by: Ginta, Turnad Lenggo, et al.
Published: (2009)

Evaluation Of Cutting Force in End Milling Process of Aluminum Alloy 6061-T6 Using Tungsten Carbide Inserts with MQL Method Utilizing Hybrid Nanofluid
by: Wahaizad, Safiei, et al.
Published: (2021)

Influence of workpiece preheating on chatter and machinability of Titanium alloy - Ti6Al4V
by: Amin, A. K. M. Nurul, et al.
Published: (2011)

Enhancement of surface integrity in cryogenic high speed ball nose end milling process of inconel 718
by: Musfirah, Abdul Hadi, et al.
Published: (2020)

Chatter detection on thin wall machining of alluminum alloy under MQL condition
by: Amirul Syafiq, Ibrahim
Published: (2016)

Characteristics of Hybrid Nanolubricants for MQL Cooling lubrication machining application
by: Syh Kai, Lim, et al.
Published: (2022)

Application of permanent magnets for chatter control in end milling of titanium alloy Ti-6Al-4V
by: Sulaiman, Syidatul Akma, et al.
Published: (2012)

Application of permanent electromagnet for chatter control in end milling of Titanium alloy - Ti6Al4V
by: Amin, A. K. M. Nurul, et al.
Published: (2011)

Impact of Palm Oil based Minimum Quantity of Lubrication on Machinability of Ti and its Alloy (Ti-6AI-4V)
by: Wong, Gary Ang Kui
Published: (2022)

Micro-milling of Ti-6Al-4V material
by: Nurul Aini, Yunus
Published: (2016)

Workpiece preheating approach to reduce chatter and improve machinability of titanium alloy- Ti6A14V
by: Nurul Amin, A.K.M, et al.
Published: (2011)

Tool life assessment in End Milling Titanium Alloy (Ti-6AI-4V) using PCD inserts
by: Ginta, Turnad Lenggo, et al.
Published: (2008)

Tool life assessment in end milling titanium alloy (Ti-6Al-4V) using PCD inserts
by: Turnad L., Ginta, et al.
Published: (2008)

Performance of Al2O3/TiO2 hybrid nano-cutting fluid in mql turning operation via RSM approach
by: Arifuddin, Ariffin, et al.
Published: (2022)

Influence of magnetic field on reduction chatter and of surface roughness in end milling of Titanium Alloy - Ti-6Al-4V
by: Sulaiman, Syidatul Akma, et al.
Published: (2012)

Additive manufacturing of Ti-6Al-4V alloy- A review
by: Nguyen, Hung Dang, et al.
Published: (2022)

Surface Modification and Bioactivity of Anodic Ti6Al4V Alloy
by: Saharudin, Khairul Arifah, et al.
Published: (2013)

Surface alloying of Ti-6Al-4V using Cu-TaC composite electrode during electrical discharge machining
by: Mohammed Baba, Ndaliman, et al.
Published: (2011)

On the machinability of directed energy deposited Ti6Al4V
by: Oyelola, Olusola, et al.
Published: (2018)

Chatter suppression in end milling of Titanium alloy Ti6Al4V applying permanent magnet clamped adjacent to the workpiece
by: Amin, A. K. M. Nurul, et al.
Published: (2011)