Investigation of alumina additive in lubricant oil for enhanced engine performance
Nanoparticles have been studied as additives to lubrication oils for reducing friction and wear. The purpose of this paper is to investigate the effect of different size nanoparticles on engine oil. Nanolubricant containing 13 nm and 52 nm Al2O3 nanoparticles in engine oil as base fluid in different...
Similar Items
Investigation of carbon nanotube and zinc oxide as additive for enhanced lubricant performance
by: Rameish Rao, Subarmaniyan
Published: (2013)
by: Rameish Rao, Subarmaniyan
Published: (2013)
Investigation of the effect of starch addition on protein foaming-consolidation porous alumina containing hydroxyapatite nanopowder
by: ., Ahmad Fadli, et al.
Published: (2011)
by: ., Ahmad Fadli, et al.
Published: (2011)
The effects of additives on anti-wear properties of lubricating grease formulated from waste engine oil
by: Nurul Waheeda, Abdu Rahman, et al.
Published: (2022)
by: Nurul Waheeda, Abdu Rahman, et al.
Published: (2022)
Effect of using anti-wear and friction modifier-based additives on tribological performance of engine lubricants
by: Arman, Salih, et al.
Published: (2022)
by: Arman, Salih, et al.
Published: (2022)
The effect of hydroxyapatite addition on biocompatibility of porous alumina microcarriers for vero cell culture
by: Fadli, Ahmad, et al.
Published: (2011)
by: Fadli, Ahmad, et al.
Published: (2011)
Colloidal filtration of alumina-zirconia with solid oxide additives / Hakimeh Wakily
by: Hakimeh, Wakily
Published: (2012)
by: Hakimeh, Wakily
Published: (2012)
Effect of yolk addition on protein foaming-consolidation porous alumina-calcium phosphate composite
by: Sopyan, Iis, et al.
Published: (2011)
by: Sopyan, Iis, et al.
Published: (2011)
Measurement of lubricant oil film thickness under minimum quantity lubrication milling process
by: Nur Elya Haniza, Zamiruddin
Published: (2022)
by: Nur Elya Haniza, Zamiruddin
Published: (2022)
Thermal and tribological properties enhancement of PVE lubricant modified with SiO2 and tio2 nanoparticles additive
by: Mohd Farid, Ismail, et al.
Published: (2023)
by: Mohd Farid, Ismail, et al.
Published: (2023)
Callophyllum Inophyllum shell derived of activated carbon for additive of machining lubricant
by: Khoo, Jun Li, et al.
Published: (2021)
by: Khoo, Jun Li, et al.
Published: (2021)
Effect of blending plastic pyrolytic oil and waste cooking biodiesel on engine performance, emissions and lubricity of a small diesel engine fuel with palm oil biodiesel (B30) / Muhamad Sharul Nizam Awang
by: Muhamad Sharul Nizam, Awang
Published: (2021)
by: Muhamad Sharul Nizam, Awang
Published: (2021)
The formulation of lubricating grease from waste cooking oil
by: Muhammad Auni, Hairunnaja
Published: (2024)
by: Muhammad Auni, Hairunnaja
Published: (2024)
Study on friction and wear of Cellulose Nanocrystal (CNC) nanoparticle as lubricating additive in engine oil
by: N. W., Awang, et al.
Published: (2019)
by: N. W., Awang, et al.
Published: (2019)
Investigation of Flow Behavior in Minimum Quantity Lubrication Nozzle for End Milling Processes
by: Najiha, M. S., et al.
Published: (2012)
by: Najiha, M. S., et al.
Published: (2012)
Fluoride Removal Using Alumina Nanoparticles
by: Lopog, Ecrolien Liberty
Published: (2006)
by: Lopog, Ecrolien Liberty
Published: (2006)
Shear performance of concrete slab with the addition of oil palm shell as lightweight concrete aggregate
by: Wan Nur Hafieza, Wan Mat
Published: (2015)
by: Wan Nur Hafieza, Wan Mat
Published: (2015)
On The Performance Of The Motorcycle Engine Using Used Lubricant Oil
by: Jamil, Saiful Syazwan Shamsul
Published: (2017)
by: Jamil, Saiful Syazwan Shamsul
Published: (2017)
An investigation on compressive strength of cement mortar with seashell powder additive
by: Chua, Pei Shan
Published: (2014)
by: Chua, Pei Shan
Published: (2014)
The effect of oxygenated turpentine oil additive in diesel fuel on the performance and emission characteristics in one-cylinder di engines
by: Kadarohman, Asep, et al.
Published: (2021)
by: Kadarohman, Asep, et al.
Published: (2021)
Effect of nano alumina on geopolymer mortar developed from untreated and treated palm oil waste ashes / Ng Connie
by: Ng, Connie
Published: (2019)
by: Ng, Connie
Published: (2019)
Quality enhancement of plastics recycled by incorporating lubricant additives.
by: Hashim, Shahrir, et al.
Published: (1995)
by: Hashim, Shahrir, et al.
Published: (1995)
Tribological study of nanoparticles enrichedbio-based lubricants for engine piston ring–cylinder interaction / Mubashir Gulzar
by: Mubashir, Gulzar
Published: (2017)
by: Mubashir, Gulzar
Published: (2017)
The performance of eggshell powder as an additive concrete mixed
by: Muhammad Nor Syafain, Hut
Published: (2014)
by: Muhammad Nor Syafain, Hut
Published: (2014)
On The Performance Of The Motorcycle Engine Using Filtered Recycle Lubricant Oil
by: Mohd Azam, Muhammad Azfar Razin
Published: (2018)
by: Mohd Azam, Muhammad Azfar Razin
Published: (2018)
Tribological performance of palm oil-based lubricant with nanoparticles additive / Mohamad Faizal Rosli
by: Mohamad Faizal , Rosli
Published: (2019)
by: Mohamad Faizal , Rosli
Published: (2019)
Effect of crude palm oil (CPO) as an additive in the asphalt mixture
by: Wan Abdullah, Wan Zakkhry
Published: (2017)
by: Wan Abdullah, Wan Zakkhry
Published: (2017)
An enhanced S-band brillouin/erbium fiber laser with an additional EDFA in sub-loop
by: Ahmad, Harith, et al.
Published: (2005)
by: Ahmad, Harith, et al.
Published: (2005)
Structural Performance of Reinforced Concrete
Beams Containing Used Engine Oil
by: Chin, S.C., et al.
Published: (2010)
by: Chin, S.C., et al.
Published: (2010)
Investigation on the use bottom ash as additive in optimizing cost of road pavement structure
by: Mohd Amirul Hakim, Sidek
Published: (2010)
by: Mohd Amirul Hakim, Sidek
Published: (2010)
Investigation of effect of addition of crude palm oil to asphalt pavement mix: a pilot study toward developing a warm mix asphalt
by: Nur Eleena Nadhirah, Paat
Published: (2017)
by: Nur Eleena Nadhirah, Paat
Published: (2017)
Nano additive enhanced salt hydrate phase change materials for thermal energy storage
by: Kalidasan, B., et al.
Published: (2023)
by: Kalidasan, B., et al.
Published: (2023)
An Investigation on Engineering Properties of Composite Beam
by: Sayed Javid , Azimi, et al.
Published: (2014)
by: Sayed Javid , Azimi, et al.
Published: (2014)
Synthesis and characterization of alumina nanofiber filled poly ether ether ketone (PEEK)
by: Tg Mahizatulazwa, Tg Kamaruddin
Published: (2012)
by: Tg Mahizatulazwa, Tg Kamaruddin
Published: (2012)
Effects Of Rediset Additive On The
Engineering Properties Of Warm Asphalt
Binders And Mixtures
by: Golchin, Babak
Published: (2015)
by: Golchin, Babak
Published: (2015)
Tribological investigation of tetrahedral diamond-like carbon (ta-C DLC) coatings using vegetable oil containing anti-wear additives / Abdul Mannan
by: Abdul, Mannan
Published: (2018)
by: Abdul, Mannan
Published: (2018)
Effect of lubrication condition on surface roughness by using lathe machine
by: Rohaida, Mohd.
Published: (2008)
by: Rohaida, Mohd.
Published: (2008)
Effect of crude palm oil (CPO) as an alternative additive to the binder in asphalt mixture
by: Mohamad Khaidier, Mohd Raffi
Published: (2017)
by: Mohamad Khaidier, Mohd Raffi
Published: (2017)
Enhancement of tribological behaviour and thermophysical properties of engine oil lubricant by Graphene/Co-Cr nanoparticle additives for preparation of stable nanolubricant
by: M., Sandhya, et al.
Published: (2021)
by: M., Sandhya, et al.
Published: (2021)
Review of mechanical performance of oil palm fiber and coconut fiber as an additional material in concrete
by: Zaimi, Muhammad Nor Syahrul, et al.
Published: (2022)
by: Zaimi, Muhammad Nor Syahrul, et al.
Published: (2022)
The influence of hydroxyapatite loading on protein foaming-consolidation porous alumina sintered at 1300°C
by: ., Ahmad Fadli, et al.
Published: (2011)
by: ., Ahmad Fadli, et al.
Published: (2011)
Similar Items
-
Investigation of carbon nanotube and zinc oxide as additive for enhanced lubricant performance
by: Rameish Rao, Subarmaniyan
Published: (2013) -
Investigation of the effect of starch addition on protein foaming-consolidation porous alumina containing hydroxyapatite nanopowder
by: ., Ahmad Fadli, et al.
Published: (2011) -
The effects of additives on anti-wear properties of lubricating grease formulated from waste engine oil
by: Nurul Waheeda, Abdu Rahman, et al.
Published: (2022) -
Effect of using anti-wear and friction modifier-based additives on tribological performance of engine lubricants
by: Arman, Salih, et al.
Published: (2022) -
The effect of hydroxyapatite addition on biocompatibility of porous alumina microcarriers for vero cell culture
by: Fadli, Ahmad, et al.
Published: (2011)