Hardness and microstructure characterization of hardfacing alloys deposited by the shielded metal arc welding (SMAW) on AISI 1045 medium carbon steel

QR Code

Hardness and microstructure characterization of hardfacing alloys deposited by the shielded metal arc welding (SMAW) on AISI 1045 medium carbon steel

A ring frame is a machine used for yarn production in the textile industry. Continuous use of the machine results in wear on the shaft timing pulley on the ring frame machine. To improve this condition, repairs are needed, one of which uses the hardfacing...

Full description

Bibliographic Details
Main Authors:	Basyirun, Basyirun, Muhammad Hasnan, Habib, Deni Fajar Fitriyana, ., Muhammad Irfan, Nuryanta, Siregar, Januar Parlaungan, Cionita, Tezara, Da Silva Guterres, Natalino Fonseca, De Sousa Da Silva, Mateus
Format:	Article
Language:	English
Published:	Penerbit UTHM 2024
Subjects:	TJ Mechanical engineering and machinery
Online Access:	https://umpir.ump.edu.my/id/eprint/44247/

Similar Items

Effect of compression molding temperature on the characterization of asbestos-free composite friction materials for railway applications
by: Rahmad Doni, Widodo, et al.
Published: (2023)

Effect of sandblasting on the characterization of 95MXC coating layer on 304 stainless steel prepared by the TWAS (twin wire arc spray) coating method
by: Fitriyana, Deni Fajar, et al.
Published: (2024)

The effect of temperature on the hydrothermal synthesis of carbonated apatite from calcium carbonate obtained from green mussels shells
by: Fitriyana, Deni Fajar, et al.
Published: (2023)

Effect of nozzle distance and cutting parameters on MQL machining of AISI 1045
by: Amiril Sahab, Abdul Sani, et al.
Published: (2019)

Characterization of hydroxyapatite extracted from crab shell using the hydrothermal method with varying holding times
by: Deni Fajar Fitriyana, ., et al.
Published: (2024)

Effect of Fabrication Methods on The Density and Impact Strength of Brake Pad Composites for Railway Application
by: Deni Fajar, Fitriyana, et al.
Published: (2023)

Effect of Rice Husk Addition on The Density and Impact Strength of Epoxy-Matric Composite Materials as Candidates for Eco-Friendly Brake Pads
by: Deni Fajar, Fitriyana, et al.
Published: (2023)

Electrochemical Behaviour of High Stress Steel (AISI 4340) in CO2 Environments with the Presence of H2 Gas
by: Panca Asmara, Yuli, et al.
Published: (2015)

Bio-fuel-contaminated lubricant and hardening effects on the friction and wear of AISI 1045 steel
by: Maleque, Md. Abdul, et al.
Published: (1998)

Finite element simulation of machining AISI 1045 steel using uncoated carbide tool
by: Mohmd Arifin, Nabila Afif
Published: (2012)

Finite element simulation of machining AISI 1045 steel using uncoated carbide tool
by: Mohmd Arifin, Nabila Afif
Published: (2012)

The effect of surface hardening on the HQ 705 steel camshaft using static induction hardening and tempering method
by: Nugroho, Sri, et al.
Published: (2022)

Multi-objective optimization in friction drilling of AISI1045 steel using grey relational analysis
by: Abdul Mutalib, Mohd Zurrayen, et al.
Published: (2020)

Characterization of PLA/PCL/Nano-Hydroxyapatite (nHA) biocomposites prepared via cold isostatic pressing
by: Solechan, Solechan, et al.
Published: (2023)

Investigating the effect of pcl concentrations on the characterization of pla polymeric blends for biomaterial applications
by: Solechan, Solechan, et al.
Published: (2022)

The influence of modified vegetable oils on tool failure mode and wear mechanisms when turning AISI 1045
by: Amiril Sahab, Abdul Sani, et al.
Published: (2019)

The influence of modified vegetable oils on tool failure mode and wear mechanisms when turning AISI 1045
by: Abdul Sani, Amiril Sahab, et al.
Published: (2019)

Corrosion of hardfacings for nuclear (PWR) applications
by: Karimi, Gilbert
Published: (2019)

Inﬂuence of layering sequences on tensile properties of hybrid woven Jute/Ramie ﬁbre reinforced polyester composites
by: Cionita, Tezara, et al.
Published: (2021)

A study on cryogenic supercritical carbon dioxide coolant delivery technique when machining of AISI 1045 steel
by: Abd Rahim, Erween, et al.
Published: (2018)

Application of response surface methodology in describing the performance of coated carbide tools when turning AISI 1045 steel
by: Noordin, Mohd Yusof, et al.
Published: (2004)

Application of response surface methodology in describing the performance of coated carbide tools when turning AISI 1045 steel
by: Noordin, M. Y., et al.
Published: (2004)

Application of response surface methodology in describing the performance of coated carbide tools when turning AISI 1045 steel
by: Nordin, M. Y., et al.
Published: (2004)

Study on surface integrity of AISI 1045 carbon steel when machined by carbide cutting tool under wet conditions
by: N. Fauzi, Tamin, et al.
Published: (2017)

The optimization of avocado-seed-starch-based degradable plastic synthesis with a polylactic acid (PLA) blend using response surface methodology (RSM)
by: Dewi, Rozanna, et al.
Published: (2024)

Hardfacing of duplex stainless steel using melting and diffusion processes
by: H, Lailatul, et al.
Published: (2017)

Microstructure analysis of tungsten carbide hardfacing on carbon steel blade
by: Nagentrau, M., et al.
Published: (2017)

Analyzing the effects of heat treatment on SMAW duplex stainless steel weld overlays
by: Sim, Bernard Maxmillan, et al.
Published: (2021)

Opportunities and challenges in the sustainable integration of natural fibers and particles in friction materials for eco-friendly brake pads
by: Imran, Al Ichlas, et al.
Published: (2024)

Finite element modeling of the effect of tool rake angle on cutting force and tool temperature during high speed machining of AISI 1045 steel
by: Sulaiman, Shamsuddin, et al.
Published: (2014)

Comparison machining performance of Al2 O3 , ZTA and ZTA doped Cr2 O3 cutting tools on AISI 1045
by: T., Norfauzi, et al.
Published: (2019)

Enhancement of flexural modulus and strength of epoxy nanocomposites with the inclusion of functionalized GNPs using Tween 80
by: Wan Zateel Aqmaer, Wan Ab Halim, et al.
Published: (2024)

Influence of Post-Heat Treatment on the Characteristics of FeCrBMnSi Coating on Stainless Steel 304 Substrate Prepared by Twin Wire Arc Spray (TWAS) Method at Various Stand-off Distance
by: Irawan, Agustinus Purna, et al.
Published: (2024)

Thin surface layers of iron-based alloys deposited by TIG hardfacing
by: Sakiru, Adeleke, et al.
Published: (2015)

Arduino-based automatic cutting tool for coconut shell charcoal briquettes
by: Anis, samsudin, et al.
Published: (2024)

The Influence of Filler Loading and Alkaline Treatment on the Mechanical Properties of Palm Kernel Cake Filler Reinforced Epoxy Composites
by: Cionita, Tezara, et al.
Published: (2022)

The inﬂuence of filler loading and alkaline treatment on the mechanical properties of palm kernel cake filler reinforced epoxy composites
by: Cionita, Tezara, et al.
Published: (2022)

Advancements in sustainable material development: A comprehensive review of coir fiber and its composites
by: Imran, Al Ichlas, et al.
Published: (2024)

The influence of filler loading and alkaline treatment on the mechanical properties of palm kernel cake filler reinforced epoxy composites
by: Cionita, Tezara, et al.
Published: (2022)

Effect of alkalization time on the toughness and strength of jute sack waste lamina composite as an alternative car bumper material
by: Heri, Yudiono, et al.
Published: (2024)