Statistical Approach to the Cellulose Nanocrystal Tribological Behavior on the Piston Liner Contact Using Full Factorial Design (FFD)
The primary goal of this research is to investigate the effect of tribo-test parameters on the coefficient of friction (COF) and wear rate of the cylinder liner and piston ring pair. The tribological studies are carried out utilizing a full factorial design (FFD) experimental scheme. Sliding speed,...
Similar Items
A comprehensive review on tribological behaviour of hybrid Nanocellulose-CuO as nanolubricant for piston ring cylinder liner application
by: Sakinah, Muhamad Hisham, et al.
Published: (2024)
by: Sakinah, Muhamad Hisham, et al.
Published: (2024)
A Comprehensive Review on Tribological Behaviourof Hybrid Nanocellulose-CuO as Nanolubricantfor Piston Ring Cylinder Liner Application
by: Sakinah, Muhamad Hisham, et al.
Published: (2024)
by: Sakinah, Muhamad Hisham, et al.
Published: (2024)
Copper (II) oxide nanoparticles as additve in engine oil to increase the durability of piston-liner contact
by: Asnida, M., et al.
Published: (2018)
by: Asnida, M., et al.
Published: (2018)
Prediction and Optimization of Thermophysical Properties of Hybrid Cellulose Nanocrystal-Copper (II) Oxide Nanolubricant for Tribology Application
by: Sakinah, Hisham, et al.
Published: (2023)
by: Sakinah, Hisham, et al.
Published: (2023)
Thermophysical properties and tribological behavior of hybrid cellulose nanocrystal copper (ii) oxide (cnc-cuo) as lubricant additives
by: Sakinah, Muhamad Hisham
Published: (2022)
by: Sakinah, Muhamad Hisham
Published: (2022)
Numerical analysis of tribological characteristics for textured piston ring-liners in mixed lubrication with a non-circular cylinder bore
by: Bahrom, Mohd Zaki, et al.
Published: (2022)
by: Bahrom, Mohd Zaki, et al.
Published: (2022)
Investigation of Waste Cooking Oil as a Tribological Lubricant for Piston Skirt Application
by: Amirruddin, Abdul Kadir, et al.
Published: (2016)
by: Amirruddin, Abdul Kadir, et al.
Published: (2016)
The tribological behaviour of Al-Si automotive piston material
by: ., Arifutzzaman, et al.
Published: (2011)
by: ., Arifutzzaman, et al.
Published: (2011)
Application of Fractional Factorial Design (FFD) for Screening of Significant Factor in Influencing Succinic acid Production from Biodiesel Based Glycerol Using Escherichia Coli
by: Mimi Sakinah, A. M., et al.
Published: (2011)
by: Mimi Sakinah, A. M., et al.
Published: (2011)
Analysis of thermal Conductivity for Cellulose Nanocrystal (CNC) based nanofluid
by: K., Kadirgama, et al.
Published: (2019)
by: K., Kadirgama, et al.
Published: (2019)
A floating liner facility and studies of friction at a reciprocating piston-cylinder wall interface
by: Islam, Md Rezaul
Published: (2016)
by: Islam, Md Rezaul
Published: (2016)
Graphene nanoplatelets–cellulose nanocrystals in engine oil for automotive applications
by: G., Kadirgama, et al.
Published: (2022)
by: G., Kadirgama, et al.
Published: (2022)
Screening of Aloe vera medium with different carbon and nitrogen sources for Lactobacillus acidophilus cultivation using fractional factorial design (FFD)
by: Mohammed Yaziz, Hifa Nazirah, et al.
Published: (2013)
by: Mohammed Yaziz, Hifa Nazirah, et al.
Published: (2013)
Investigation on tribological properties on strontium modified piston alloy under lubricated condition
by: Haque, Md. Mohafizul, et al.
Published: (2009)
by: Haque, Md. Mohafizul, et al.
Published: (2009)
Surface chemistry of cellulose nanocrystals
by: Sirbu, Elena
Published: (2016)
by: Sirbu, Elena
Published: (2016)
Green engine coolant (GEC): cellulose nanocrystals as engine coolant process
by: D., Ramasamy, et al.
Published: (2018)
by: D., Ramasamy, et al.
Published: (2018)
Elucidation and model development of thermal conductivity analysis for cellulose nanocrystal (CNC) based nanofluid
by: K., Kadirgama, et al.
Published: (2018)
by: K., Kadirgama, et al.
Published: (2018)
Thermal analysis of cellulose nanocrystal-ethylene glycol nanofluid coolant
by: Lingenthiran, Samylingam, et al.
Published: (2018)
by: Lingenthiran, Samylingam, et al.
Published: (2018)
Prediction modelling for Cellulose Nanocrystal (CNC) dispersed in ethylene glycol- water mixture
by: D., Ramasamy, et al.
Published: (2019)
by: D., Ramasamy, et al.
Published: (2019)
An experimental study on characterization and properties of nano lubricant containing Cellulose Nanocrystal (CNC)
by: N. W., Awang, et al.
Published: (2019)
by: N. W., Awang, et al.
Published: (2019)
Preparation and characterization of poly(vinyl alcohol)/chitosan bio-nanocomposites reinforced with cellulose nanocrystals, cellulose nanocrystals/zinc oxide and cellulose nanocrystals/zinc oxide-silver nanoparticles
by: Azizy, Sussan
Published: (2014)
by: Azizy, Sussan
Published: (2014)
Factorial screening on the development of cellulose nanocrystal/ carboxylated multi-walled carbon nanotube polyethersulfone membrane for humic acid rejection
by: Nor Azura, Che Mahmud, et al.
Published: (2022)
by: Nor Azura, Che Mahmud, et al.
Published: (2022)
Statistical analysis on tribology behavior of stainless steel surface in aloe vera blended lubricant
by: Amirruddin, Abdul Kadir, et al.
Published: (2020)
by: Amirruddin, Abdul Kadir, et al.
Published: (2020)
Study on friction and wear of Cellulose Nanocrystal (CNC) nanoparticle as lubricating additive in engine oil
by: N. W., Awang, et al.
Published: (2019)
by: N. W., Awang, et al.
Published: (2019)
Tribological behaviour of an electrochemical jet machined
textured Al-Si automotive cylinder liner material
by: Walker, J.C., et al.
Published: (2017)
by: Walker, J.C., et al.
Published: (2017)
Effects of Kevlar® 29 yarn twist on tensile and tribological properties of self-lubricating fabric liner
by: Ma, J., et al.
Published: (2016)
by: Ma, J., et al.
Published: (2016)
Investigation on effective thermal conductivity and relative viscosity of cellulose nanocrystal as a nanofluidic thermal transport through a combined experimental – Statistical approach by using Response Surface Methodology
by: K., Ramachandran, et al.
Published: (2017)
by: K., Ramachandran, et al.
Published: (2017)
A statistical study on the development of metronidazole-chitosan-alginate nanocomposite formulation using the full factorial design
by: Sabbagh, Hazem Abdul Kader, et al.
Published: (2020)
by: Sabbagh, Hazem Abdul Kader, et al.
Published: (2020)
Experimental investigation and empirical model development of thermal conductivity for cellulose nanocrystal (CNC) based nanofluid
by: D., Ramasamy, et al.
Published: (2017)
by: D., Ramasamy, et al.
Published: (2017)
Design And Verification Of An Oscillating Wear Tester To Stimulate The Piston-Cylinder Tribology In Internal Combustion Engines
by: Al-Tmeemi, Bhaa Alden Hussein Ali
Published: (2011)
by: Al-Tmeemi, Bhaa Alden Hussein Ali
Published: (2011)
Preliminary fractional factorial design (FFD) study using incorporation of graphene oxide in PVC in mixed matrix membrane to enhance CO2 /CH4 separation
by: Raj, K. R., et al.
Published: (2019)
by: Raj, K. R., et al.
Published: (2019)
Waste Cooking Oil Blended With The Engine Oil For Reduction of Friction and Wear On Piston Skirt
by: Sakinah, Hisham, et al.
Published: (2017)
by: Sakinah, Hisham, et al.
Published: (2017)
Study of wear mechanism in the contact between table liner and roller of vertical roller mills
by: Kamal, Ariffin
Published: (2011)
by: Kamal, Ariffin
Published: (2011)
Tribological study of nanoparticles enrichedbio-based lubricants for engine piston ring–cylinder interaction / Mubashir Gulzar
by: Mubashir, Gulzar
Published: (2017)
by: Mubashir, Gulzar
Published: (2017)
Biodegradability of cellulose nanocrystal/thermoplastic polyurethane nanocomposite
by: Afkar Rabbani Hidayatullah, Hipeni, et al.
Published: (2021)
by: Afkar Rabbani Hidayatullah, Hipeni, et al.
Published: (2021)
Cellulose nanocrystal reinforced thermoplastic polyurethane nanocomposites
by: Amin, Khairatun Najwa Mohd, et al.
Published: (2019)
by: Amin, Khairatun Najwa Mohd, et al.
Published: (2019)
Enhancement of Tribological Behaviour and Thermal Properties of Hybrid Nanocellulose/Copper (II) Oxide Nanolubricant
by: Sakinah, Muhammad Hisham, et al.
Published: (2020)
by: Sakinah, Muhammad Hisham, et al.
Published: (2020)
Synthesis and characterization of hydroxyethyl cellulose/chitosan incorporated with cellulose nanocrystal biopolymers network
by: Farah Hanani, Zulkifli, et al.
Published: (2024)
by: Farah Hanani, Zulkifli, et al.
Published: (2024)
Cellulose nanocrystal: electronically conducting polymer nanocomposites for supercapacitors
by: Liew, Soon Yee
Published: (2012)
by: Liew, Soon Yee
Published: (2012)
Isolation and fractionation of cellulose nanocrystals from kenaf core
by: Hanisah Syed Sulaiman,, et al.
Published: (2015)
by: Hanisah Syed Sulaiman,, et al.
Published: (2015)
Similar Items
-
A comprehensive review on tribological behaviour of hybrid Nanocellulose-CuO as nanolubricant for piston ring cylinder liner application
by: Sakinah, Muhamad Hisham, et al.
Published: (2024) -
A Comprehensive Review on Tribological Behaviourof Hybrid Nanocellulose-CuO as Nanolubricantfor Piston Ring Cylinder Liner Application
by: Sakinah, Muhamad Hisham, et al.
Published: (2024) -
Copper (II) oxide nanoparticles as additve in engine oil to increase the durability of piston-liner contact
by: Asnida, M., et al.
Published: (2018) -
Prediction and Optimization of Thermophysical Properties of Hybrid Cellulose Nanocrystal-Copper (II) Oxide Nanolubricant for Tribology Application
by: Sakinah, Hisham, et al.
Published: (2023) -
Thermophysical properties and tribological behavior of hybrid cellulose nanocrystal copper (ii) oxide (cnc-cuo) as lubricant additives
by: Sakinah, Muhamad Hisham
Published: (2022)