Study of cutting speed effects on lubricant oil film thickness under minimum quantity lubrication
In recent decades, there has been increasing interest in the study of Minimum Quantity Lubrication (MQL) due to its outstanding performance despite the minimal usage of cutting oil. However, study focusing on the behavior of oil mist during the MQL machining process is still scarcely reported. It is...
| Main Authors: | , , |
|---|---|
| Format: | Conference or Workshop Item |
| Language: | English |
| Published: |
Springer Singapore
2020
|
| Subjects: | |
| Online Access: | http://umpir.ump.edu.my/id/eprint/27251/ http://umpir.ump.edu.my/id/eprint/27251/1/43.1%20Study%20of%20cutting%20speed%20effects%20on%20lubricant%20oil.pdf |
| _version_ | 1848822744719818752 |
|---|---|
| author | Nur Izzati Khoirunnisa, Ismail Nurrina, Rosli Amagai, Kenji |
| author_facet | Nur Izzati Khoirunnisa, Ismail Nurrina, Rosli Amagai, Kenji |
| author_sort | Nur Izzati Khoirunnisa, Ismail |
| building | UMP Institutional Repository |
| collection | Online Access |
| description | In recent decades, there has been increasing interest in the study of Minimum Quantity Lubrication (MQL) due to its outstanding performance despite the minimal usage of cutting oil. However, study focusing on the behavior of oil mist during the MQL machining process is still scarcely reported. It is important to clarify this matter in detail as to explain how the lubricant oil mist can successfully reach the narrow cutting zone. The aim of this study was to investigate the cutting speed effects on the behavior of lubricant oil film by measuring its thickness accumulation on the workpiece after the MQL milling process. Measurement was conducted by using Laser Induced Fluorescence (LIF) method. Results showed that the average thickness of oil film generated at the center of milling path was approximately at 0.37 mm. Penetration ability of lubricant oil to reach the narrow cutting zone dropped with increasing cutting speed and subsequently leading to accumulation of thicker oil film at the cliffs of milling path. Further investigation is needed to clarify whether the nozzle position or the cutter flute may be the attributor of this phenomena. Moreover, it was found that the MQL machining must be conducted appropriately to ensure the oil mist can successfully lubricating the cutting zone on the entire workpiece. |
| first_indexed | 2025-11-15T02:46:07Z |
| format | Conference or Workshop Item |
| id | ump-27251 |
| institution | Universiti Malaysia Pahang |
| institution_category | Local University |
| language | English |
| last_indexed | 2025-11-15T02:46:07Z |
| publishDate | 2020 |
| publisher | Springer Singapore |
| recordtype | eprints |
| repository_type | Digital Repository |
| spelling | ump-272512020-01-17T02:53:14Z http://umpir.ump.edu.my/id/eprint/27251/ Study of cutting speed effects on lubricant oil film thickness under minimum quantity lubrication Nur Izzati Khoirunnisa, Ismail Nurrina, Rosli Amagai, Kenji TJ Mechanical engineering and machinery TS Manufactures In recent decades, there has been increasing interest in the study of Minimum Quantity Lubrication (MQL) due to its outstanding performance despite the minimal usage of cutting oil. However, study focusing on the behavior of oil mist during the MQL machining process is still scarcely reported. It is important to clarify this matter in detail as to explain how the lubricant oil mist can successfully reach the narrow cutting zone. The aim of this study was to investigate the cutting speed effects on the behavior of lubricant oil film by measuring its thickness accumulation on the workpiece after the MQL milling process. Measurement was conducted by using Laser Induced Fluorescence (LIF) method. Results showed that the average thickness of oil film generated at the center of milling path was approximately at 0.37 mm. Penetration ability of lubricant oil to reach the narrow cutting zone dropped with increasing cutting speed and subsequently leading to accumulation of thicker oil film at the cliffs of milling path. Further investigation is needed to clarify whether the nozzle position or the cutter flute may be the attributor of this phenomena. Moreover, it was found that the MQL machining must be conducted appropriately to ensure the oil mist can successfully lubricating the cutting zone on the entire workpiece. Springer Singapore 2020 Conference or Workshop Item PeerReviewed pdf en http://umpir.ump.edu.my/id/eprint/27251/1/43.1%20Study%20of%20cutting%20speed%20effects%20on%20lubricant%20oil.pdf Nur Izzati Khoirunnisa, Ismail and Nurrina, Rosli and Amagai, Kenji (2020) Study of cutting speed effects on lubricant oil film thickness under minimum quantity lubrication. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems , 21-22 August 2019 , Putrajaya, Malaysia. pp. 584-589.. ISBN 978-981-15-0950-6 (Published) https://doi.org/10.1007/978-981-15-0950-6_89 |
| spellingShingle | TJ Mechanical engineering and machinery TS Manufactures Nur Izzati Khoirunnisa, Ismail Nurrina, Rosli Amagai, Kenji Study of cutting speed effects on lubricant oil film thickness under minimum quantity lubrication |
| title | Study of cutting speed effects on lubricant oil film thickness under minimum quantity lubrication |
| title_full | Study of cutting speed effects on lubricant oil film thickness under minimum quantity lubrication |
| title_fullStr | Study of cutting speed effects on lubricant oil film thickness under minimum quantity lubrication |
| title_full_unstemmed | Study of cutting speed effects on lubricant oil film thickness under minimum quantity lubrication |
| title_short | Study of cutting speed effects on lubricant oil film thickness under minimum quantity lubrication |
| title_sort | study of cutting speed effects on lubricant oil film thickness under minimum quantity lubrication |
| topic | TJ Mechanical engineering and machinery TS Manufactures |
| url | http://umpir.ump.edu.my/id/eprint/27251/ http://umpir.ump.edu.my/id/eprint/27251/ http://umpir.ump.edu.my/id/eprint/27251/1/43.1%20Study%20of%20cutting%20speed%20effects%20on%20lubricant%20oil.pdf |