Study Of The Surface Integrity Of The Machined Workpiece In The Wedm Of Tungsten Carbide

QR Code

Study Of The Surface Integrity Of The Machined Workpiece In The Wedm Of Tungsten Carbide

This paper presented a study on the surface integrity of the machined surface of tungsten carbide (WC-15%Co) using wire electro-discharge machining (WEDM). WEDM tests on a WC-15%Co workpiece were conducted on a Sodick WEDM 5-axes series AQ537L, with the pulse duration (ON), pulse interval (OFF), pea...

Full description

Bibliographic Details
Main Authors:	Mas Ayu, Hassan, Rosdi, Daud, Siti Haryani, Tomadi
Format:	Conference or Workshop Item
Language:	English
Published:	2008
Subjects:	TJ Mechanical engineering and machinery
Online Access:	http://umpir.ump.edu.my/id/eprint/1228/ http://umpir.ump.edu.my/id/eprint/1228/2/2008_Full_Paper_MMC08_Mas_Ayu.pdf

Similar Items

Surface Integrity Study In WEDM Of Tungsten Carbide
by: Mas Ayu, Hassan
Published: (2008)

Analysis of the Influence of EDM Parameters on Surface Quality, Material Removal Rate and Electrode Wear of Tungsten Carbide
by: Siti Haryani, Tomadi, et al.
Published: (2009)

Effects Of Polarity Parameter On Machining Of Tool Steel Workpiece Using Electrical Discharge Machining
by: Mohamed Reza Zalani, Mohamed Suffian, et al.
Published: (2010)

Performance evaluation of wire electro-discharge machining on tungsten carbide
by: Hassan, Mas Ayu
Published: (2006)

Wire Electrical Discharge Machining of Tungsten Carbide
by: Mas Ayu, Hassan
Published: (2008)

Study of the Surface Integrity of AISI 4140 Steel in Wire Electrical Discharge Machining
by: Mas Ayu, Hassan, et al.
Published: (2009)

Analysis and simulation of temperature distribution and stress development in wire edm of tungsten carbide
by: Ali Imran, Awaludin, et al.
Published: (2022)

Study Of The Surface Integrity Of AISI 4140 Steel In Wire Electrical Discharge Machining
by: Mas Ayu, Hassan, et al.
Published: (2009)

Optimization of Chemical Pretreatment for Removing Cobalt on Tungsten Carbide Substrate Using Response Surface Methodology
by: A., Shah, et al.
Published: (2016)

Surface hardenability studies of the die steel machined by WEDM
by: Mussada, Eswara Krishna, et al.
Published: (2018)

Investigation of machining performance of the PVD coated tungsten carbide by sandblasting pre-treatment
by: Hariz Sufiyan, Mohamed Sunari
Published: (2012)

The implementation of Taguchi method on EDM process of Tungsten Carbide
by: Lajis, Mohd Amri, et al.
Published: (2009)

Influence of Wire Electrical Discharge Machining (WEDM) process parameters on surface roughness
by: Ali, Mohammad Yeakub, et al.
Published: (2018)

Effect of tungsten carbide partial dissolution on the microstructure evolution of a laser clad surface
by: Fazliana, Fauzun, et al.
Published: (2020)

Effect of dry and MQL cutting condition on coated carbide cutting tool during the end milling of Ti-6Al-4V titanium alloy
by: Aiman Nazrin, Noor Ismail, et al.
Published: (2024)

Wear Mechanism of Coated and Uncoated Carbide Cutting Tool in Machining Process
by: J. A., Ghani, et al.
Published: (2016)

The implementation of Taguchi method on EDM process of tungsten carbide
by: Lajis, Mohd Amri, et al.
Published: (2009)

Analysis and optimum machining parameters on surface roughness and material removal rate for titanium alloy in milling machining with MQL
by: Siti Haryani, Tomadi, et al.
Published: (2023)

Influence of the angle of cut of workpiece on taper and corner roundness during Wire Electrical Discharge Machining (WEDM)
by: Khan, Ahsan Ali, et al.
Published: (2017)

Effect of Cutting Parameters on Surface Roughness in End Milling of AlSi/AlN Metal Matrix Composite
by: Siti Haryani, Tomadi, et al.
Published: (2017)

Micromilling of tungsten carbide using focused ion beam
by: Ali, Mohammad Yeakub, et al.
Published: (2005)

Development, modeling, and experimental investigation of low frequency workpiece vibration-assisted micro-EDM of tungsten carbide
by: Jahan, M. P., et al.
Published: (2010)

Progressive tool wear in machining biomedical alloy using uncoated and titanium diboride coated tungsten carbide tools
by: Mohd Hafizu, Zakaria
Published: (2019)

Achievement of ductile regime machining in high speed end milling of soda lime glass by using tungsten carbide tool insert
by: Amin, A. K. M. Nurul, et al.
Published: (2015)

Micro wire electrical discharge machining of tungsten carbide: analysis of surface roughness
by: Mohammad , Yeakub Ali, et al.
Published: (2011)

Enhancing μ-wedming (wire electro-discharge machining) of polished silicon wafer by conductive coating
by: Rasheed, Aous Naji, et al.
Published: (2014)

Thermal stability of laser-clad tool steel with fine tungsten carbide particle addition
by: Fazliana, Fauzun, et al.
Published: (2025)

Effects of electrical discharge machining (EDM) jet flushing setting on the machining of tool steel workpiece
by: Hasan, Muda
Published: (2009)

Effects of polarity parameter on the machining of tool steel workpiece using electric discharge machining (EDM)
by: Ahmad Fadzil, Mohamad
Published: (2009)

Surface Modification on CoCrMo Alloy to Improve the Adhesion Strength of Hydroxyapatite Coating
by: Mas Ayu, Hassan, et al.
Published: (2017)

Single objective optimization of EDM machining on titanium workpiece using Taguchi method
by: Wan Mohd Ariff, Wan Azli
Published: (2012)

Comparative study of conventional and micro WEDM based on machining of meso/micro sized spur gear
by: Ali, Mohammad Yeakub, et al.
Published: (2010)

Thermal oxidation promotes growth of nanocrystalline diamond on biomedical grade Co Cr mo alloy
by: Mas Ayu, Hassan, et al.
Published: (2019)

Study on surface integrity of tungsten carbide macidned by die-sinking EDM using Taguchi method / Amizan Amran
by: Amran, Amizan
Published: (2009)

Investigation of machining performance of the coated carbide cutting tools with murakami surface pretreatment
by: Khairul Azmi, Mohd Mawardzi
Published: (2012)

Study On The Effect Of Tool Nose Wear On Surface Roughness And Dimensional Deviation Of Workpiece In Finish Turning Using Machine Vision.
by: Haghighi, Hamidreza Shahabi
Published: (2008)

Surface roughness studies in die-sink EDM of tungsten carbide using copper tungsten electrode
by: Konneh, Mohamed, et al.
Published: (2011)

Surface characteristics and removal mechanism of cemented tungsten carbides in nanoscratching
by: Sun, H, et al.
Published: (2010)

Investigation of machining performance of the coated carbide cutting tools with acid etching surface pretreatment
by: Muhammad Fahmi , Jasri
Published: (2012)

Study of Flow and Temperature Effect on Carbon Steel in Oil and Gas Environment
by: R., Daud, et al.
Published: (2015)