Sorptivity of water in sound and demineralised enamel / Gan Siew Chen
Initial caries which present clinically as white spot lesions typically start with demineralisation of the enamel surface which causes an increase in surface porosity. At the same time, non-porous highly mineralised surface layer which is commonly known as “surface layer” progressively forms on t...
| Main Author: | |
|---|---|
| Format: | Thesis |
| Published: |
2019
|
| Subjects: | |
| Online Access: | http://studentsrepo.um.edu.my/11319/ http://studentsrepo.um.edu.my/11319/4/siew_chen.pdf |
| Summary: | Initial caries which present clinically as white spot lesions typically start with
demineralisation of the enamel surface which causes an increase in surface porosity. At
the same time, non-porous highly mineralised surface layer which is commonly known
as “surface layer” progressively forms on the enamel. If demineralisation continues, the
surface layer breaks down and the enamel surface becomes porous again. The intermittent
presence of the surface layer in the cycle of remineralisation and demineralisation could
be the reason for the lack of conclusive evidence of success in remineralisation therapies.
Remineralisation materials may not be penetrating the surface efficiently when the
surface layer is present. There are currently no clinical methods to determine the porosity
of the enamel surface. If porosity and presence of the highly mineralised surface layer on
white spot lesions can be determined, the success of remineralisation therapy can be
improved. In this research, it is hypothesised that the measured rate of absorption using
sorptivity on sound and demineralised enamel surface can be used to determine the level
of porosity and presence of a surface layer on the enamel surface. The aim of this thesis
is to determine the association between sorptivity of water and the state of mineralisation
of surface enamel by first, exploring the viability of sorptivity as a tool to measure surface
absorption rate on sound and demineralised enamel. Secondly, is to explore the
associations between sorptivity with mineral density on sound and demineralised enamel
surface. A 0.7 microliter droplet of water was placed with a micropipette on the exposed
enamel of 96 teeth (192 test sites) which had undergone various duration of pH cycling
(GS- group of specimens that did not undergo pH cycling, G7- group of specimens that
underwent 7 days pH cycling, G14- group of specimens that underwent 14 days pH
cycling, G21- group of specimens that underwent 21 days pH cycling, G28- group of
specimens that underwent 28 days pH cycling and G35- group of specimens that
iv
underwent 35 days pH cycling). Thorlabs Swept-Source OCT system (OCS 1300SS) was
used to measure the height of the drop every 10 seconds for 2 minutes. Sorptivity of each
test site was then computed after accounting for evaporation. Total Delta Z of grey scale
value from 10µm (TDZ10) to 50µm (TDZ50) was calculated using images taken with
microcomputed tomography (Micro- CT). Integrated reflectivity is measured from 10 µm
(IR10) to 50 µm (IR500 using images taken with OCT1300SS. SEM, Micro-CT,
photography and stereo microscope images were taken to provide qualitative analysis.
SPSS 25 (IBM) with One-way ANOVA, post-hoc Tukey and Dunnett’s T3 was used to
compare means and Bivariate (Pearson) Correlations was used to compare 2 variables.
Results show that mean sorptivity increased from GS to G14 and from G21 to G35,
juxtaposed by a decline between G14 and G21. One-Way ANOVA showed significant
difference of mean sorptivity between groups (p<0.0). Mean TDZ10 and mean IR10 seem
to project the same relationship between groups. This appears to confirm the cycle of
remineralisation and demineralisation and the presence of a surface layer in G21. The
most significant correlation was found between sorptivity and TDZ10 with Pearson
Correlation coefficient of 0.461. IR10 show significant correlations with sorptivity when
results from GS, G7, G14 and G21 were chosen with Pearson correlation coefficient of
0.275. Qualitatively, the presence of a surface layer in many test sites in G21 explains the
reason for low mean sorptivity value for this group. In conclusion, these tests have shown
for the first time that sorptivity of water is linearly and inversely correlated with the state
of mineralisation at the surface of enamel. Sorptivity can be used to determine the
presence of a surface layer. |
|---|