Investigation of swirl injectors and supersonic nozzles for the development of a meso-scale thrust chamber / Ahmad Hussein Abdul Hamid
Issues of propellant atomizing, mixing and viscous loss become increasingly more important as the thrust chamber are reduced in size. Two main components in thrust chamber have been identified as critical since small differences in its design can result in dramatically different performance. They...
| Main Author: | Abdul Hamid, Ahmad Hussein |
|---|---|
| Format: | Thesis |
| Language: | English |
| Published: |
2008
|
| Subjects: | |
| Online Access: | https://ir.uitm.edu.my/id/eprint/544/ |
Similar Items
Swirl flow in combustion chambers
by: Mohammed, Akmal Nizam
Published: (2008)
by: Mohammed, Akmal Nizam
Published: (2008)
Numerical investigation of the deposit effect on GDI injector nozzle flow
by: Wang, Bo, et al.
Published: (2017)
by: Wang, Bo, et al.
Published: (2017)
CFD analysis of the supersonic nozzle flow with sudden expansion
by: Ahmed, Khizar Pathan, et al.
Published: (2016)
by: Ahmed, Khizar Pathan, et al.
Published: (2016)
Optimization of area ratio and thrust in suddenly expanded flow at supersonic Mach numbers
by: Pathan, Khizer Ahmed, et al.
Published: (2018)
by: Pathan, Khizer Ahmed, et al.
Published: (2018)
Conceptual development of a pressure-swirl injector for a two-stroke GDI engine
by: Abdul Aziz, Azhar, et al.
Published: (2006)
by: Abdul Aziz, Azhar, et al.
Published: (2006)
Control of nozzle flow using microjets at supersonic Mach Regime
by: G M, Fharukh, et al.
Published: (2019)
by: G M, Fharukh, et al.
Published: (2019)
Coherent structures in a swirl injector at Re=4800 by nonlinear simulations and linear global modes
by: Tammisola, Outi, et al.
Published: (2016)
by: Tammisola, Outi, et al.
Published: (2016)
Inspection of supersonic flows in a CD nozzle using experimental method
by: Azami, Muhammad Hanafi, et al.
Published: (2019)
by: Azami, Muhammad Hanafi, et al.
Published: (2019)
Wall Pressure Measurements Beneath the Supersonic Jets in
an Abruptly Augmented Nozzle
by: Bashir, Musavir, et al.
Published: (2020)
by: Bashir, Musavir, et al.
Published: (2020)
Simulation of gaseous fuel injector geometries of mult holes nozzle by using CNG engine
by: Muhamad Akhbar Osman, Md. Hashim
Published: (2009)
by: Muhamad Akhbar Osman, Md. Hashim
Published: (2009)
Development of composite panels for short span bridge construction using indigenous agro - based resources: Fabrication and mechanical testing / Ahmad Hussein Abdul Hamid
by: Abdul Hamid, Ahmad Hussein
Published: (2005)
by: Abdul Hamid, Ahmad Hussein
Published: (2005)
Base pressure control by supersonic micro jets in a suddenly expanded nozzle
by: Khan, Sher Afghan, et al.
Published: (2018)
by: Khan, Sher Afghan, et al.
Published: (2018)
Analysis of parameters affecting thrust and base pressure in
suddenly expanded flow from nozzle
by: Pathan, Khizar Ahmed, et al.
Published: (2019)
by: Pathan, Khizar Ahmed, et al.
Published: (2019)
Effect Of Nozzle Rotation Angles And Sizes On Thermal Characteristic Of Swirl Anti-Icing
by: Ismail, Mohd Azmi
Published: (2018)
by: Ismail, Mohd Azmi
Published: (2018)
A study of the spray characteristic for valve covered orifice diesel nozzle injector using CFD
by: Ahmad Aizuddin Faiz, Che Jaafar
Published: (2013)
by: Ahmad Aizuddin Faiz, Che Jaafar
Published: (2013)
Modeling and simulation of the supersonic jet nozzle for oxygen injection system at electric arc furnace
by: Suhaimi, Mohd Sukri
Published: (2010)
by: Suhaimi, Mohd Sukri
Published: (2010)
CFD analysis of effect of flow and geometry parameters on thrust force created by flow from nozzle
by: Pathan, Khizer Ahmed, et al.
Published: (2017)
by: Pathan, Khizer Ahmed, et al.
Published: (2017)
Spall Behaviors of Metaconcrete: 3D Meso-Scale Modelling
by: Jin, H., et al.
Published: (2021)
by: Jin, H., et al.
Published: (2021)
Development Of A Meso-Scale Combustor For Liquid Fuel Combustion
by: Hamzah, Muhammad Al Amien
Published: (2018)
by: Hamzah, Muhammad Al Amien
Published: (2018)
Combined effect of nozzle pressure ratio and screech prone supersonic mach number in a suddenly expanded flow
by: Bashir, Musavir, et al.
Published: (2015)
by: Bashir, Musavir, et al.
Published: (2015)
3D meso-scale modelling of concrete material in spall tests
by: Chen, G., et al.
Published: (2015)
by: Chen, G., et al.
Published: (2015)
Meso-Scale Modelling Of Pultruded Hybrid Composite Under Impact Loading
by: Omar, Mohammad Shafiq
Published: (2022)
by: Omar, Mohammad Shafiq
Published: (2022)
Comparing Injecting Risk Behaviors of Long-Term Injectors with New Injectors in Tehran, Iran
by: Bazrafshan, M., et al.
Published: (2018)
by: Bazrafshan, M., et al.
Published: (2018)
Meso-scale rheological characteristics of foamed bitumen mixtures with high RAP content
by: Sanchez Melo, Diana B.
Published: (2018)
by: Sanchez Melo, Diana B.
Published: (2018)
Hydrodynamics investigations of kaffir lime leaves drying in a swirling solar drying chamber with inclined slotted angle air distributor
by: Muhammad Amirul Azwan, Azmi, et al.
Published: (2023)
by: Muhammad Amirul Azwan, Azmi, et al.
Published: (2023)
Control of suddenly expanded flows from correctly expanded and under expanded nozzles at supersonic mach number for area ratio 2.56
by: Bashir, Musavir, et al.
Published: (2016)
by: Bashir, Musavir, et al.
Published: (2016)
Experimental investigation of minimum quantity lubrication in meso-scale milling with varying tool diameter
by: Yusof, M. Q.M., et al.
Published: (2018)
by: Yusof, M. Q.M., et al.
Published: (2018)
Numerical simulation of spall tests on concrete material with 3D meso-scale model
by: Chen, G., et al.
Published: (2013)
by: Chen, G., et al.
Published: (2013)
Investigation of the Swirl Effect on Engine Using Designed Swirl Adapter
by: Mohiuddin, A. K. M.
Published: (2011)
by: Mohiuddin, A. K. M.
Published: (2011)
Numerical Analysis Of Swirl Intensity In Turbulent Swirling Pipe Flows
by: Tamrin, K. F., et al.
Published: (2016)
by: Tamrin, K. F., et al.
Published: (2016)
High Thrust Density Transverse Flux Linear Motor: Thrust Analysis and Driving Method.
by: Misron, Norhisam, et al.
Published: (2011)
by: Misron, Norhisam, et al.
Published: (2011)
Development of the premixing injector in burner system
by: Sies, Mohamad Farid
Published: (2013)
by: Sies, Mohamad Farid
Published: (2013)
Meso-scale defect evaluation of selective laser melting using spatially resolved acoustic spectroscopy
by: Hirsch, Matthias, et al.
Published: (2017)
by: Hirsch, Matthias, et al.
Published: (2017)
Experimental investigation of the swirl effect on CAMPRO engine using designed swirl adapter
by: Mohiuddin, A. K. M., et al.
Published: (2011)
by: Mohiuddin, A. K. M., et al.
Published: (2011)
Impact of Floor Area Ratio (FAR) on energy consumption at meso scale in China: case study of Ningbo
by: Dawodu, Ayotunde, et al.
Published: (2017)
by: Dawodu, Ayotunde, et al.
Published: (2017)
Studies on the effect of swirl intensity and fuel mixtures on combustion and flame characteristics of swirl burner
by: Abdul Wahid, Mazlan, et al.
Published: (2006)
by: Abdul Wahid, Mazlan, et al.
Published: (2006)
Optimization of EDM parameters for micro/meso fabrication
by: Ali, Mohammad Yeakub, et al.
Published: (2006)
by: Ali, Mohammad Yeakub, et al.
Published: (2006)
Thermal noise generator and injector circuit for data encryption
by: Khan, Sheroz, et al.
Published: (2010)
by: Khan, Sheroz, et al.
Published: (2010)
Rapid premixing fuel-water injector in burner combustion
by: Suardi, Mirnah
Published: (2016)
by: Suardi, Mirnah
Published: (2016)
Rapid premixing fuel-water injector in burner combustion
by: Suardi, Mirnah
Published: (2015)
by: Suardi, Mirnah
Published: (2015)
Similar Items
-
Swirl flow in combustion chambers
by: Mohammed, Akmal Nizam
Published: (2008) -
Numerical investigation of the deposit effect on GDI injector nozzle flow
by: Wang, Bo, et al.
Published: (2017) -
CFD analysis of the supersonic nozzle flow with sudden expansion
by: Ahmed, Khizar Pathan, et al.
Published: (2016) -
Optimization of area ratio and thrust in suddenly expanded flow at supersonic Mach numbers
by: Pathan, Khizer Ahmed, et al.
Published: (2018) -
Conceptual development of a pressure-swirl injector for a two-stroke GDI engine
by: Abdul Aziz, Azhar, et al.
Published: (2006)