Parametric optimization and modeling for flank wear of TiSiN-TiAlN Nanolaminate Cutting Insert / M. Kaladhar

QR Code

Parametric optimization and modeling for flank wear of TiSiN-TiAlN Nanolaminate Cutting Insert / M. Kaladhar

Selection of machining parameters and better prediction for cutting tool flank wear is indispensable in hard machining as flank wear is directly influences the quality of machined surface. In the current study, parametric optimization and predictive model were carried out for the flank wear of TiSiN...

Full description

Bibliographic Details
Main Author:	M., Kaladhar
Format:	Article
Language:	English
Published:	Faculty of Mechanical Engineering Universiti Teknologi MARA (UiTM) 2020
Subjects:	TJ Mechanical engineering and machinery
Online Access:	https://ir.uitm.edu.my/id/eprint/36588/

Similar Items

Application of ANFIS in predicting TiAlN coatings flank wear
by: Hasan Basari, Abd Samad, et al.
Published: (2011)

Tool wear analysis in end milling of advanced ceramics with TiAlN and TiN coated carbide inserts
by: Reddy, M. Mohan, et al.
Published: (2012)

Tool wear analysis in end milling of advanced ceramics with TiAlN and TiN coated carbide inserts
by: Moola, Mohan, et al.
Published: (2012)

Corrosion behaviour of nanocomposite TiSiN coatings on steel substrates
by: Ahmed, M., et al.
Published: (2011)

Machinability of Aluminum Nitride Ceramic using TiAlN and TiN Coated Carbide Tool Insert
by: Moola, M., et al.
Published: (2014)

Application of fuzzy rule-based model in predicting flank wear of TiAlN coatings in PVD magnetron sputtering process
by: Mohamad Jaya, Abdul Syukor, et al.
Published: (2011)

Tool wear of DLC coating as top-layered to CrN, TiAlSiN, TiAlN coatings in machining of steel and aluminum alloys
by: Ibrahim, M. S., et al.
Published: (2024)

Effects of TiN single layer coating on the wear of ZTA cutting inserts and surface roughness of workpiece
by: Ahmad Azhar, Ahmad Zahirani, et al.
Published: (2017)

Application of ANFIS in Predicting of TiAlN Coatings Hardness
by: Mohamad Jaya, Abdul Syukor, et al.
Published: (2011)

Application of ANFIS in Predicting of TiAlN Coatings Hardness
by: Mohamad Jaya, Abdul Syukor, et al.
Published: (2011)

Comparative study between wear of uncoated and TiAlN-coated carbide tools in milling of Ti6Al4V
by: Uddin, M., et al.
Published: (2017)

Cutting performance of advanced multilayer coated (TiAlN/AlCrN) in machining of AISI D2 hardened steel
by: Jasni, Nur Akmal Hakim
Published: (2013)

Hybrid RSM-fuzzy modeling for hardness prediction of TiAlN coatings
by: Jaya, A. S. M, et al.
Published: (2011)

Investigation on machining performance of TiB2 and TiN coatings with modified cutting insert in AISI 1017 turning
by: Amirul, Zainal, et al.
Published: (2020)

Influence of oil-based and water-based lubrication on tool wear of DLC/TiAlN-coated punches in blanking of stainless steel
by: Ibrahim, Muhammad Shuhaimi, et al.
Published: (2025)

Milling of carbon fibre reinforced polymer (CFRP) using TiAlN coated end mills
by: Konneh, Mohamed, et al.
Published: (2014)

Study of TiC cutting tool insert using microwave synthesis
by: Thauri, Shahdura Hammad, et al.
Published: (2011)

Progressive Tool Flank Wear And Surface Roughness When Turning AISI 1017 Mild Steel Using Reduced Thickness Inserts In Finishing Cutting Conditions
by: S. A., Che Ghani, et al.
Published: (2017)

Investigation of wear behavior of cutting tool insert for ti-alloy machining using carbon coated with sic sandblasting and hf acid pretreatment
by: Mohd Izul Aslam, Mohd Khalit
Published: (2012)

Development of tool life prediction model of TiAlN coated tools during the high speed hard milling of AISI H13 steel
by: Amin, A. K. M. Nurul, et al.
Published: (2011)

Microstructural characterisation of TiAlTiAu and TiAlPdAu ohmic contacts to AlGaN/GaN
by: Fay, Mike W., et al.
Published: (2001)

A comparative study on flank wear of ceramic and Tungsten carbide inserts during high speed machining of stainless steel
by: Khan, Ahsan Ali, et al.
Published: (2018)

Flank wear modeling in high speed turning
by: Al Hazza, Muataz Hazza Faizi, et al.
Published: (2009)

Wear mechanism of TC4 titanium alloy with TiN coating against self-lubricating fabric
by: Zhao, Song, et al.
Published: (2023)

Tool life of TiAlN PVD coated carbide tool in high-speed end milling of untreated inconel 718 under minimum quantity lubrication condition
by: Kasim, M.S., et al.
Published: (2013)

The flank wear optimisation of 316 Stainless Steel using response surface method in dry-down milling using carbide insert
by: Nurul Hidayah, Razak, et al.
Published: (2022)

Machinability performance of Al–NiTi and Al–NiTi–nano SiC composites with parametric optimization using GSA
by: Mokkandi, Purusothaman, et al.
Published: (2017)

Phase and thermal stability in Ti3SiC2 and Ti3SiC2/TiC/TiSi2 systems
by: Pang, Wei Kong, et al.
Published: (2012)

Wear analysis of Silicon Nitride (Si3N4) cutting tool in dry machining of T6061 Aluminium Alloy
by: Mohamed Ariff, Tasnim Firdaus, et al.
Published: (2013)

Experimental Investigation of Flank Wear in end Milling of Aluminum Alloy with Water-Based TiO2 Nanofluid Lubricant in Minimum Quantity Lubrication Technique
by: Najiha, M. S., et al.
Published: (2016)

High-temperature thermal stability of Ti2AlN and Ti4AlN3: A comparative diffraction study
by: Low, It-Meng (Jim), et al.
Published: (2011)

An experimental study to evaluate the flank wear interaction with process parameters during machining of aluminium alloy under minimum quantity lubrication with TiO2 nanofluid
by: M. S., Najiha, et al.
Published: (2019)

Characterization Of Ti/TiN/AlCu Film Stack Prepared By Physical Vapor Deposition
by: Leow, Mun Tyng
Published: (2012)

Diffraction Study on the Thermal Stability of Ti3SiC2/TiC/TiSi2 Composites in Vacuum
by: Pang, Wei Kong, et al.
Published: (2010)

Effect of Vacuum Annealing on the Thermal Stability of Ti3SiC2/TiC/TiSi2 Composites
by: Pang, W, et al.
Published: (2009)

Scratch Adhesion and Wear Failure Characteristics of PVD multilayer CrTi/CrTiN Thin Film Ceramic Coating Deposited on AA7075-T6 Aerospace Alloy
by: Quazi, M. M., et al.
Published: (2018)

High wear Resistant Ceramic Cutting inserts With Enhanced Toughness For High-Speed Machining
by: Ahmad, Zainal Arifin, et al.
Published: (2016)

Growth, Characterization And Thermal Stability Of AlN/Ti/AlN/SiO2 Multilayered Selective Solar Absorber Coating For High Temperature Applications
by: Bello, Mutawalli, et al.
Published: (2020)

Surface roughness study of milled carbon fiber reinforced polymer (CFRP) composite using 4 mm 2-flute titanium aluminum nitride (TiAlN) coated carbide end mills
by: Konneh, Mohamed, et al.
Published: (2014)

Forced convection heat transfer performance of TiO2-SiO2 nanofluids with wire coil inserts
by: Khamisah, Abdul Hamid
Published: (2019)