Fabrication of semi-metallic brake friction materials using kenaf powder and activated carbon from palm kernel shell through powder metallurgy process / Mohammad Hairul Amri Mohad Yunus

QR Code

Fabrication of semi-metallic brake friction materials using kenaf powder and activated carbon from palm kernel shell through powder metallurgy process / Mohammad Hairul Amri Mohad Yunus

Local materials are widely investigated by researchers to study their capabilities to replace commercial materials in fabrication of brake friction material. This is to reduce the materials cost and it affects to the environment. Therefore, this work is to study the capability of kenaf powder and ac...

Full description

Bibliographic Details
Main Author:	Mohad Yunus, Mohammad Hairul Amri
Format:	Student Project
Language:	English
Published:	2016
Subjects:	Mechanics of engineering. Applied mechanics Applied dynamics
Online Access:	https://ir.uitm.edu.my/id/eprint/35068/

Similar Items

Optimization of copper based powder metallurgy brake friction materials / Muhammad Nasri Jamaludin
by: Jamaludin, Muhammad Nasri
Published: (2016)

On-Road Braking Performances of Semi-Metallics Brake Friction Materials Developed through Powder Metallurgy Process
by: Jaafar, Talib Ria, et al.
Published: (2016)

Post impact fatigue of kenaf powder, PP, MAPP laminated with kevlar hybrid composites / Siti Norain Manan.
by: Manan, Siti Norain
Published: (2009)

Performance of finger joint from Sepetir / Yuhanis Yunus
by: Yunus, Yuhanis
Published: (2015)

Overview of the powder metallurgy process
by: Hrairi, Meftah, et al.
Published: (2011)

Characteristics of amorphous Al65Cu35 binary alloy and Al65Cu35-XTiX ternary alloys prepared by mechanical alloying of elemental powder / Rosedhila Ramli
by: Ramli, Rosedhila
Published: (2006)

Development of fuzzy logic controller for magnetorheological rotary brake system
by: Rashid, Muhammad Mahbubur, et al.
Published: (2009)

Synthesis of carbides compounds from elemental powder by mechanical milling / Aznifa Mahyam Zaharudin, Rizal Mohamaed Noor and Rasdi Deraman
by: Zaharudin, Aznifa Mahyam, et al.
Published: (2005)

Q-switching and mode-locking pulse generation based on passive techniques / Amri Ab. Rahman
by: Ab. Rahman, Amri
Published: (2015)

Determination of mechanical and chemical properties of brake pads for Light Rail Transit applications / Mohamad Nor Berhan and Darius Gnanaraj Solomon
by: Berhan, Mohamad Nor, et al.
Published: (2007)

An investigation on parking facilities at the public and private hospital in Klang Valley / Hairul Amri Bin Shamsuddin
by: Shamsuddin, Hairul Amri
Published: (2015)

Tsunami risk scalar determination on Northern Coastal Region of Peninsula Malaysia / Hairul Izwan Amri
by: Amri, Hairul Izwan
Published: (2006)

Performance of floating semi rigid pulverized fly ash stone column / Nazaruddin Abdul Taha
by: Abdul Taha, Nazaruddin
Published: (2018)

Thermal behaviour of brake pad light rail transit / Mohd Zaki Bahrom
by: Bahrom, Mohd Zaki
Published: (2009)

Investigation on the effect of Kenaf dust on mechanical properties of automotive brake pad / Ruzanna Inani Zaharim
by: Zaharim, Ruzanna Inani
Published: (2010)

Evaluation of friction welded bi-material joint strength subjected to impact loads
by: Shah, Qasim Hussain, et al.
Published: (2011)

A new design of automatic hanging system / Mohd fIkri Abd Halim
by: Abd Halim, Mohd fIkri
Published: (2009)

Effects of sintering schedule to the characteristics of FeCrAl powder compacts formed at elevated temperature
by: Rahman, Md Mujibur, et al.
Published: (2018)

Mechanical and Tribological Behavior of Powder Metallurgy Processed Aluminum-Graphite Composite
by: Norul Amierah, Nor Zamani, et al.
Published: (2019)

Dynamics and control policies analysis of semi-active suspension systems using a full-car model
by: Ihsan, Sany Izan, et al.
Published: (2007)

An analysis of stress over riveted repair on a stiffened panel / Ramyzan Ramly and Wahyu Kuntjoro
by: Ramly, Ramyzan, et al.
Published: (2005)

Multi display scan in detecting weld discontinuity of thick carbon steel plate using ultrasonic testing phased array (UTPA) with comparison to conventional ultrasonic testing (UT) / Jeffry Jamil, Syed Yusainee Syed Yahya and Rosnah Zakaria
by: Jamil, Jeffry, et al.
Published: (2020)

Evaluation of initiative by UiTM as a sustainable campus: energy / Nur Farahin Azhar
by: Azhar, Nur Farahin
Published: (2013)

IOT-Based automated feeding fish system using : NodeMCU / Afandi Asqalani Abdul Azis
by: Abdul Azis, Afandi Asqalani
Published: (2020)

The design and fabrication of a free flowing water turbine for UiTM-PERHILITAN Research Center Taman Negara / Muhammad Zul Hilmi Asmad.
by: Asmad, Muhammad Zul Hilmi
Published: (2009)

Computational fluid dynamics (CFD) analysis of a blended wing body (BWB) unmanned aerial vehicle (UAV) with elevator deflection of - 15° (upward) at 0.1 and 0.3 mach number / Mohd. Fazil Jundam
by: Jundam, Mohd. Fazil
Published: (2009)

Synthesis and characterization of NiFeMo alloy / Ahmad Safuan Abu Talib
by: Abu Talib, Ahmad Safuan
Published: (2010)

Finite element analysis of proximal femur using Charnley elite type stem / Muhamad Zaidi Salem.
by: Salem, Muhamad Zaidi
Published: (2009)

Recent progress on the corrosion characterization of magnesium (Mg) prepared by powder metallurgy technique
by: M. A. F., Romzi, et al.
Published: (2021)

Production of aluminium reinforced with SiC particulates using powder metallurgy
by: Nimir, Yassin Lutfi Mahmud
Published: (2011)

Comparison of Thermal Comfort Condition of Naturally Ventilated Courtyard, Semi-Outdoor and Indoor Air Conditioned Spaces in Tropical Climate
by: Allah, Mohammad Zaraa, et al.
Published: (2023)

Helmet towards SIRIM safety mark qualifications / Zulkefli Yusoff
by: Yusoff, Zulkefli
Published: (2003)

Rheological and mechanical properties of Yttria Stabilized Zirconia (YSZ) produced by ceramic injection moulding / Mahfuzah Zainudin
by: Zainudin, Mahfuzah
Published: (2017)

Numerical analysis on the effect of built form in urban ventilation assessment / Mohd Azhari Mohd Rodzi
by: Mohd Rodzi, Mohd Azhari
Published: (2016)

Transfer matrix method for identifying the dynamic characteristics of an exhaust system / Muhamad Norhisham Abdul Rani
by: Abdul Rani, Muhamad Norhisham
Published: (2008)

Merekabentuk dan fabrikasi klip gauge untuk ujian dinamik dan keretakan / Norhisham Idris
by: Idris, Norhisham
Published: (1996)

Dynamic characterization of Laminated Kenaf Fiber Composites with Delamination using Experimental Modal Analysis / Asymawi Abd Aziz
by: Abd Aziz, Asymawi
Published: (2010)

Post impact fatigue of fibre metal laminate (FML) / Abdul Adzim Abdul Mubin.
by: Abdul Mubin, Abdul Adzim
Published: (2009)

CFD and wind tunnel testing for a rear car spoiler / Ahmad Azlan Asri
by: Asri, Ahmad Azlan
Published: (2010)

Computer simulation and turbine development for free flowing water generator / Mohd Ridhwan Hizami Abd Rashid
by: Abd Rashid, Mohd Ridhwan Hizami
Published: (2010)