Performance of finger joint from Sepetir / Yuhanis Yunus

QR Code

Performance of finger joint from Sepetir / Yuhanis Yunus

This study was conducted to evaluate the effects of pressure on performance of the finger joint. The wood species studied were sepetir (sindofa spp) and adhesives were poly (vinyl acetate) (PVAc).However, there is little information available concerning the bending strength and modulus of elastic...

Full description

Bibliographic Details
Main Author:	Yunus, Yuhanis
Format:	Student Project
Language:	English
Published:	Faculty Of Applied Sciences 2015
Subjects:	Mechanics of engineering. Applied mechanics Materials of engineering and construction
Online Access:	https://ir.uitm.edu.my/id/eprint/22837/

Similar Items

Properties of finger jointing effect by adhersive types on three different species / Mohd Khaidir Mohd Nor
by: Mohd Nor, Mohd Khaidir
Published: (2013)

Fabrication of semi-metallic brake friction materials using kenaf powder and activated carbon from palm kernel shell through powder metallurgy process / Mohammad Hairul Amri Mohad Yunus
by: Mohad Yunus, Mohammad Hairul Amri
Published: (2016)

Mechanical properties of finger joint from acacia manglum spp by adhesive types and tree portion / Umar Khattab Jamal
by: Jamal, Umar Khattab
Published: (2013)

Adhesion of nc lacquer on 3 different sanded surfaces of Kelempayan timber / Radhiah Abd Aziz
by: Abd Aziz, Radhiah
Published: (2015)

Effect of lateral load due to wind and seimic loading to tall building in Malaysia / Siti Nor Marlina Che Hamipah
by: Che Hamipah, Siti Nor Marlina
Published: (2007)

History of metallurgical development of boat propeller and keris (a comparison) / Yusniza Yem
by: Yem, Yusniza
Published: (2002)

Fracture behaviour of different volume fraction of alumina (AI₂O₃) reinforcement metal matrix composite / Junaidah Jai
by: Jai, Junaidah
Published: (2005)

Mechanical properties of tire replaced concrete / Khadijah Hamzah
by: Hamzah, Khadijah
Published: (2007)

Solder joint reliability assessment: finite element simulation methodology
by: Tamin, M.N., et al.
Published: (2014)

Fatigue fracture process of lead-free solder joints in BGA package
by: Tamin, M.N., et al.
Published: (2012)

Initial and progressive failure analysis of a composite wing spar structure / Bruce Ralphin Rose.J and Priyadharshini.S
by: Bruce, Ralphin Rose.J, et al.
Published: (2017)

Fabrication of nanocomposited Sn-doped ZnO/TiO₂ based dye-sensitized solar cells / Saurdi Ishak
by: Ishak, Saurdi
Published: (2018)

Damage mechanics model for solder/intermetallics interface fracture process in solder joints
by: Shaffiar, Norhashimah, et al.
Published: (2011)

Damage progression in BGA solder joints during board-level drop test
by: Yamin, A.F.M., et al.
Published: (2011)

Continuum damage evolution in pb-free solder joint under shear fatigue loadings
by: Shaffiar, Norhashimah, et al.
Published: (2010)

Bearing stresses in bolted composite joints with different contact interactions
by: Ahmad, Hilton
Published: (2016)

Experimental investigation of woven fabric cfrp bolted joints: parametric study
by: Ahmad, Hilton
Published: (2016)

XFEM modelling in multi-bolted joints using a unified bolt preload
by: Supar, Khairi, et al.
Published: (2019)

Development of a gearing mechanism for a robotic finger / Hamzah Ab Wahab
by: Ab Wahab, Hamzah
Published: (2011)

Progressive damage in Sn-4Ag-0.5Cu solder joints during flexural fatigue of a BGA package
by: Shaffiar, Norhashimah, et al.
Published: (2010)

Optimization of copper based powder metallurgy brake friction materials / Muhammad Nasri Jamaludin
by: Jamaludin, Muhammad Nasri
Published: (2016)

XFEM modelling of single-lap Kenaf fibre composite hybrid joints under quasi-static loading
by: Lee, Sim Yee, et al.
Published: (2019)

2-D strength prediction of single-row multi-bolted joints woven fabric kenaf composites
by: Supar, Khairi, et al.
Published: (2018)

Effect of Numbers of Fringing Electric Field (FEF) Fingers on the Performance of Sensor for Water Content in Soil
by: Azman, Mohd Farizul, et al.
Published: (2013)

Effects of sintering schedule to the characteristics of FeCrAl powder compacts formed at elevated temperature
by: Rahman, Md Mujibur, et al.
Published: (2018)

The effect of replacement of natural sand by manufactured sand on the properties of the concrete
by: Nadimalla, Altamashuddinkhan, et al.
Published: (2019)

Compressive strength and microstructure analysis of treated rice husk ash (TRHA) incorporated mortar
by: Saad, Siti Asmahani, et al.
Published: (2018)

Experimental and numerical study of compression after impact of sandwichs structures with metallic skins
by: Aminanda, Yulfian, et al.
Published: (2009)

Core crush criterion to determine the strength of sandwich composite structures subjected to compression after impact
by: Castanie, Bruno, et al.
Published: (2008)

Experimental study and numerical modelling of woven fabric kenaf fiber composites hybrid adhesively bonded-bolted joints
by: Lee, Sim Yee
Published: (2018)

Anisotropic Shear Behavior Of Jointed Rock Masses At Ulu Jelai Hydroelectric Project, Pahang
by: Sapari, Nur Khafiza
Published: (2018)

Mechanical And Tribological Properties Of Ultra High Molecular Weight Polyethylene With Zinc Oxide Antibacterial Agent For Joint Implant
by: Chang, Boon Peng
Published: (2014)

Impact performance of glass fibre/epoxy composite material / Fahizi Ibrahim
by: Ibrahim, Fahizi
Published: (2002)

Stress intensity factors of edge cracks in dissimilar joint plates
by: Nik Ismail, Nik Ainun
Published: (2014)

The development of a financial model to predict business performance of IBS construction company based on selected financial ratios / Norazuaniza Mohd Yunus
by: Mohd Yunus, Norazuaniza
Published: (2015)

Stress distribution of secondary bending in single-lap bolted joints with dissimilar joining plates and plate types
by: Ahmad, Hilton
Published: (2016)

An analysis of stress over riveted repair on a stiffened panel / Ramyzan Ramly and Wahyu Kuntjoro
by: Ramly, Ramyzan, et al.
Published: (2005)

Multi display scan in detecting weld discontinuity of thick carbon steel plate using ultrasonic testing phased array (UTPA) with comparison to conventional ultrasonic testing (UT) / Jeffry Jamil, Syed Yusainee Syed Yahya and Rosnah Zakaria
by: Jamil, Jeffry, et al.
Published: (2020)

Evaluation of initiative by UiTM as a sustainable campus: energy / Nur Farahin Azhar
by: Azhar, Nur Farahin
Published: (2013)

IOT-Based automated feeding fish system using : NodeMCU / Afandi Asqalani Abdul Azis
by: Abdul Azis, Afandi Asqalani
Published: (2020)