Adhesion of nc lacquer on 3 different sanded
surfaces of Kelempayan timber / Radhiah Abd Aziz

QR Code

Adhesion of nc lacquer on 3 different sanded surfaces of Kelempayan timber / Radhiah Abd Aziz

This research project was carried out to determine the adhesion lacquer on sanded surface of timber. Kelempayan timber was used for this purpose. 3 types of grit of sand paper had been use. Timber prepared to moisture content 12%. Cross cut test were applied based ASTM D3359 09'2. Result sh...

Full description

Bibliographic Details
Main Author:	Abd Aziz, Radhiah
Format:	Student Project
Language:	English
Published:	Faculty Of Applied Sciences 2015
Subjects:	Mechanics of engineering. Applied mechanics Materials of engineering and construction
Online Access:	https://ir.uitm.edu.my/id/eprint/22834/

Similar Items

The effect of replacement of natural sand by manufactured sand on the properties of the concrete
by: Nadimalla, Altamashuddinkhan, et al.
Published: (2019)

A new design of automatic hanging system / Mohd fIkri Abd Halim
by: Abd Halim, Mohd fIkri
Published: (2009)

Dynamic characterization of Laminated Kenaf Fiber Composites with Delamination using Experimental Modal Analysis / Asymawi Abd Aziz
by: Abd Aziz, Asymawi
Published: (2010)

Improvement of adhesive toughness measurement
by: Meng, Qingshi, et al.
Published: (2011)

Initial and progressive failure analysis of a composite wing spar structure / Bruce Ralphin Rose.J and Priyadharshini.S
by: Bruce, Ralphin Rose.J, et al.
Published: (2017)

Fabrication of nanocomposited Sn-doped ZnO/TiO₂ based dye-sensitized solar cells / Saurdi Ishak
by: Ishak, Saurdi
Published: (2018)

Properties of finger jointing effect by adhersive types on three different species / Mohd Khaidir Mohd Nor
by: Mohd Nor, Mohd Khaidir
Published: (2013)

Performance of finger joint from Sepetir / Yuhanis Yunus
by: Yunus, Yuhanis
Published: (2015)

Effect of lateral load due to wind and seimic loading to tall building in Malaysia / Siti Nor Marlina Che Hamipah
by: Che Hamipah, Siti Nor Marlina
Published: (2007)

History of metallurgical development of boat propeller and keris (a comparison) / Yusniza Yem
by: Yem, Yusniza
Published: (2002)

Hardness and adhesion performances of nanocoating on carbon steel
by: J. N., Hasnidawani, et al.
Published: (2018)

Fracture behaviour of different volume fraction of alumina (AI₂O₃) reinforcement metal matrix composite / Junaidah Jai
by: Jai, Junaidah
Published: (2005)

Evaluation of fatigue damage in adhesive bonding: Part 1: Bulk adhesive
by: Wahab, Magd Abdel, et al.
Published: (2010)

Determination of charring rates of laminated veneer lumber made from selected Malaysian tropical timber exposed under standard fire exposure / Zulhazmee Bakri
by: Bakri, Zulhazmee
Published: (2020)

Structural behaviour of reinforced expanded polystyrene steel fibre lightweight concrete (EPSF-LWC) wall panel with opening under axial load / Jamilah Abd Rahim
by: Abd Rahim, Jamilah
Published: (2018)

Notched impact strength of fibre - reinforced polymer (FRP) composites / Azlira Abdul Aziz
by: Abdul Aziz, Azlira
Published: (2005)

Mechanical properties of tire replaced concrete / Khadijah Hamzah
by: Hamzah, Khadijah
Published: (2007)

Study Of Adhesion Properties Of Natural Rubber, Epoxidized Natural Rubber, And Ethylene-Propylene Diene Terpolymer-Based Adhesives [TA455.R8 K98 2007 f rb].
by: Kwo, Han Kiu
Published: (2007)

Investigation the effect of expanded graphite modification on tensile properties and adhesive of epoxy composite
by: Che Berhanuddin, Nurul Idani
Published: (2018)

Investigation Of Adhesion Between Microwave Plasma Treated Epoxy And Silicone
by: Choong, Lai Fan
Published: (2020)

Fabrication of semi-metallic brake friction materials using kenaf powder and activated carbon from palm kernel shell through powder metallurgy process / Mohammad Hairul Amri Mohad Yunus
by: Mohad Yunus, Mohammad Hairul Amri
Published: (2016)

Effect of surface roughness on adhesion strength in ultrasonic soldering of glass
by: Mohd. Yusry, Mustafa, et al.
Published: (2015)

An analysis of stress over riveted repair on a stiffened panel / Ramyzan Ramly and Wahyu Kuntjoro
by: Ramly, Ramyzan, et al.
Published: (2005)

Multi display scan in detecting weld discontinuity of thick carbon steel plate using ultrasonic testing phased array (UTPA) with comparison to conventional ultrasonic testing (UT) / Jeffry Jamil, Syed Yusainee Syed Yahya and Rosnah Zakaria
by: Jamil, Jeffry, et al.
Published: (2020)

Evaluation of initiative by UiTM as a sustainable campus: energy / Nur Farahin Azhar
by: Azhar, Nur Farahin
Published: (2013)

IOT-Based automated feeding fish system using : NodeMCU / Afandi Asqalani Abdul Azis
by: Abdul Azis, Afandi Asqalani
Published: (2020)

The design and fabrication of a free flowing water turbine for UiTM-PERHILITAN Research Center Taman Negara / Muhammad Zul Hilmi Asmad.
by: Asmad, Muhammad Zul Hilmi
Published: (2009)

Computational fluid dynamics (CFD) analysis of a blended wing body (BWB) unmanned aerial vehicle (UAV) with elevator deflection of - 15° (upward) at 0.1 and 0.3 mach number / Mohd. Fazil Jundam
by: Jundam, Mohd. Fazil
Published: (2009)

Synthesis and characterization of NiFeMo alloy / Ahmad Safuan Abu Talib
by: Abu Talib, Ahmad Safuan
Published: (2010)

Finite element analysis of proximal femur using Charnley elite type stem / Muhamad Zaidi Salem.
by: Salem, Muhamad Zaidi
Published: (2009)

Fabrication And Characterization Of Eco-Friendly Denture Adhesive Filled With Starches For Dental Application
by: Hilmi, Bazli
Published: (2020)

Development of STEP-NC based machining system for machining process information flow
by: Kassim, Noordiana, et al.
Published: (2013)

Characterization And Pretreatment For Silica Sand In Removing The Associated Mineral
by: Ruslan, Muhammad Nadzmi
Published: (2017)

Experimental study and numerical modelling of woven fabric kenaf fiber composites hybrid adhesively bonded-bolted joints
by: Lee, Sim Yee
Published: (2018)

Computer simulation and turbine development for free flowing water generator / Mohd Ridhwan Hizami Abd Rashid
by: Abd Rashid, Mohd Ridhwan Hizami
Published: (2010)

The stiffness and strength degradation of timber concrete composite slab deck under repeated loading
by: Yeo, Kevin Jit Tong
Published: (2021)

Mechanical and durability properties of sand cement brick containing recycled concrete aggregate and crumb rubber as partial sand replacement material
by: Aminuddin, Mohamad Yuzwan Aliff
Published: (2021)

Optimization of copper based powder metallurgy brake friction materials / Muhammad Nasri Jamaludin
by: Jamaludin, Muhammad Nasri
Published: (2016)

Utilization of coal bottom ash and fine coconut shell as partial sand replacement in concrete
by: Mazenan, Puteri Natasya
Published: (2019)

Performance of composite sand cement brick containing recycled concrete aggregate and waste polyethylene terepthalate
by: Azmi, Nurul Bazilah
Published: (2018)