Effect of tool path and feed rate on the machining of coons surfaces / Boppana V. Chowdary and Anton Gittens

QR Code

Effect of tool path and feed rate on the machining of coons surfaces / Boppana V. Chowdary and Anton Gittens

In this study, complex shapes are defined as the sculptured surfaces created by the blending of curves, to form surface patches. Past investigations show that non-uniform rational B-Splines (NURBS) curves are the most appropriate for the modeling of sculptured surfaces. The main objective of this re...

Full description

Bibliographic Details
Main Authors:	Boppana V. Chowdary, Anton Gittens
Format:	Article
Language:	English
Published:	Faculty of Mechanical Engineering Universiti Teknologi MARA (UiTM) 2017
Online Access:	https://ir.uitm.edu.my/id/eprint/17618/

Similar Items

Some slicing issues in rapid prototyping / Boppana Veeraiah Chowdary and Divesh R. Sahatoo
by: Chowdary, Boppana Veeraiah, et al.
Published: (2011)

An investigation into the Metal Grinding Process under Sub-Zero Temperature Cutting Fluid / Richard P. Daisley and Boppana V. Chowdary
by: Richard, P. Daisley, et al.
Published: (2011)

Optimisation of surface roughness when CNC Turning of Al-6061: Application of Taguchi Design of experiments and genetic algorithm / Boppana V. Chowdary...[et al.]
by: V. Chowdary, Boppana, et al.
Published: (2019)

An integrated approach towards achieving agility in design and development of a broken free-form object / Fahraz Ali and Boppana V. Chowda
by: Ali, Fahraz, et al.
Published: (2011)

Anton Piller Order: its growth and development / Abd Karim Rahman Hamzah
by: Rahman Hamzah, Abd Karim
Published: (1983)

Modeling and Cohen Coon Control of a Non-interacting Tanks in Series
by: Mohamed Ramli, Nasser
Published: (2005)

Comparison between ziegler-nichols and cohen-coon method for controller tunings
by: Mohd Fadzli, Mohd Noris
Published: (2006)

Comparative study of tool path strategies in CNC machining for part with B-spline surfaces
by: Zainal Fahmi, Zainol Abidin, et al.
Published: (2020)

Optimization of tool path parameter for machining of free form surface profile of pre harden steel
by: Siti Aishah, Arman
Published: (2016)

Computer aided engineering approach to the development of a lawnmower blade: a reverse engineering application to reduce noise levels / Trishel Gokool … [et al.]
by: Gokool, Trishel, et al.
Published: (2015)

Effect of High-Speed Milling Tool Path Strategies on the Surface Roughness of Stavax ESR Mold Insert Machining
by: Mebrahitom, A., et al.
Published: (2016)

Effect of rake angle and feed rate on tool wear and surface topography for different chip size in machining carbon steels
by: Mohd Fawzi, Zamri, et al.
Published: (2022)

Influences of Varying Combination of Feed Rate and Depth of Cut to Tool Wear Rate and Surface Roughness: High Speed Machining Technique in Non-High Speed Milling Machine
by: Mohd Zairulnizam, Mohd Zawawi, et al.
Published: (2014)

Path planning and parameter optimization of uniform removal in active feed polishing
by: Liu, Jian, et al.
Published: (2015)

Develpoment of combinatorial optimisation for cutting tool path strategy
by: Alsultaney, Hazem K., et al.
Published: (2009)

Investigation of Surface Roughness and Tool Wear Length With Varying Combination of Depth of Cut and Feed Rate of Aluminium Alloy and P20 Steel Machining
by: Madan Varmma, Suparmaniam, et al.
Published: (2016)

Development of automatic feeding machine for aquaculture industry
by: Yeoh, S. J., et al.
Published: (2010)

Effects of tool path strategies on surface roughness in high speed milling
by: Abdul Rashid, Muhammad
Published: (2012)

Software Modification in a Fault Analysis Tool for Critical Path Debugging
by: Han, Chung Dean
Published: (2009)

An experimental validation and optimisation tool path strategy for thin walled structure
by: Alsultaney, Hazem K., et al.
Published: (2011)

Tool path generation of contour parallel based on ant colony optimisation
by: Abdullah, Haslina, et al.
Published: (2016)

Investigation of tool wear and surface integrity on MQL machining of Ti-6AL-4V using biodegradable oil
by: Rahim, E. A., et al.
Published: (2011)

Optimization of Machining Parameters on Tool Wear Rate of Ti-6Al-4V through EDM using Copper Tungsten Electrode A Statistical Approach
by: M. M., Rahman, et al.
Published: (2011)

Effect of rake angle and feed rate on wear and roughness in machining carbon steel 1045
by: Zamri, Mohd Fawzi, et al.
Published: (2020)

Effect of rake angle and feed rate on chip segmentation in machining carbon steel 1050
by: Mohd Fawzi, Zamri, et al.
Published: (2018)

Tool path cutting strategy for milling aircraft components using aluminium 7050
by: Alsultaney, Hazem K.
Published: (2010)

Effect of contour interval on minimization of tool path length in pocket milling process
by: Abdullah, Haslina, et al.
Published: (2020)

Optimizing multi-machine path planning for crop precision seeding with Lovebird Algorithm
by: Utamima, A., et al.
Published: (2025)

Influence of varying depth of cut and feed rate to tool wear rate and surface roughness in aluminium, mild steel and P20 tool steel
by: Nadirah, Ismail
Published: (2012)

Cutting force and tool life models in end milling titanium alloy ti-4al-4v with thermally-assisted machining
by: Ginta, Turnad Lenggo, et al.
Published: (2012)

Machining and Tool Wear Mechanisms during Machining Titanium Alloys
by: Islam, Mohammad Nazrul, et al.
Published: (2013)

Path towards an attainable quality : the effect of tooling design on the product competency and process efficiency
by: Tamilarasi, Arasu
Published: (2023)

Minimization of tool path length of drilling process using particle swarm optimization (PSO)
by: Abdullah, Haslina, et al.
Published: (2020)

Performance of diamond tool in machining titanium
by: Ahmad Nazmi, Mohd Rose
Published: (2010)

Effect of dry machining on tool wear
by: Madihah, Zubir
Published: (2012)

Content comparative investigation on tool wear during end milling of AISI H13 steel with different tool path strategies
by: Adesta, Erry Yulian Triblas, et al.
Published: (2017)

Improved machinability of Titanium alloy Ti-6Al-4V: implementation of preheated machining
by: Ginta, Turnad Lenggo, et al.
Published: (2010)

Experimental Investigation of the Effect of Feed Rate and Negative Tool Rake Angle in High Speed Hard Turning
by: Al Hazza, Muataz Hazza Faizi, et al.
Published: (2013)

Effect of tool path strategies of CAD/CAM operation in CNC milling of mold core component
by: Zaman, Hainol Akbar
Published: (2009)

Tool wear rate during electrical discharge machining (EDM) with eccentric electrode
by: Khan, Ahsan Ali, et al.
Published: (2011)