The influence of debond length on the buckling and wrinkling of sandwich beams under compressive load / Bambang K. Hadi

QR Code

The influence of debond length on the buckling and wrinkling of sandwich beams under compressive load / Bambang K. Hadi

A two- and three-dimensional finite element analysis was carried out to analyze critical buckling loads of debonded sandwich beams. Both overall buckling and wrinkling were analyzed, using sandwich beams having 45 mm and 75 mm core thicknesses. The analysis shows that sandwich beams with 45 mm core...

Full description

Bibliographic Details
Format:	Article
Language:	English
Published:	UPENA 2007
Online Access:	https://ir.uitm.edu.my/id/eprint/17540/

Similar Items

The design of a high aspect ratio HALE aircraft composite wing. part II: buckling and flutter speed analysis / Bambang K. Hadi and IndraPermana
by: Hadi, Bambang K., et al.
Published: (2015)

Cylindrical shell buckling under axial compression load
by: Shah, Qasim Hussain, et al.
Published: (2011)

BUCKLING BEHAVIOUR OF ANGLE SECTION BEAM WITH THE UNSTIFFENED FLANGES IN COMPRESSION
by: Sivakumar, Dhar Malingam, et al.
Published: (2006)

Mitigation of plate end debonding in CFRP strengthened wide-flange steel I-beams under monotonic and fatigue loading / Mohamed Kamruzzaman
by: Mohamed, Kamruzzaman
Published: (2017)

Finite element modeling and analysis of a debonded smart beam in actuation
by: Butt, Mohammad Mursaleen, et al.
Published: (2019)

The design of a high aspect ratio HALE aircraft composite wing. part I: static strength analysis / Bambang K. Hadi, Muhammad A. Ghofur and IndraPermana
by: Hadi, Bambang K., et al.
Published: (2015)

Numerical analysis of aluminum foam sandwich subjected to compression loading
by: Al Hazza, Muataz Hazza Faizi, et al.
Published: (2019)

Numerical analysis of aluminum foam sandwich subjected to compression loading
by: Al Hazza, Muataz Hazza Faizi, et al.
Published: (2018)

Scaling Effects for Compression Loaded of Corrugated-core Sandwich Panels
by: M. R. M., Rejab, et al.
Published: (2016)

Fracture Behaviours in Compression-loaded Triangular Corrugated Core Sandwich Panels
by: N. Z. M., Zaid, et al.
Published: (2016)

Behaviour of circular sandwich panel under dynamic loading
by: Alias, Amran, et al.
Published: (2005)

Classification of transient facial wrinkle
by: Rosdiyana, Samad, et al.
Published: (2019)

Novel stiffeners exploiting internal pressurisation to enhance buckling behaviour under bending loads
by: Polenta, Valerio, et al.
Published: (2016)

Simulation of strengthened reinforced concrete beam debonding behaviour using global energy balance approach / Nusrat Hoque
by: Nusrat , Hoque
Published: (2018)

Performance of cruciform column using universal beam sections under axial compression load
by: Md. Tahir, Mahmood, et al.
Published: (2005)

The flexural strength of polystyrene sandwich beam
by: Nur Hazwani, Alias
Published: (2013)

Honeycomb carbon sandwich composite panel under compressive load flat-wise: experimental analysis / Ramzyzan Ramly...[et al.]
by: Ramly, Ramzyzan, et al.
Published: (2020)

Experimental study of intermediate length coupling beams subjected to monotonic load
by: Abu Bakar, Nabilah, et al.
Published: (2017)

The behaviour of square sandwich panel Part I: under static loading
by: Alias, Amran, et al.
Published: (2007)

Prediction of wrinkling using finite element simulation
by: Mohd Fizree, Abdul Razak
Published: (2013)

Reducing wrinkling and tearing of deep draw part
by: Mohd Naeemil Mahmudi, Mahmud
Published: (2012)

An assessment of quality, trust and usability of Indonesian agricultural journals / Bambang Winarko
by: Winarko, Bambang
Published: (2015)

Application of simple plane cap model to simulate compression failure of RC beam under impact loads
by: Mokhatar, Shahrul Niza, et al.
Published: (2020)

Simulation of crack under compression loads.
by: Ali, Aidy, et al.
Published: (2009)

Structural Behaviour of Precast Concrete Sandwich Panels with Openings Under Axial Load
by: Abdul Aziz, Farah Nora Aznieta
Published: (2002)

Behavior of indented sandwiches structure with Nomex honeycomb core and metallic skins subjected to compressive loading (CAI)
by: Aminanda, Yulfian, et al.
Published: (2007)

Load‑bearing behaviors of sandwich plates with non‑uniformly distributed grid cores : Static compression and bending
by: Hao, Ning, et al.
Published: (2023)

Behavior and Strength of Lightweight Sandwich Reinforced Concrete Beams
by: Vimonsatit, Vanissorn, et al.
Published: (2011)

Effect of cutout shape on the critical buckling load of a perforated plate
by: Syed Mohamed Ali, Jaffar, et al.
Published: (2011)

Particle fracture and debonding during orthogonal machining of metal matrix composites
by: Pramanik, Alokesh, et al.
Published: (2017)

Compressive behaviour and energy absorption of aluminium foam sandwich
by: Endut, N A, et al.
Published: (2018)

Post-Fire Compression Properties Of Sandwich Composite Material
by: Zainul, Abdul Rahman
Published: (2017)

Structural Behaviour of Pre-Cast Concrete Sandwich Panel under Axial and Lateral Loading
by: Abbaker, Abdelfattah Elnur
Published: (1999)

Improving buckling and post-buckling of shape memory alloy laminated composite plates subjected to mechanical and thermal loading using finite element method
by: A.Rasid, Zainudin
Published: (2012)

The role of public secondary school counselors in the Province of East Java Indonesia / Bambang Suryadi
by: Suryadi, Bambang
Published: (2003)

Perbandingan sistem komunikasi politik Presiden Soeharto dan Soesilo Bambang Yudoyono (Sby)
by: Harmonis,
Published: (2012)

PREDICTION OF BUCKLING LOAD OF STEEL RACKING FRAME USING NON DESTRUCTIVE METHOD
by: Kalaikumar, V., et al.
Published: (2010)

A study of annular plate buckling problem with tension loaded at inner edge
by: Syed Abu Bakar, Syed Noh, et al.
Published: (2010)

Buckling of long column
by: Syed Mohamed Ali, Jaffar, et al.
Published: (2011)

Buckling of composite columns
by: Syed Mohamed Ali, Jaffar, et al.
Published: (2011)