Comparative study on combined series active and shunt passive power filter using two different control methods
This paper presents a comparative study of the combined series active and shunt passive power filter, using instantaneous real active and reactive power (p-q) and instantaneous active and reactive current component (id-iq) method. The p-q method has been proposed as the control method for the combin...
| Main Authors: | , |
|---|---|
| Format: | Conference or Workshop Item |
| Language: | English |
| Published: |
2007
|
| Subjects: | |
| Online Access: | http://scholars.utp.edu.my/id/eprint/443/ http://scholars.utp.edu.my/id/eprint/443/1/paper.pdf |
| Summary: | This paper presents a comparative study of the combined series active and shunt passive power filter, using instantaneous real active and reactive power (p-q) and instantaneous active and reactive current component (id-iq) method. The p-q method has been proposed as the control method for the combined filter and gives satisfactory performance [2-3] while id-iq method was proven to give better performance for shunt active power filter in harmonic compensation [5]. Two models of a power line with a nonlinear load using p-q and id-iq method are developed using MATLAB-Simulink SimPower System. Models are simulated for three different conditions of supply source; the balanced sinusoidal supply, unbalanced sinusoidal supply and balanced non-sinusoidal supply. The percentage of total harmonic distortion (%THD) of the output current is measured and the waveform is observed. Based on the result, it is verified that the id-iq control method gives a slightly better result for a distorted supply condition. However, both control method has same effectiveness to compensate the harmonic current when the supply is a normal balanced and sinusoidal. ©2007 IEEE.
|
|---|