Effect of Photo-Fenton Operating Conditions on the Performance of Photo-Fenton-SBR Process for Recalcitrant Wastewater Treatment
The study was undertaken to examine the effect of H2O2/Fe2+ molar ratio as one of the important operating conditions on the performance of the combined photo-Fenton-SBR process for treatment of recalcitrant (antibiotic) wastewater. The SBR was fed with photo-Fenton-treated antibiotic wastewater unde...
| Main Authors: | , |
|---|---|
| Format: | Citation Index Journal |
| Language: | English |
| Published: |
Asian Network for Scientific Information
2010
|
| Subjects: | |
| Online Access: | http://scholars.utp.edu.my/id/eprint/2939/ http://scholars.utp.edu.my/id/eprint/2939/1/Effect_of_Photo-Fenton_Operating_Conditions_on_the_Performance_of_Photo-Fenton-SBR_Process_for_Recalcitrant_Wastewater_Treatment.pdf |
| Summary: | The study was undertaken to examine the effect of H2O2/Fe2+ molar ratio as one of the important operating conditions on the performance of the combined photo-Fenton-SBR process for treatment of recalcitrant (antibiotic) wastewater. The SBR was fed with photo-Fenton-treated antibiotic wastewater under five H2O2/Fe2+ molar ratios (10, 20, 50, 100 and 150). The results indicated that as H2O2/Fe2+ molar ratio decreases (increase of Fe2+ concentration) BOD5/COD ratio of the photo-Fenton-treated effluent increases and SBR and overall efficiency increases. The SBR efficiency in terms of sCOD removal was observed to be very sensitive to BOD5/COD ratio below 0.40. It decreased from 69±1% at BOD5/COD ratio of 49±0.01 to 44±1% at 0.19±0.02. In this study, the best H2O2/Fe2+ molar ratio for treatment of the antibiotic wastewater was observed to be 20. At photo-Fenton-SBR operating conditions H2O2/Fe2+ molar ratio 20, H2O2/COD molar ratio 2.5, pH 3 and 30 min photo-Fenton irradiation time and 24 h hydraulic retention time in SBR, the combined photo-Fenton-SBR efficiency was 86% as sCOD and final sCOD was 56±2 mg/L, which met the requirements of the discharge standard. |
|---|