Effects of Used Engine Oil on MIRHA Concrete

QR Code

Effects of Used Engine Oil on MIRHA Concrete

Over the years, the number of vehicles is increasing all over the world therefore this leads to the increased of the production of used engine oil. Approximately 1.35 billion gallons of used oil are generated yearly. At the same time, 120 million tones of rice husk is being produced annually. These...

Full description

Bibliographic Details
Main Authors:	Nuruddin, F, Shafiq, N., Beddu, Salmia
Format:	Conference or Workshop Item
Language:	English
Published:	2010
Subjects:	TA Engineering (General). Civil engineering (General)
Online Access:	http://scholars.utp.edu.my/id/eprint/2419/ http://scholars.utp.edu.my/id/eprint/2419/1/Effects_of_Used_Engine_Oil_on_MIRHA_Concrete.pdf

Similar Items

NON-EVAPORABLE WATER ANALYSIS ON MIRHA FOAMED CONCRETE
by: Nuruddin, F, et al.
Published: (2010)

Structural Performance of Reinforced Concrete Beams Containing Used Engine Oil
by: Chin, S.C., et al.
Published: (2010)

Membuktikan Anggapan Analisa Geoteknik (Tekanan Sisi Tanah) Menggunakan Model Fizikal
by: Beddu, Salmia
Published: (2006)

Effectiveness of used engine oil on improvement of properties of fresh and hardened concrete
by: Shafiq, Nasir, et al.
Published: (2006)

HARSH-concrete
by: Shafiq, N., et al.
Published: (2008)

ULUBE-concrete
by: Shafiq, N., et al.
Published: (2008)

Comparison of engineering and durability properties of fly ash blended cement concrete made in UK and Malaysia
by: Shafiq, N., et al.
Published: (2007)

Chloride ion migration in concrete using electrical method by applying current at different voltages
by: Shafiq, N., et al.
Published: (2010)

The Effect of Natural Retarder On Fly Ash Based Geopolymer Concrete
by: Nuruddin, F, et al.
Published: (2010)

Fatigue behaviour of CFRP concrete joints under shear
by: Mahhoud, L, et al.
Published: (2009)

Thermo-mechanical efficiency of fibre-reinforced structural lightweight aggregate concrete
by: Payam, Shafigh, et al.
Published: (2022)

Compressive Strength & Microstructure of Polymeric Concrete Incorporating Fly Ash & Silica Fume
by: Shafiq, N., et al.
Published: (2010)

Compressive Strength & Microstructure of Polymeric Concrete Incorporating Fly Ash & Silica Fume
by: Nuruddin, F, et al.
Published: (2010)

Polymeric Concrete: Complete Elimination of Cement for Sustainable Futures
by: Nuruddin, F, et al.
Published: (2010)

Shear-moment interaction of CFRP strengthened concrete elements under monotonic and cyclic loads
by: Shafiq, N., et al.
Published: (2009)

Effects of Large Openings in the Shear Zone of Reinforced Concrete Beams
by: Chin, Siew Choo, et al.
Published: (2013)

Effects of used engine oil on slump, compressive strength and oxygen permeability of normal and blended cement concrete
by: Nasir, Shafiq, et al.
Published: (2018)

EFFICIENCY OF USING EXTERNALLY BONDED CFRP LAMINATES UNDER SHEAR-MOMENT INTERACTION CONDITIONS
by: Shafiq, N., et al.
Published: (2009)

Reinforced Concrete Deep Beams with Openings Strengthened Using FRP - A Review
by: Chin, Siew Choo, et al.

Reinforced Concrete Deep Beams with Openings Strengthened Using FRP - A Review
by: Chin, Siew Choo, et al.
Published: (2014)

Moisture equilibrium, degree of hydration and compressive strength of different cement pastes
by: Shafiq, N., et al.
Published: (2010)

Degree of hydration of OPC and OPC/Fly ash paste samples conditioned at different relative humidity
by: Shafiq, N., et al.
Published: (2010)

Degree of hydration of OPC and OPC/FA paste samples
by: Shafiq, N., et al.
Published: (2010)

Degree of hydration and compressive strength of conditioned samples made of normal and blended cement system
by: Shafiq, N., et al.
Published: (2010)

Degree of hydration and compressive strength of conditioned samples made of normal and blended cement system
by: Shafiq, N., et al.
Published: (2010)

Compressive Strength & Microstructure of Polymeric Concrete Incorporating Fly Ash & Silica Fume
by: Nuruddin, F
Published: (2010)

FRP as strengthening material for Reinforced Concrete beams with openings - A review
by: Chin, Siew Choo, et al.

Chloride ion migration in concrete using electrical method by applying current at different voltages
by: Shafiq, N.
Published: (2010)

Effects of initial curing condition on the fluid transport properties in OPC and fly ash blended cement concrete
by: Shafiq, N.
Published: (2003)

Concrete Part-2: Method of specifying and guidance
by: Shafiq, N.
Published: (2011)

Cadmium (Cd) removal from aqueous solution using microwave incinerated rice husk ash (MIRHA)
by: Isa, M.H., et al.
Published: (2010)

Effects of fly ash on chloride migration in concrete and calculation of cover depth required against the corrosion of embedded steel reinforcement
by: Shafiq, N.
Published: (2004)

Strength and Microstructural Properties of Fly Ash Based Geopolymer Concrete Containing High-Calcium and Water-Absorptive Aggregate
by: Kusbiantoro, Andri, et al.
Published: (2016)

Shear-moment interaction of CFRP strengthened concrete elements under monotonic and cyclic loads
by: Shafiq, N.
Published: (2010)

Study of monitoring concrete strength development using infrared thermography (IRT)
by: Mohd Shafiq, Mohd Zin
Published: (2017)

Strength and Microstructural Properties of Fly Ash Based Geopolymer Concrete Containing High-Calcium and Water Absorptive Aggregate
by: Rahimah, Embong, et al.
Published: (2016)

Engineering Properties of Oil Palm Shell (OPS) Hybrid Concrete for Lightweight Precast Floor Slab
by: Ng, C.H., et al.
Published: (2007)

Engineering properties of concrete containing synthetic lightweight coarse aggregate using offshore sand foamed concrete (SYLCAG)
by: Zubir, Mohammad Amirulkhairi, et al.
Published: (2017)

Degree of hydration of OPC and OPC/FA pastes dried in different relative humidity
by: Shafiq, Nasir, et al.
Published: (2010)

The effectiveness of oil palm shell (OPS) as major aggregate replacement in concrete
by: N., Abdul Rahman*, et al.
Published: (2020)

Cannot write session to /tmp/vufind_sessions/sess_ib36m08rl4nnjqvop6ij7tfpmf