Characterization of the feedstock properties of metal injection-molded WC-Co with palm stearin binder system

QR Code

Characterization of the feedstock properties of metal injection-molded WC-Co with palm stearin binder system

Feedstock preparation, as well as its characterization, is crucial in the production of highly sintered parts with minimal defect. The hard metal powder - particularly, cemented carbide (WC-Co) used in this study was investigated both physically and thermally to determine its properties before the m...

Full description

Bibliographic Details
Main Authors:	Sri Yulis M. Amin, Norhamidi Muhamad, Khairur Rijal Jamaludin, Abdolali Fayyaz, Heng, Shye Yunn
Format:	Article
Language:	English
Published:	Universiti Kebangsaan Malaysia 2014
Online Access:	http://journalarticle.ukm.my/6824/ http://journalarticle.ukm.my/6824/1/16_Sri_Yulis.pdf

Similar Items

Characterisation of titanium alloy feedstock for metal injection moulding using palm stearin binder system
by: Mohamad Nor, N. H., et al.
Published: (2009)

Feedstock characterisation of titanium alloy mix with palm stearin binder system for metal injection moulding
by: Mohamad Nor, Nor Hafiez, et al.
Published: (2009)

An influence of a binder system to the rheological behavior of the SS16l metal injection molding (MIM) feedstock
by: Jamaludin, Khairur Rijal, et al.
Published: (2009)

Characterization of metal injection molding (MIM) feedstock based on water soluble binder system
by: Muhamad Hussain Ismail,, et al.
Published: (2008)

Effects of vanadium carbide on sintered WC-10%Co produced by micro-powder injection molding
by: Wong, Yee Ning, et al.
Published: (2015)

Rheological investigation of water atomized metal injection molding (MIM) feedstock for processibility prediction
by: Jamaludin, Khairur Rijal, et al.
Published: (2010)

Development of porous Ti-6Al-4V mix with palm stearin binder by metal injection molding technique
by: Jamaludin, Mohamad Ikhwan, et al.
Published: (2015)

Particle size and injection temperature effect on the injection molding of SS316l powder
by: Jamaludin, Khairur Rijal, et al.
Published: (2008)

Rheological properties of SS316l MIM feedstock prepared with different particle sizes and powder loadings
by: M. Amin, Sri Yulis, et al.
Published: (2009)

Injection molding parameter optimization of titanium alloy powder mix with palm stearin and polyethylene for green defects using taguchi method
by: Mohamad Nor, Nor Hafiez, et al.
Published: (2009)

Effects of nanopowder addition on rheological properties of feedstock for micropowder injection moulding process
by: Rajabi, Javad, et al.
Published: (2019)

Optimization of injection molding and solvent debinding parameters of stainless steel powder (SS316L) based feedstock for metal injection molding
by: Muhammad Ilman Hakimi Chua,, et al.
Published: (2013)

Flow behaviour to determine the defects of green part in metal injection molding
by: Mohamad Nor, Nor Hafiez, et al.
Published: (2009)

Rheological characterization of water atomised stainless steel powder for micro metal injection molding
by: Ibrahim, Mohd. Halim Irwan, et al.
Published: (2009)

Characterization of newly developed feedstock in metal injection moulding application using titanium mix with palm stearin binder system / Nor Hafiez Mohamad Nor , Muhammad Hussain Ismail and Prof. Dr. Norhamidi Muhamad
by: Mohamad Nor, Nor Hafiez, et al.
Published: (2011)

Optimization of injection molding parameters for WC-TaC-6Co
by: Prathabrao, M., et al.
Published: (2019)

Orthogonal array technique for optimizing the sintering parameter of the metal injection molding (MIM) compact: best flexure strength
by: Jamaludin, Khairur Rijal, et al.
Published: (2009)

Sintered strength of ti-6Al-4V by metal injection molding (MIM) using palm stearin binder / N. H. Mohamad Nor...[et al.]
by: N. H., Mohamad Nor, et al.
Published: (2019)

Study on stability of a novel binder system based on palm stearin in metal injection moulding application / Muhammad Hussain Ismail ... [et al.]
by: Ismail, Muhammad Hussain, et al.
Published: (2007)

Processibility of black garbage bag as a novel binder system in metal injection molding
by: Mustafa, Najwa
Published: (2012)

Moldability characteristics of 3 mol% Yttria Stabilized Zirconia feedstock for micro-powder injection molding process
by: Hafizawati Zakaria,, et al.
Published: (2014)

Development of porous TI-6AL-4V mix with palm stearin binder by metal injection moulding technique / Mohamad Ikhwan Jamaludin
by: Jamaludin, Mohamad Ikhwan
Published: (2015)

Moldability of nano size zirconia for powder injection molding process by using PEG and PMMA binders
by: Al Basir,, et al.
Published: (2020)

Metal injection moulding of hip stem CoCrMo alloy powder using palm stearin binder system
by: Omar, Mohd Afian, et al.
Published: (2016)

Feedstock preparation of injection moulded stainless steel using biodegradable starch binder
by: Omar, Mohd Afian, et al.
Published: (2011)

Homogenous feedstock for metal injection molding (MIM) process / Yusb Ishaq Mohamad and Mior Sharul Nizam Mior Ahmad
by: Mohamad, Yusb Ishaq, et al.
Published: (2004)

Metal injection molding of implant materials
Published: (2014)

Thermoplastic natural rubber (TPNR) as a backbone polymer for metal injection molding
by: Norita Hassan,, et al.
Published: (2013)

Effect of mixing process parameters and suitability of backbone polymer for aluminum powder injection molding feedstock
by: A.A. Abdullahi,, et al.
Published: (2017)

The effects of various TPNR binder compositions on feedstock preparation for MIM process
by: Hassan, Norita, et al.
Published: (2015)

Morphology and mechanical properties of MIM feedstock using TPNR backbone binder
by: Hassan, Norita, et al.
Published: (2015)

Injection molding using a novel binder system based on palm oil derivatives
by: Abu Talib, Abd. Rahim, et al.
Published: (2013)

Investigations on metal injection molding of 316L SS using Thermoplastic Natural Rubber (TPNR) binder as a new system
by: Hassan, Norita, et al.
Published: (2012)

Metal injection moulding of NiTi alloy from elemental powder of nickel and titanium using palm stearin based binder system / Rosliza Razali
by: Razali, Rosliza
Published: (2016)

Injection moulding of 316L stainless steel powder using palm stearin based binder system / Istikamah Subuki
by: Subuki, Istikamah
Published: (2010)

Injection Molding of Stainless Steel (SUS 316L) Powder Using a Thermoplastic Binder System
by: Ibrahim, Rosdi
Published: (2002)

Green strength optimization of injection molding proces for novel recycle binder system using Taguchi method
by: Ibrahim, Mohd Halim Irwan, et al.
Published: (2020)

Metal Injection Moulding, orthogonal array, analysis of variance, flexure strength, sintering
by: Ibrahim, Mohd. Halim Irwan, et al.
Published: (2009)

Pemilihan bahan suapan bagi proses pengacuan suntikan logam berdasarkan kepada kajian sifat reologi
by: Muhamad, Norhamidi, et al.
Published: (2008)

Fabrication of microcomponents by injection molding
by: Yuan , S., et al.
Published: (2004)