Analyzing stress concentration factor in finite plate with different polygonal
discontinuities under uniaxial compression using FEM

QR Code

Analyzing stress concentration factor in finite plate with different polygonal discontinuities under uniaxial compression using FEM

A geometric, or theoretical, stress-concentration factor is the ratio of the actual maximum stress at the discontinuity to the nominal stress. Stress concentrations occur when there are irregularities in the geometry or material of a structural component that cause an interruption to the flow of str...

Full description

Bibliographic Details
Main Authors:	Patel, Rashmiben H., Patel, Bhaveshkumar P.
Format:	Article
Language:	English
Published:	Penerbit Universiti Kebangsaan Malaysia 2023
Online Access:	http://journalarticle.ukm.my/22825/ http://journalarticle.ukm.my/22825/1/05%20%281%29.pdf

Similar Items

hp-Version discontinuous Galerkin methods on polygonal and polyhedral meshes
by: Cangiani, Andrea, et al.
Published: (2014)

Discontinuous Galerkin FEMs for Radiation Transport Problems
by: Widdowson, Richard
Published: (2023)

Estimation of stress concentration factor for a plate with hole under axial tension loading
by: Hiren Prajapati,, et al.
Published: (2023)

Two typical phases of failure acceleration in rocks under uniaxial compression
by: Cheng, L., et al.
Published: (2024)

Development of discontinuous fibre preforming processes
by: Patel, Critesh
Published: (2013)

Multigrid algorithms for hp-version interior penalty discontinuous Galerkin methods on polygonal and polyhedral meshes
by: Antonietti, P. F., et al.
Published: (2017)

Effect of stress level on the frost resistance and uniaxial compressive properties of desert sand concrete
by: Jiang, Yanjie, et al.
Published: (2024)

Expression polygons
by: Foster, Colin
Published: (2015)

Expression polygons
by: Foster, Colin
Published: (2015)

Anisotropic hp-adaptive discontinuous Galerkin finite element methods for compressible fluid flows
by: Giani, Stefano, et al.
Published: (2011)

Study of morphologic response of chondrocytes to uniaxial compression of articular cartilage
by: Wu, Ping, et al.
Published: (2008)

Stress dependency of elastic properties of shales: the effect of uniaxial stress
by: Pervukhina, M., et al.
Published: (2011)

Stress concentration analysis of plate with circular hole : elasticity theory and finite element comparison
by: Masrol, S.R., et al.
Published: (2014)

Geometry Compression for 3D Polygonal Models using a Neural Network
by: Rumman, N., et al.
Published: (2010)

Robust digital watermarking for compressed 3D models based on polygonal representation
by: El-Seoud, S., et al.
Published: (2013)

A study on the characteristics of microseismic signal during deformation and failure of different materials under uniaxial compression
by: Li, C., et al.
Published: (2016)

High-order hp-adaptive discontinuous Galerkin finite element methods for compressible fluid flows
by: Giani, Stefano, et al.
Published: (2010)

Predicting uniaxial compressive strength using Support Vector Machine algorithm
by: Zakaria, Hafedz, et al.
Published: (2019)

Correlation between uniaxial compressive strength and point-load index strength
by: Sundara, Parameswary
Published: (2009)

Estimation of stress concentration factor of plate with hole using piezoelectric actuator and finite element method
by: Abuzaid, Ahmed, et al.
Published: (2017)

Small polygons and toric codes
by: Brown, Gavin, et al.
Published: (2013)

Minimality and mutation-equivalence of polygons
by: Kasprzyk, Alexander M., et al.
Published: (2017)

Effect of lamination on rock properties under uniaxial loading
by: Ooi, Chow Ern
Published: (2008)

Precursory deformation responses in different directions to catastrophic failure of uniaxially compressed sandstones
by: Cheng, L., et al.
Published: (2024)

Uniaxial compressive strength of Antarctic Peninsula rocks: Schmidt hammer rebound test
by: Goh, Thian Lai, et al.
Published: (2017)

Effect of desert sand on the uniaxial compressive properties of mortar after elevated temperature
by: Zhang, Qian, et al.
Published: (2020)

Effect of desert sand on the uniaxial compressive properties of mortar after elevated temperature
by: Zhang, Qian, et al.
Published: (2021)

Uniaxial compression and tensile splitting tests on adobe with embedded steel wire reinforcement
by: Jokhio, Gul Ahmed, et al.
Published: (2018)

Uniaxial Compression Strength (Ucs) Test On Mechanical Behaviours Of Anisotropic Rock Cell
by: Azmi, Muhammad Irfan Mohd
Published: (2017)

Development of frame analysis program by finite element method (FEM)
by: Abdul Fattah, Haji Osman.
Published: (1998)

Surface crack growth prediction under fatigue load using the S-version Finite Element Model (S-FEM)
by: M. N. M., Husnain, et al.
Published: (2019)

Failure analysis of woven Kevlar/Epoxy under uniaxial tension
by: Rahimi, Norzihan, et al.
Published: (2018)

Strength degradation of sandstone and granodiorite under uniaxial cyclic loading
by: Geranmayeh, R., et al.
Published: (2018)

Spatial heterogeneity of precursory accelerating deformation in uniaxially compressed sandstones and prediction of failure time
by: Cheng, L., et al.
Published: (2024)

Durability simulation of elastomeric materials using finite element method (FEM)
by: Chieh, C. W., et al.
Published: (2010)

Durability simulation of elastomeric materials using finite element method (FEM)
by: Chieh, C. W., et al.
Published: (2009)

Simulation of open-ended coaxial sensor by finite element method (FEM)
by: Abbas, Zulkifly, et al.
Published: (2009)

Fracture mechanics analysis of geometrically nonlinear thin plates by FEM /Hamid Taheri
by: Hamid, Taheri
Published: (2013)

Use of ultrasonic velocity travel time to estimate uniaxial compressive strength of granite and schist in Malaysia
by: Goh, Thian Lai, et al.
Published: (2016)

Critical Study of Open-ended Coaxial Sensor by Finite Element Method (FEM)
by: Mohamad Ashry, Jusoh, et al.
Published: (2013)