Shear test characterization of 3d printed polyamide reinforced carbon fiber composites

QR Code

Shear test characterization of 3d printed polyamide reinforced carbon fiber composites

The issue of delamination occurring on PACF materials is a structural application failure due to poor mechanical strength. The bonding process of composite materials between layers using fused deposition modeling (FDM) printing affects the tensile strength of the material. The main objective of this...

Full description

Bibliographic Details
Main Authors:	Nisa Naima Khalid, Fatin Zahidah Awang Adi, Nabilah Afiqah Mohd Radzuan, Abu Bakar Sulong
Format:	Article
Language:	English
Published:	Penerbit Universiti Kebangsaan Malaysia 2023
Online Access:	http://journalarticle.ukm.my/22124/ http://journalarticle.ukm.my/22124/1/jk_14.pdf

Similar Items

3D Printed carbon fibre reinforced polyamides in high temperature Poliamida diperkuat gentian karbon cetakan 3D pada suhu tinggi
by: Norazyan Rudi Hartono,, et al.
Published: (2003)

Rheological test of flowability and diffusion behavior of carbon fibre reinforced polyamide
by: Nisa Naima Khalid,, et al.
Published: (2023)

Reinforced composite as a feeder for 3D printing application
by: Nisa Naima Khalid,, et al.
Published: (2022)

Influence of layer thickness of 3D printed polyamide against temperature
by: Nabilah Afiqah Mohd Radzuan,, et al.
Published: (2024)

Properties of kenaf fiber-reinforced polyamide 6 composites
by: Abdullah, Norihan, et al.
Published: (2024)

Properties of kenaf fiber-reinforced polyamide 6 composites
by: Abdullah, Norihan, et al.
Published: (2024)

Preparation and characterisation of 3D printed polyamide 6 composites for craniofacial reconstruction
by: Abdullah, Abdul Manaf
Published: (2020)

Tensile Properties of Glass Fiber Reinforced Polyamide 6-Polypropylene Composites
by: Nurizzathanis, Mohamad Kusaseh, et al.
Published: (2017)

Shear Test on Reinforced Clay
by: Chegenizadeh, Amin, et al.
Published: (2011)

Direct shear test on reinforced clay
by: Chegenizadeh, Amin, et al.
Published: (2011)

Shear test on reinforced clayey sand
by: Chegenizadeh, Amin, et al.
Published: (2011)

Prestasi bahan polimer komposit dicetak menggunakan pemodelan pemendapan bersatu : suatu ulasan ringkas
by: Nisa Naima Khalid,, et al.
Published: (2022)

Numerical shear test on reinforced clayey sand
by: Chegenizadeh, Amin, et al.
Published: (2012)

Automated shear test on reinforced clayey sand
by: Chegenizadeh, Amin, et al.
Published: (2011)

A study on mechanical performance of 3D printed wood mimic materials
by: Abid Fariduddin Mohd Fauzi,, et al.
Published: (2024)

Structural behaviour of fibers as part of shear reinforcement in reinforced concrete slab
by: Baarimah, Abdullah Omar Obaid
Published: (2019)

Simulation analysis of graphene addition on polymeric composite
by: Nisa Naima Khalid,, et al.
Published: (2022)

Recent Developments in Improving the Fracture Toughness of 3D-printed Fiber-Reinforced Polymer Composites
by: Khan, Tayyab, et al.
Published: (2024)

Thermal properties of wood flour reinforced polyamide 6 biocomposites by twin screw extrusion
by: Abdullah, Norihan, et al.
Published: (2022)

Investigation on mechanical properties of glass fiber reinforced polyamide 6-polypropylene composites under different operating conditions
by: Nurizzathanis, Mohamad Kusaseh
Published: (2020)

Emerging natural fiber-reinforced cement materials and technology for 3D concrete printing: a review
by: Mohd Zainuri, Mohamad Izwan Saifudin, et al.
Published: (2020)

An Overview of Using Steel Fibers in Reinforced Concrete Structural Elements to Improve Shear Reinforcement
by: Baarimah, A. O., et al.
Published: (2016)

Fracture mechanic modeling of fiber reinforced polymer shear-strengthened reinforced concrete beam
by: Shahbazpanahi, Shahriar, et al.
Published: (2015)

Fatigue and impact properties of 3D printed PLA reinforced with kenaf particles
by: Shahar, Farah Syazwani, et al.
Published: (2021)

Interfacial debonding force and shear strength of sugar palm (Arenga pinnata) fiber reinforced composites by pull-out test
by: Khor, Ling Si, et al.
Published: (2013)

Fundamental study and modification of Kenaf fiber reinforced polylactic acid bio-composite for 3D printing filaments
by: Alaa, Moustafa, et al.
Published: (2023)

Shear strength improvement of foundation soil by using polymer fiber reinforcement
by: Lee, Kok Wai
Published: (2012)

Shear strength of concrete beams reinforced with glass fiber reinforced polymer bars without stirrups
by: Omar Imohamed, Imohamed Ali
Published: (2018)

Shear strength of concrete beams reinforced with glass fiber reinforced polymer bars without stirrups
by: Omar Imohamed, Imohamed Ali
Published: (2018)

The effect of testing & environmental conditions on the properties of injection moulded glass fibre reinforced polyamide 6 composites / Asfarina Amir Hassan
by: Asfarina, Amir Hassan
Published: (2011)

Structural behaviour of kenaf fiber as part shear reinforcement in oil palm shell reinforced concrete beams
by: Sayed Javid, Azimi
Published: (2015)

Reinforced Concrete Box Beam Strengthened By Carbon-Fiber-Reinforced Polymer Subjected To Combined Shear And Torsion
by: Shengqiang, Ma
Published: (2017)

Fabrication and characterisation of kenaf fibre reinforced polyamide biocomposites for railway sleeper applications
by: ahmad, mukaddas, et al.
Published: (2024)

Shear modulus of LVL based on bending shear test
by: H'ng, Paik San, et al.
Published: (2013)

Characterization of polyamide 6.10 composites incorporated with microcrystalline cellulose fiber: Effects of fiber loading and impact modifier
by: Beg, M. D. H., et al.
Published: (2018)

Influence of glass fiber content on the flexural properties of polyamide 6-polypropylene blend composites
by: Nurizzathanis, Mohamad Kusaseh, et al.
Published: (2020)

Trimethylamine functionalized radiation-induced grafted polyamide 6 fibers for p-nitrophenol adsorption
by: M.Saber, Shihab Ezzuldin, et al.
Published: (2021)

Characterization of glass fibre reinforced polyamide/acrylonitrile butadiene-styrene composite for automotive application
by: Rahmat, Abdul Razak, et al.
Published: (2009)

Prediction of Mechanical Properties of 3D Printed Particle-Reinforced Resin Composites
by: Rooney, Kimberley, et al.
Published: (2024)

Deformation behaviour of 3D printed reinforced hydroxyapatite/gelatin bio-ceramics
by: Megalingam, Arumugampillai, et al.
Published: (2023)