Fabrication of magnesium-carbonate apatite by conventional sintering and spark plasma sintering for orthopedic implant applications

QR Code

Fabrication of magnesium-carbonate apatite by conventional sintering and spark plasma sintering for orthopedic implant applications

Magnesium-Carbonate Apatite (Mg-xCA) is one of the potential magnesium composites to be developed as an alternative biodegradable implant material. Several attempts were made to optimize its characteristics. In this study, Mg-xCA (x = 0, 5, 10, and 15% wt) was prepared by powder metallurgy through w...

Full description

Bibliographic Details
Main Authors:	Setyadi, Iwan, Sudiro, Toto, Hermanto, Bambang, Oktari, Prima Rizky, Kamal, Achmad Fauzi, Rahyussalim, Ahmad Jabir, Suharno, Bambang, Supriadi, Sugeng
Format:	Article
Language:	English
Published:	Penerbit Universiti Kebangsaan Malaysia 2022
Online Access:	http://journalarticle.ukm.my/19173/ http://journalarticle.ukm.my/19173/1/22.pdf

Similar Items

Degradation characteristics of porous Fe-Mn-C alloys obtained by sintering-dissolution process (SDP) for metallic bone scaffold
by: Pratesa, Yudha, et al.
Published: (2020)

Spark plasma sintered hydroxyapatite / bioglass composite for improved biological performance / Muhammad Rizwan
by: Muhammad , Rizwan
Published: (2019)

Fine grained Ba[1-x]Sr[x]Tio[3] ceramics by spark plasma sintering
by: Tian, Hu-Yong, et al.
Published: (2008)

A Comprehensive Microstructural Analysis of Al-WC micro- and Nano-composites Prepared by Spark Plasma Sintering
by: Pakdel, Amir, et al.
Published: (2017)

Comparative Study On The Sintering Of Calcium Phosphate Ceramic By Conventional And Microwave Sintering
by: Mangkonsu, Chuthathip
Published: (2014)

Densification and mechanical properties of electroconductive Si3N4 -based composites prepared by spark plasma sintering
by: Norhayati Ahmad,, et al.
Published: (2012)

A relationship of porosity and mechanical properties of spark plasma sintered scandia stabilized zirconia thermal barrier coating
by: Iqbal, AKM Asif, et al.
Published: (2023)

Microwave sintering of metallic materials
by: Mohamed Ariff, Tasnim Firdaus
Published: (2011)

Microwave sintering of ceramic materials
by: Mohamed Ariff, Tasnim Firdaus
Published: (2011)

Effects of sintering atmospheres on sintering behavior, electrical conductivity and oxygen permeability of mixed-conducting membranes
by: Chang, X., et al.
Published: (2008)

The role of tin and magnesium in assisting liquid phase sintering of aluminum (Al)
by: Jamal, Nur Ayuni Jamal, et al.
Published: (2018)

Effects of bismuth oxide on the sinterability of hydroxyapatite
by: Ramesh, Singh, et al.
Published: (2011)

Selective laser sintering of polymer nanocomposites
by: Wahab, Md Saidin
Published: (2008)

Samarium doped ceria (SDC) electrolyte modification by sintering aids addition to reducing sintering temperature: a review
by: Zolhafizia, J., et al.
Published: (2023)

Study on Machinability of Laser Sintered Materials Fabricated By Layered Manufacturing System: Influence of Different Hardness of Sintered Materials
by: Mohd Sanusi, Abdul Aziz, et al.
Published: (2012)

Effect Of Magnesium And Tin As Sintering Additives On Microstructure And Compressive Properties Of Porous Aluminum
by: Ahmad Hamdi, Amirah
Published: (2018)

Characteristics of iron ore sinter with EFB addition
by: Purwanto, Hadi, et al.
Published: (2018)

Improvement of powder management and recycling in laser sintering
by: Wan Yusoff, Wan Ahmad Yusmawiza, et al.
Published: (2011)

Pressureless sintering of electro-conductive zirconia composites
by: Amiriyan, Mahdi, et al.
Published: (2011)

Effects of powder synthesis method on the sinterability of hydroxyapatite
by: K. L., Aw, et al.
Published: (2011)

Mechanical properties of sintered aluminum alloy compacts
by: Hrairi, Meftah, et al.
Published: (2011)

Characterization And Properties Of Synthesized And Sintered Carbonated Hydroxyapatite
by: Ismail, Yanny Marliana Baba
Published: (2011)

Effect of sintering on hydroxyapatite/sodium alginate properties
by: Kanasan, Nanthini, et al.
Published: (2018)

Moulding parameter optimisation for the best sintered density
by: Jamaludin, Khairur Rijal, et al.
Published: (2009)

Processing, microstructure, and tribological properties of WS2 reinforced aluminium metal matrix composite: laser powder bed fusion vs. spark plasma sintering
by: Li, Peifeng
Published: (2023)

Evaluation of hardness and density properties of sintered Inconel 718 using palm oil-based binder
by: Abu Talib, Abd Rahim, et al.
Published: (2017)

Fabrication of low-cost hip implant using direct metal laser sintering technique
by: Baharuddin, Mohd Yusof, et al.
Published: (2019)

Avoiding the sintering of coal fired shallow fluidized beds
by: Afilaka, Daniel T.
Published: (2016)

Thermal properties of polymer materials in laser sintering process
by: Pham, Duc Trung, et al.
Published: (2011)

Sintering behavior of hydroxyapatite ceramics prepared by different routes
by: Chou Yong, Tan, et al.
Published: (2009)

Sintering behaviour of hydroxyapatite prepared from different routes
by: S., Ramesh, et al.
Published: (2012)

Effect of nano silica on the sinterability of hydroxyapatite dense bodies
by: Ranna, Tolouei, et al.
Published: (2011)

Sintering behavior of hydroxyapatite prepared from different routes
by: Ramesh, Singh, et al.
Published: (2012)

Sintering of hydroxyapatite ceramic produced by wet chemical method
by: Singh, Ramesh, et al.
Published: (2011)

Sintering behaviour of cemented tungsten carbide and steel bilayer
by: Ojo-Kupoluyi, Oluwatosin Job, et al.
Published: (2017)

Simulated selective laser sintering of KCRP for students' creativity
by: Kiani, Golnar, et al.
Published: (2016)

Electrical-field activated sintering and forming of micro-components
by: Zulkipli, Muhammad
Published: (2017)

Supersolidus Sintering And Mechanical Properties Of Water-Atomised M3/2 High-Speed Steel Powder Sintered Under Nitrogen-Based Atmosphere
by: Selamat, Mohd Asri, et al.
Published: (2004)

Biomaterials as implants in the orthopedic field for regenerative medicine: metal versus synthetic polymers
by: Al-Shalawi, Faisal Dakhelallah, et al.
Published: (2023)

Orthopedic information management system (OIMS)
by: Nurul Rasheedah Fateen, Ramli
Published: (2011)